[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Debugging ahcisata?
From: Paul Goyette <paul%whooppee.com@localhost>
Date: Mon, 17 Aug 2009 21:16:52 -0700 (PDT)
> >> I've got a rather old (2+ years) motherboard with a Marvell 88SE614X
> >> SATA II PCI-E Controller which is seen by autoconfig as
> >> vendor 0x11ab product 0x6141 (SATA mass storage, interface 0x81,
> >> revision 0x01) not configured
> Well, I tried adding this controller to the lists of valid devices for
> mvsata, but at boot time it failed with "can't map any registers" so I
> guess mvsata is probably not going to work!
Can you give me your dmesg with 'options PCI_CONFIG_DUMP'?
> (BTW, is it really a good idea to maintain TWO separate lists of
> valid-devices for mvsata? There is one list - in the form of a select
> statement - in sys/dev/pci/mvsata_pci.c, and a separate list - in a
> table - in sys/dev/ic/mvsata.c. It seems to me that these should be
> combined into a singel list/table and shared.)
I will take a proper step perhaps. ;-)
Main Index |
Thread Index |