Re: amd64 freeze during boot

[Geert Hendrickx <ghen%telenet.be@localhost>]

On Wed, Aug 27, 2008 at 03:25:08PM -0500, Jeremy C. Reed wrote:
> Yes, I have several. I placed two at
> http://www.reedmedia.net/~reed/tmp-ncoit53ut/ The one ending with "b" has
> previous arch/x86/x86/intr.c version.  So if "b" boots and other doesn't
> you can track it down to that source change.


With both your patched and unpatched 4.99.62 kernels my system reboots
immediatly after loading the kernel... (I think while probing the cpu's)

FWIW, I've attached the dmesg of a (working) netbsd-4 kernel.

        Geert


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_STABLE (INSTALL_LARGE) #0: Tue Aug  5 12:20:45 PDT 2008
        
builds@wb37:/home/builds/ab/netbsd-4/i386/200808050002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/i386/compile/INSTALL_LARGE
total memory = 3326 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3256 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Calibrating TSC clock ... TSC clock: 2660111280 Hz
BIOS32 rev. 0 found at 0xfb9d0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium III (Katmai) (686-class), 2660.17 MHz, id 0x10677
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 8e3fd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: "Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 332 MHz
cpu1 at mainbus0: apid 3 (application processor)
cpu1: not started
cpu2 at mainbus0: apid 2 (application processor)
cpu2: not started
cpu3 at mainbus0: apid 1 (application processor)
cpu3: not started
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 4
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL  , FX09   ,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0C [ACPI power button device] at acpi0 not configured
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
ACPI Object Type 'Thermal' (0x0d) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29c0 (rev. 0x02)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x94c3 (rev. 0x00)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wm0 at pci0 dev 25 function 0: 82801I LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 20 (irq 10)
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:21:9b:07:35:3e
inphy0 at wm0 phy 1: i82562EM 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 19 (irq 9)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
vendor 0x8086 product 0x293e (multimedia subclass 0x03, revision 0x02) at pci0 
dev 27 function 0 not configured
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 23 (irq 4)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 19 (irq 11)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 18 (irq 9)
usb6 at uhci5: USB revision 1.0
uhub6 at usb6
uhub6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 4)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
uhub7 at usb7
uhub7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2916 (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 (irq 11) for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
vendor 0x8086 product 0x2930 (SMBus serial bus, revision 0x02) at pci0 dev 31 
function 3 not configured
piixide1 at pci0 dev 31 function 5
piixide1: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 19 (irq 11) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "TSC" frequency 2660111280 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
umass0 at uhub7 port 5 configuration 1 interface 0
umass0: TEAC CA-200, rev 2.00/4.08, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <TEAC, USB   HS-CF Card, 4.08> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <TEAC, USB   HS-xD/SM, 4.08> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <TEAC, USB   HS-MS Card, 4.08> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <TEAC, USB   HS-SD Card, 4.08> disk removable
sd3: drive offline
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1
uhid at uhidev0 not configured
wd0 at atabus0 drive 0: <ST3500620AS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <ST3500620AS>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: Dell Dell USB Keyboard, rev 1.10/3.06, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpDVD-ROM TS-H353B, , D500> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus1 at atabus3: 2 targets
cd1 at atapibus1 drive 0: <Optiarc DVD+/-RW AD-7200S, , 101A> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd1(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
sd0(umass0:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd1(umass0:0:0:1): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass0:0:0:2): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd3(umass0:0:0:3): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd0(umass0:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd1(umass0:0:0:1): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass0:0:0:2): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd3(umass0:0:0:3): not ready, data = 00 00 00 00 3a 00 00 00 00 00
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 21 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console