Hello,
I tried adding VESA support to my DRM+Eee_ath_patch 4.99.68/i386 kernel.
I did configure VESA for 640x480 and 800x600.
Both VESA modes worked OK but when I started Xorg ddb appeared saying:
uvm_fault (0xcc4beaf0, 0, 2)->0xe
fatal page fault in supervisor mode
trap type 6 code 2 eip c031cae2 cs8 eflags 13246 cr2 120 ilevel 0
kernel: supervisor trap page fault, code = 0
Stopped in pid 1231.1 (Xorg) at netbsd: drm_open_helper+0x22: movl
%edx, 0x120(%edi)
Installed packages are:
modular-xorg-server-1.4.2.0nb1 Xorg X11 Server from modular X.org X11
MesaLib-7.0.3.3nb4 Graphics library similar to SGI's OpenGL
xf86-video-i740-1.1.0 Modular Xorg Intel i740 video driver
xf86-video-intel-2.3.2 Modular Xorg Intel video driver
glu-7.0.3.3nb1 GLU polygon tessellation facility for Mesa
dmesg is attached.
Since I remove VESA from the kernel configuration file, everything works
normaly.
Isn't it possible to get both VESA and DRM ?
TIA,
Jo
NetBSD 4.99.68 (TUMFATIG) #2: Thu Aug 14 22:30:07 CEST 2008
root%pak.tumfatig.net@localhost:/home/cvs/src-HEAD/sys/arch/i386/compile/TUMFATIG
total memory = 2039 MB
avail memory = 1991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK Computer INC. 900 (0501)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 900MHz, id 0x6d8
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
vesabios0 at mainbus0: version 3.0, Intel Corporation Intel(r)915GM/910ML/915MS
Graphics Controller
vesafb0 at vesabios0: VESA frame buffer
vesafb0: fb 800x600x8 @0xd0000000
vesafb0: 487 Kb memory reported, 1 screens possible
vesafb0: one screen, so hardware scrolling not possible
vesafb0: VBE/PM 1.0
wsdisplay0 at vesafb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,07000807>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A00): aux port
pckbc2: irq 12
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: ASUS, LION, 900
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
asus0 at acpi0 (ATKD, ASUS010-16843008)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
pchb0: returns constant 0xff stream, RNG disabled.
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vendor 0x8086 product 0x2592 (VGA display, revision 0x04) at pci0 dev 2
function 0 not configured
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev
2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04)
pci1 at ppb0 bus 4
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04)
pci2 at ppb1 bus 3
pci2: memory space enabled, rd/line, wr/inv ok
lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet
lii0: Ethernet address 00:22:15:02:48:6d
lii0: interrupting at ioapic0 pin 17
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0002, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04)
pci3 at ppb2 bus 1
pci3: memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: mac 14.2 phy 7.0 radio 10.2
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci4 at ppb3 bus 5
pci4: no spaces enabled!
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 2048MB, 667MHz, PC2-5300
spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 3.00ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev.
1.0
audio0 at azalia0: full duplex, independent
: <ASUS-PHISON OB SSD>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 3847 MB, 7818 cyl, 16 head, 63 sec, 512 bytes/sect x 7880544 sectors
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus1 drive 1: <ASUS-PHISON SSD>
wd1: drive supports 1-sector PIO transfers, LBA addressing
wd1: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: ENE UB6225, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable
sd0: fabricating a geometry
sd0: 15326 MB, 15326 cyl, 64 head, 32 sec, 512 bytes/sect x 31388672 sectors
sd0: fabricating a geometry
raidattach: Asked for 8 units
Kernelized RAIDframe activated
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
Searching for RAID components...
boot device: wd1
root on wd1a dumps on wd1b
dump_misc_init: max_paddr = 0x7f780000
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (fb, vt100 emulation)
wsdisplay0: screen 2 added (fb, vt100 emulation)
wsdisplay0: screen 3 added (fb, vt100 emulation)
wsdisplay0: screen 4 added (fb, vt100 emulation)
Attachment:
pgpehwmPu33kH.pgp
Description: PGP signature