Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kernel panics while booting
Igor Ralets wrote:
> Hey,
>
> I've compiled -current kernel using GENERIC as a template,
> just uncommenting pf and pflogd, from yesterday's (2008.12.25,
> ~22:00 CET) sources. While trying to boot this kernel, I was
> dropped into db> prompt, when booting almost finished. Last
> line I saw mentioned cron.
>
> Errors were:
> uvm_fault (0xffffffff80c72100,0x0,1)-> e
> fatal page foult in supervisor mode
> trap type 6 code 0 rip ffffffff802a3ab4 cs 8 rflags 10282 cr 2
> 60 cpl 0 rsp ffff800048b4ab20
> kernel: page fault trap, code=0
> Stopped in pid 0.47 (system) at netbsd:
> ffs_update+0x24:testb $0x1,0x60 (%rax)
>
> I checked RAM condition with sysctl/memtester (although only
> ~10% due to whatever limit) and it passed all the tests.
> Editing /etc/fstab to remove journals from all fs's (all but
> / had log) didn't help.
>
> I've compiled another kernel with debugging enabled, as was
> suggested on #netbsd at Freenode. From kern config:
>
> # Diagnostic/debugging support options
> options DIAGNOSTIC # expensive kernel consistency checks
> options DEBUG # expensive debugging checks/support
> options KMEMSTATS # kernel memory statistics (vmstat -m)
>
> Problem persisted, with slightly different fail messages:
>
> panic: kernel diagnostic assertion " vp->v_mount !=NULL @ failed:
> file "/usr/src/sys/ufs/ffs/ffs_inode.c", line 122
> fatal breakpoint in supervisor mode
>
> Dmesg from this box running 5.0_BETA (bit long):
>
> $ dmesg
>
> annel configured to native-PCI mode
> atabus1 at ixpide0 channel 1
> ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
> ohci0: interrupting at ioapic0 pin 16
> ohci0: OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
> ohci1: interrupting at ioapic0 pin 17
> ohci1: OHCI version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
> ohci2: interrupting at ioapic0 pin 18
> ohci2: OHCI version 1.0, legacy support
> usb2 at ohci2: USB revision 1.0
> ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
> ohci3: interrupting at ioapic0 pin 17
> ohci3: OHCI version 1.0, legacy support
> usb3 at ohci3: USB revision 1.0
> ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
> ohci4: interrupting at ioapic0 pin 18
> ohci4: OHCI version 1.0, legacy support
> usb4 at ohci4: USB revision 1.0
> ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
> ehci0: interrupting at ioapic0 pin 19
> ehci0: dropped intr workaround enabled
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
> usb5 at ehci0: USB revision 2.0
> piixpm0 at pci0 dev 20 function 0
> piixpm0: vendor 0x1002 product 0x4385 (rev. 0x13)
> piixpm0: interrupting at SMIpiixpm0: polling
> iic0 at piixpm0: I2C bus
> ixpide1 at pci0 dev 20 function 1
> ixpide1: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide1: bus-master DMA support present
> ixpide1: primary channel configured to compatibility mode
> ixpide1: primary channel interrupting at ioapic0 pin 14
> atabus2 at ixpide1 channel 0
> ixpide1: secondary channel configured to compatibility mode
> ixpide1: secondary channel interrupting at ioapic0 pin 15
> atabus3 at ixpide1 channel 1
> azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
> azalia0: interrupting at ioapic0 pin 16
> azalia0: host: 0x1002/0x4383 (rev. 0), HDA rev. 1.0
> pcib0 at pci0 dev 20 function 3
> pcib0: vendor 0x1002 product 0x438d (rev. 0x00)
> ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
> pci4 at ppb3 bus 4
> pci4: i/o space enabled
> pchb1 at pci0 dev 24 function 0
> pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
> pchb2 at pci0 dev 24 function 1
> pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
> pchb3 at pci0 dev 24 function 2
> pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
> amdtemp0 at pci0 dev 24 function 3
> amdtemp0: AMD CPU Temperature Sensors (K8: core rev BH-F2, socket AM2)
> isa0 at pcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
> audio0 at azalia0: full duplex, independent
> uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub5: 10 ports with 10 removable, self powered
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> wd0 at atabus0 drive 0: <SAMSUNG HD501LJ>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
> wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> wd1 at atabus1 drive 0: <ST3500320AS>
> wd1: quirks 0x2<FORCE_LBA48>
> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
> wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd1(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> atapibus0 at atabus2: 2 targets
> cd0 at atapibus0 drive 0: <DVDRW 20X20X12X, , 6A31> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
> Kernelized RAIDframe activated
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> uvm_fault(0xffffffff80c72100, 0x0, 1) -> e
> fatal page fault in supervisor mode
> trap type 6 code 0 rip ffffffff802a3ab4 cs 8 rflags 10282 cr2 60 cpl
> 0 rsp ffff800048b4ab20
> syncing disks... uvm_fault(0xffffffff80c72100, 0x0, 1) -> e
> fatal page fault in supervisor mode
> trap type 6 code 0 rip ffffffff802a3ab4 cs 8 rflags 10282 cr2 60 cpl
> 0 rsp ffff800048b4a410
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 5.0_BETA (GENERIC) #0: Wed Dec 24 15:47:36 PST 2008
>
> builds@wb28:/home/builds/ab/netbsd-5/amd64/200812240002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/amd64/compile/GENERIC
> total memory = 1919 MB
> avail memory = 1844 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> SMBIOS rev. 2.5 @ 0xf0690 (57 entries)
> System manufacturer System Product Name (System Version)
> mainbus0 (root)
> cpu0 at mainbus0 apid 0: AMD 686-class, 1995MHz, id 0x40fb2
> cpu0: AMD PowerNow! Technology 2000 MHz
> cpu0: available frequencies (Mhz): 1000 1800 2000
> cpu1 at mainbus0 apid 1: AMD 686-class, 1995MHz, id 0x40fb2
> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20080321
> acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,11000726>, AslId <MSFT,00000097>
> acpi0: SCI interrupting at int 9
> acpi0: fixed-feature power button present
> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
> ACPI-Safe 32-bit timer
> attimer1 at acpi0 (TMR, PNP0100): AT Timer
> attimer1: io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800)
> pcppi1: io 0x61
> midi0 at pcppi1: PC speaker (CPU-intensive output)
> sysbeep0 at pcppi1
> aiboost0 at acpi0 (ASOC, ATK0110-16843024)
> aiboost0: ASUS AI Boost Hardware monitor
> hpet0 at acpi0 (HPET, PNP0103)
> hpet0: mem 0xfed00000-0xfed003ff
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> pckbc1 at acpi0 (PS2M, PNP0F03): aux port
> pckbc1: irq 12
> pckbc2 at acpi0 (PS2K, PNP0303): kbd port
> pckbc2: io 0x60,0x64 irq 1
> FDC (PNP0700) at acpi0 not configured
> LPTE (PNP0400) at acpi0 not configured
> UAR1 (PNP0501) at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> attimer1: attached to pcppi1
> pckbd0 at pckbc2 (kbd slot)
> pckbc2: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x1002 product 0x7910 (rev. 0x00)
> ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
> wsmux1: connecting to wsdisplay0
> drm at vga0 not configured
> ppb1 at pci0 dev 6 function 0: vendor 0x1002 product 0x7916 (rev. 0x00)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> wm0 at pci2 dev 0 function 0: Intel i82572EI 1000baseT Ethernet, rev. 6
> wm0: interrupting at ioapic0 pin 18
> wm0: PCI-Express bus
> wm0: 65536 word (16 address bits) SPI EEPROM
> wm0: Ethernet address 00:1b:21:28:a2:e8
> igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
> igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> ppb2 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
> pci3 at ppb2 bus 3
> pci3: memory space enabled, rd/line, wr/inv ok
> vendor 0x1969 product 0x1048 (ethernet network, revision 0xb0) at pci3
> dev 0 function 0 not configured
> ixpide0 at pci0 dev 18 function 0
> ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide0: bus-master DMA support present
> ixpide0: primary channel configured to native-PCI mode
> ixpide0: using ioapic0 pin 22 for native-PCI interrupt
> atabus0 at ixpide0 channel 0
> ixpide0: secondary channel configured to native-PCI mode
> atabus1 at ixpide0 channel 1
> ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
> ohci0: interrupting at ioapic0 pin 16
> ohci0: OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
> ohci1: interrupting at ioapic0 pin 17
> ohci1: OHCI version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
> ohci2: interrupting at ioapic0 pin 18
> ohci2: OHCI version 1.0, legacy support
> usb2 at ohci2: USB revision 1.0
> ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
> ohci3: interrupting at ioapic0 pin 17
> ohci3: OHCI version 1.0, legacy support
> usb3 at ohci3: USB revision 1.0
> ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
> ohci4: interrupting at ioapic0 pin 18
> ohci4: OHCI version 1.0, legacy support
> usb4 at ohci4: USB revision 1.0
> ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
> ehci0: interrupting at ioapic0 pin 19
> ehci0: dropped intr workaround enabled
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
> usb5 at ehci0: USB revision 2.0
> piixpm0 at pci0 dev 20 function 0
> piixpm0: vendor 0x1002 product 0x4385 (rev. 0x13)
> piixpm0: interrupting at SMIpiixpm0: polling
> iic0 at piixpm0: I2C bus
> ixpide1 at pci0 dev 20 function 1
> ixpide1: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide1: bus-master DMA support present
> ixpide1: primary channel configured to compatibility mode
> ixpide1: primary channel interrupting at ioapic0 pin 14
> atabus2 at ixpide1 channel 0
> ixpide1: secondary channel configured to compatibility mode
> ixpide1: secondary channel interrupting at ioapic0 pin 15
> atabus3 at ixpide1 channel 1
> azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
> azalia0: interrupting at ioapic0 pin 16
> azalia0: host: 0x1002/0x4383 (rev. 0), HDA rev. 1.0
> pcib0 at pci0 dev 20 function 3
> pcib0: vendor 0x1002 product 0x438d (rev. 0x00)
> ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
> pci4 at ppb3 bus 4
> pci4: i/o space enabled
> pchb1 at pci0 dev 24 function 0
> pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
> pchb2 at pci0 dev 24 function 1
> pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
> pchb3 at pci0 dev 24 function 2
> pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
> amdtemp0 at pci0 dev 24 function 3
> amdtemp0: AMD CPU Temperature Sensors (K8: core rev BH-F2, socket AM2)
> isa0 at pcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
> audio0 at azalia0: full duplex, independent
> uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub5: 10 ports with 10 removable, self powered
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> wd0 at atabus0 drive 0: <SAMSUNG HD501LJ>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
> wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> wd1 at atabus1 drive 0: <ST3500320AS>
> wd1: quirks 2<FORCE_LBA48>
> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
> wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd1(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> atapibus0 at atabus2: 2 targets
> cd0 at atapibus0 drive 0: <DVDRW 20X20X12X, , 6A31> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
> Kernelized RAIDframe activated
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> syncing disks... done
> unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000,
> 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 5.99.5 (MYKERNEL) #2: Fri Dec 26 09:58:50 CET 2008
> dustman@dhcppc0:/usr/obj/sys/arch/amd64/compile/MYKERNEL
> total memory = 1919 MB
> avail memory = 1844 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> SMBIOS rev. 2.5 @ 0xf0690 (57 entries)
> System manufacturer System Product Name (System Version)
> mainbus0 (root)
> cpu0 at mainbus0 apid 0: AMD 686-class, 1995MHz, id 0x40fb2
> cpu0: AMD PowerNow! Technology 2000 MHz
> cpu0: available frequencies (Mhz): 1000 1800 2000
> cpu1 at mainbus0 apid 1: AMD 686-class, 1995MHz, id 0x40fb2
> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20080321
> acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,11000726>, AslId <MSFT,00000097>
> acpi0: SCI interrupting at int 9
> acpi0: fixed-feature power button present
> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
> ACPI-Safe 32-bit timer
> attimer1 at acpi0 (TMR, PNP0100): AT Timer
> attimer1: io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800)
> pcppi1: io 0x61
> midi0 at pcppi1: PC speaker (CPU-intensive output)
> sysbeep0 at pcppi1
> aiboost0 at acpi0 (ASOC, ATK0110-16843024)
> aiboost0: ASUS AI Boost Hardware monitor
> hpet0 at acpi0 (HPET, PNP0103)
> hpet0: mem 0xfed00000-0xfed003ff
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> pckbc1 at acpi0 (PS2M, PNP0F03): aux port
> pckbc1: irq 12
> pckbc2 at acpi0 (PS2K, PNP0303): kbd port
> pckbc2: io 0x60,0x64 irq 1
> FDC (PNP0700) at acpi0 not configured
> LPTE (PNP0400) at acpi0 not configured
> UAR1 (PNP0501) at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> attimer1: attached to pcppi1
> pckbd0 at pckbc2 (kbd slot)
> pckbc2: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pmsprobe: reset error 5
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x1002 product 0x7910 (rev. 0x00)
> ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
> wsmux1: connecting to wsdisplay0
> drm at vga0 not configured
> ppb1 at pci0 dev 6 function 0: vendor 0x1002 product 0x7916 (rev. 0x00)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> wm0 at pci2 dev 0 function 0: Intel i82572EI 1000baseT Ethernet, rev. 6
> wm0: interrupting at ioapic0 pin 18
> wm0: PCI-Express bus
> wm0: 65536 word (16 address bits) SPI EEPROM
> wm0: Ethernet address 00:1b:21:28:a2:e8
> igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
> igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> ppb2 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
> pci3 at ppb2 bus 3
> pci3: memory space enabled, rd/line, wr/inv ok
> vendor 0x1969 product 0x1048 (ethernet network, revision 0xb0) at pci3
> dev 0 function 0 not configured
> ixpide0 at pci0 dev 18 function 0
> ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide0: bus-master DMA support present
> ixpide0: primary channel configured to native-PCI mode
> ixpide0: using ioapic0 pin 22 for native-PCI interrupt
> atabus0 at ixpide0 channel 0
> ixpide0: secondary channel configured to native-PCI mode
> atabus1 at ixpide0 channel 1
> ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
> ohci0: interrupting at ioapic0 pin 16
> ohci0: OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
> ohci1: interrupting at ioapic0 pin 17
> ohci1: OHCI version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
> ohci2: interrupting at ioapic0 pin 18
> ohci2: OHCI version 1.0, legacy support
> usb2 at ohci2: USB revision 1.0
> ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
> ohci3: interrupting at ioapic0 pin 17
> ohci3: OHCI version 1.0, legacy support
> usb3 at ohci3: USB revision 1.0
> ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
> ohci4: interrupting at ioapic0 pin 18
> ohci4: OHCI version 1.0, legacy support
> usb4 at ohci4: USB revision 1.0
> ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
> ehci0: interrupting at ioapic0 pin 19
> ehci0: dropped intr workaround enabled
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
> usb5 at ehci0: USB revision 2.0
> piixpm0 at pci0 dev 20 function 0
> piixpm0: vendor 0x1002 product 0x4385 (rev. 0x13)
> piixpm0: interrupting at SMIpiixpm0: polling
> iic0 at piixpm0: I2C bus
> ixpide1 at pci0 dev 20 function 1
> ixpide1: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide1: bus-master DMA support present
> ixpide1: primary channel configured to compatibility mode
> ixpide1: primary channel interrupting at ioapic0 pin 14
> atabus2 at ixpide1 channel 0
> ixpide1: secondary channel configured to compatibility mode
> ixpide1: secondary channel interrupting at ioapic0 pin 15
> atabus3 at ixpide1 channel 1
> azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
> azalia0: interrupting at ioapic0 pin 16
> azalia0: host: 0x1002/0x4383 (rev. 0), HDA rev. 1.0
> pcib0 at pci0 dev 20 function 3
> pcib0: vendor 0x1002 product 0x438d (rev. 0x00)
> ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
> pci4 at ppb3 bus 4
> pci4: i/o space enabled
> pchb1 at pci0 dev 24 function 0
> pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
> pchb2 at pci0 dev 24 function 1
> pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
> pchb3 at pci0 dev 24 function 2
> pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
> amdtemp0 at pci0 dev 24 function 3
> amdtemp0: AMD CPU Temperature Sensors (K8: core rev BH-F2, socket AM2)
> isa0 at pcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
> audio0 at azalia0: full duplex, independent
> uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub5: 10 ports with 10 removable, self powered
> ehci0: handing over low speed device on port 4 to ohci1
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> wd0 at atabus0 drive 0: <SAMSUNG HD501LJ>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
> wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> wd1 at atabus1 drive 0: <ST3500320AS>
> wd1: quirks 0x2<FORCE_LBA48>
> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
> wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd1(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> atapibus0 at atabus2: 2 targets
> cd0 at atapibus0 drive 0: <DVDRW 20X20X12X, , 6A31> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
> raidattach: Asked for 8 units
> Kernelized RAIDframe activated
> pad: requested 1 units
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex
> Searching for RAID components...
> boot device: wd0
> root on wd0a dumps on wd0b
> mountroot: trying smbfs...
> mountroot: trying ntfs...
> mountroot: trying nfs...
> mountroot: trying msdos...
> mountroot: trying lfs...
> mountroot: trying ext2fs...
> mountroot: trying ffs...
> root file system type: ffs
> init: copying out path `/sbin/init' 11
> panic: kernel diagnostic assertion "vp->v_mount != NULL" failed: file
> "/usr/src/sys/ufs/ffs/ffs_inode.c", line 122
> fatal breakpoint trap in supervisor mode
> trap type 1 code 0 rip ffffffff802467c5 cs 8 rflags 246 cr2
> 7f7fffffbec0 cpl 0 rsp ffff800048b76a00
> syncing disks... uvm_fault(0xffffffff80cfa200, 0x0, 1) -> e
> fatal page fault in supervisor mode
> trap type 6 code 0 rip ffffffff802b9546 cs 8 rflags 10286 cr2 60 cpl
> 0 rsp ffff800048b76300
> panic: wdc_exec_command: polled command not done
> fatal breakpoint trap in supervisor mode
> trap type 1 code 0 rip ffffffff802467c5 cs 8 rflags 246 cr2 60 cpl 8
> rsp ffff800048b75bf0
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 5.0_BETA (GENERIC) #0: Wed Dec 24 15:47:36 PST 2008
>
> builds@wb28:/home/builds/ab/netbsd-5/amd64/200812240002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/amd64/compile/GENERIC
> total memory = 1919 MB
> avail memory = 1844 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> SMBIOS rev. 2.5 @ 0xf0690 (57 entries)
> System manufacturer System Product Name (System Version)
> mainbus0 (root)
> cpu0 at mainbus0 apid 0: AMD 686-class, 1995MHz, id 0x40fb2
> cpu0: AMD PowerNow! Technology 2000 MHz
> cpu0: available frequencies (Mhz): 1000 1800 2000
> cpu1 at mainbus0 apid 1: AMD 686-class, 1995MHz, id 0x40fb2
> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20080321
> acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,11000726>, AslId <MSFT,00000097>
> acpi0: SCI interrupting at int 9
> acpi0: fixed-feature power button present
> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
> ACPI-Safe 32-bit timer
> attimer1 at acpi0 (TMR, PNP0100): AT Timer
> attimer1: io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800)
> pcppi1: io 0x61
> midi0 at pcppi1: PC speaker (CPU-intensive output)
> sysbeep0 at pcppi1
> aiboost0 at acpi0 (ASOC, ATK0110-16843024)
> aiboost0: ASUS AI Boost Hardware monitor
> hpet0 at acpi0 (HPET, PNP0103)
> hpet0: mem 0xfed00000-0xfed003ff
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> pckbc1 at acpi0 (PS2M, PNP0F03): aux port
> pckbc1: irq 12
> pckbc2 at acpi0 (PS2K, PNP0303): kbd port
> pckbc2: io 0x60,0x64 irq 1
> FDC (PNP0700) at acpi0 not configured
> LPTE (PNP0400) at acpi0 not configured
> UAR1 (PNP0501) at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> attimer1: attached to pcppi1
> pckbd0 at pckbc2 (kbd slot)
> pckbc2: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x1002 product 0x7910 (rev. 0x00)
> ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x7912 (rev. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x791e (rev. 0x00)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
> wsmux1: connecting to wsdisplay0
> drm at vga0 not configured
> ppb1 at pci0 dev 6 function 0: vendor 0x1002 product 0x7916 (rev. 0x00)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> wm0 at pci2 dev 0 function 0: Intel i82572EI 1000baseT Ethernet, rev. 6
> wm0: interrupting at ioapic0 pin 18
> wm0: PCI-Express bus
> wm0: 65536 word (16 address bits) SPI EEPROM
> wm0: Ethernet address 00:1b:21:28:a2:e8
> igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
> igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> ppb2 at pci0 dev 7 function 0: vendor 0x1002 product 0x7917 (rev. 0x00)
> pci3 at ppb2 bus 3
> pci3: memory space enabled, rd/line, wr/inv ok
> vendor 0x1969 product 0x1048 (ethernet network, revision 0xb0) at pci3
> dev 0 function 0 not configured
> ixpide0 at pci0 dev 18 function 0
> ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide0: bus-master DMA support present
> ixpide0: primary channel configured to native-PCI mode
> ixpide0: using ioapic0 pin 22 for native-PCI interrupt
> atabus0 at ixpide0 channel 0
> ixpide0: secondary channel configured to native-PCI mode
> atabus1 at ixpide0 channel 1
> ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
> ohci0: interrupting at ioapic0 pin 16
> ohci0: OHCI version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
> ohci1: interrupting at ioapic0 pin 17
> ohci1: OHCI version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
> ohci2: interrupting at ioapic0 pin 18
> ohci2: OHCI version 1.0, legacy support
> usb2 at ohci2: USB revision 1.0
> ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
> ohci3: interrupting at ioapic0 pin 17
> ohci3: OHCI version 1.0, legacy support
> usb3 at ohci3: USB revision 1.0
> ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
> ohci4: interrupting at ioapic0 pin 18
> ohci4: OHCI version 1.0, legacy support
> usb4 at ohci4: USB revision 1.0
> ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
> ehci0: interrupting at ioapic0 pin 19
> ehci0: dropped intr workaround enabled
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
> usb5 at ehci0: USB revision 2.0
> piixpm0 at pci0 dev 20 function 0
> piixpm0: vendor 0x1002 product 0x4385 (rev. 0x13)
> piixpm0: interrupting at SMIpiixpm0: polling
> iic0 at piixpm0: I2C bus
> ixpide1 at pci0 dev 20 function 1
> ixpide1: ATI Technologies IXP IDE Controller (rev. 0x00)
> ixpide1: bus-master DMA support present
> ixpide1: primary channel configured to compatibility mode
> ixpide1: primary channel interrupting at ioapic0 pin 14
> atabus2 at ixpide1 channel 0
> ixpide1: secondary channel configured to compatibility mode
> ixpide1: secondary channel interrupting at ioapic0 pin 15
> atabus3 at ixpide1 channel 1
> azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
> azalia0: interrupting at ioapic0 pin 16
> azalia0: host: 0x1002/0x4383 (rev. 0), HDA rev. 1.0
> pcib0 at pci0 dev 20 function 3
> pcib0: vendor 0x1002 product 0x438d (rev. 0x00)
> ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
> pci4 at ppb3 bus 4
> pci4: i/o space enabled
> pchb1 at pci0 dev 24 function 0
> pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
> pchb2 at pci0 dev 24 function 1
> pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
> pchb3 at pci0 dev 24 function 2
> pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
> amdtemp0 at pci0 dev 24 function 3
> amdtemp0: AMD CPU Temperature Sensors (K8: core rev BH-F2, socket AM2)
> isa0 at pcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
> audio0 at azalia0: full duplex, independent
> uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub5: 10 ports with 10 removable, self powered
> uhidev0 at uhub1 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> wd0 at atabus0 drive 0: <SAMSUNG HD501LJ>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
> wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> wd1 at atabus1 drive 0: <ST3500320AS>
> wd1: quirks 2<FORCE_LBA48>
> wd1: drive supports 16-sector PIO transfers, LBA48 addressing
> wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd1(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> atapibus0 at atabus2: 2 targets
> cd0 at atapibus0 drive 0: <DVDRW 20X20X12X, , 6A31> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
> Kernelized RAIDframe activated
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
>
>
> Regards,
> Igor Ralets
>
> P.S. Please CC to me when you reply to this message.
>
This is fixed in ufs/ffs/ffs_vnops.c, rev. 1.108.
Christoph
Home |
Main Index |
Thread Index |
Old Index