Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Weird interrupt issues with -current
I updated my kernel from May 28th to today (June 3rd), and found that at
least two of my NICs didn't seem to communicate properly. The "msk0"
didn't spit out any error messages, but it didn't pass traffic either.
:-) My "ex0" kept printing "device timeout", and didn't seem to pass
traffic at all.
The before and after dmesg's are attached, but diff is:
2c7
< NetBSD 4.99.64 (INTREPID.P5W) #1: Tue Jun 3 19:19:09 PDT 2008
---
> NetBSD 4.99.63 (INTREPID.P5W) #0: Wed May 28 18:13:50 PDT 2008
57c62
< , Yukon-2 EC rev. A3 (0x2): ioapic0 pin 16
---
> , Yukon-2 EC rev. A3 (0x2): ioapic0 pin 19
90c95
< ex0: interrupting at ioapic0 pin 17
---
> ex0: interrupting at ioapic0 pin 22
128c133
< timecounter: Timecounter "TSC" frequency 2703547170 Hz quality 3000
---
> timecounter: Timecounter "TSC" frequency 2703544650 Hz quality 3000
I'm not sure why the different interrupt routing happened, but it
doesn't seem good. :-)
What other info can I provide?
ScottE
NetBSD 4.99.64 (INTREPID.P5W) #1: Tue Jun 3 19:19:09 PDT 2008
scotte@intrepid:/nbu/source/netbsd/src/obj.amd64/nbu/source/netbsd/src/sys/arch/amd64/compile/INTREPID.P5W
total memory = 4095 MB
avail memory = 3953 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xf0690 (72 entries)
ASUSTEK COMPUTER INC P5W DH Deluxe (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2703MHz, id 0x6f6
cpu1 at mainbus0 apid 1: Intel 686-class, 2703MHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,03000820>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
sysbeep0 at pcppi0
fdc0 at acpi0 (FDC, PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: expected BUFFER, got 4
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
aiboost0 at acpi0 (ASOC, ATK0110-16843024)
aiboost0: ASUS AI Boost Hardware monitor
com0 at acpi0 (UAR1, PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com0: console
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer0: attached to pcppi0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x277c (rev. 0xc0)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x277d (rev. 0xc0)
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x10de product 0x01d1 (VGA display, revision 0xa1) at pci1 dev 0
function 0 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 19
azalia0: host: 0x8086/0x27d8 (rev. 1), HDA rev. 1.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci2 at ppb1 bus 4
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC rev. A3 (0x2): ioapic0 pin 16
msk0 at mskc0 port A: Ethernet address 00:1b:fc:03:ee:42
makphy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
mskc1 at pci4 dev 0 function 0mskc1: interrupt moderation is 0 us
, Yukon-2 EC rev. A3 (0x2): ioapic0 pin 16
msk1 at mskc1 port A: Ethernet address 00:1b:fc:03:e3:60
makphy1 at msk1 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 20
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled
ex0 at pci5 dev 1 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at ioapic0 pin 17
ex0: MAC address 00:50:04:78:77:9c
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c1
ahcisata0: interrupting at ioapic0 pin 23
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc720e000
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
atabus5 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 2048MB, 800MHz, PC2-6400
spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x52
spdmem1: DDR2 SDRAM memory, no parity or ECC, 2048MB, 800MHz, PC2-6400
spdmem1: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2703547170 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
azalia0: codec[0]: Realtek ALC882 (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
wd0 at atabus2 drive 0: <WDC WD5000YS-01MPB1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
ahcisata0 port 1: PHY offline
wd1 at atabus4 drive 0: <WDC WD5000YS-01MPB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd2 at atabus5 drive 0: <WDC WD5000YS-01MPB1>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
uplcom0 at uhub2 port 1
uplcom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 2
ucom0 at uplcom0
uhub5 at uhub4 port 7: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr
2
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
uplcom1 at uhub2 port 2
uplcom1: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 3
ucom1 at uplcom1
ugen0 at uhub5 port 3
ugen0: vendor 0x0bda RTL8187_Wireless, rev 2.00/1.00, addr 3
Kernelized RAIDframe activated
swwdog0: software watchdog initialized
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd2a
raid0: Total Sectors: 976772992 (476939 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
mskc0: interrupt moderation is 1000 us
mskc1: interrupt moderation is 1000 us
ex0: device timeout
ex0: device timeout
ex0: device timeout
ex0: device timeout
ex0: device timeout
ex0: device timeout
ex0: device timeout
ex0: device timeout
ex0: device timeout
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.63 (INTREPID.P5W) #0: Wed May 28 18:13:50 PDT 2008
scotte@intrepid:/nbu/source/netbsd/src/obj.amd64/nbu/source/netbsd/src/sys/arch/amd64/compile/INTREPID.P5W
total memory = 4095 MB
avail memory = 3953 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xf0690 (72 entries)
ASUSTEK COMPUTER INC P5W DH Deluxe (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2703MHz, id 0x6f6
cpu1 at mainbus0 apid 1: Intel 686-class, 2703MHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,03000820>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
sysbeep0 at pcppi0
fdc0 at acpi0 (FDC, PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: expected BUFFER, got 4
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
aiboost0 at acpi0 (ASOC, ATK0110-16843024)
aiboost0: ASUS AI Boost Hardware monitor
com0 at acpi0 (UAR1, PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com0: console
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer0: attached to pcppi0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x277c (rev. 0xc0)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x277d (rev. 0xc0)
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x10de product 0x01d1 (VGA display, revision 0xa1) at pci1 dev 0
function 0 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 19
azalia0: host: 0x8086/0x27d8 (rev. 1), HDA rev. 1.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci2 at ppb1 bus 4
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC rev. A3 (0x2): ioapic0 pin 19
msk0 at mskc0 port A: Ethernet address 00:1b:fc:03:ee:42
makphy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
mskc1 at pci4 dev 0 function 0mskc1: interrupt moderation is 0 us
, Yukon-2 EC rev. A3 (0x2): ioapic0 pin 16
msk1 at mskc1 port A: Ethernet address 00:1b:fc:03:e3:60
makphy1 at msk1 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 20
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled
ex0 at pci5 dev 1 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at ioapic0 pin 22
ex0: MAC address 00:50:04:78:77:9c
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c1
ahcisata0: interrupting at ioapic0 pin 23
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc720e000
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
atabus5 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 2048MB, 800MHz, PC2-6400
spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x52
spdmem1: DDR2 SDRAM memory, no parity or ECC, 2048MB, 800MHz, PC2-6400
spdmem1: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2703544650 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
azalia0: codec[0]: Realtek ALC882 (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
wd0 at atabus2 drive 0: <WDC WD5000YS-01MPB1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
ahcisata0 port 1: PHY offline
wd1 at atabus4 drive 0: <WDC WD5000YS-01MPB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd2 at atabus5 drive 0: <WDC WD5000YS-01MPB1>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
uplcom0 at uhub2 port 1
uplcom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 2
ucom0 at uplcom0
uhub5 at uhub4 port 7: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr
2
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
uplcom1 at uhub2 port 2
uplcom1: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 3
ucom1 at uplcom1
ugen0 at uhub5 port 3
ugen0: vendor 0x0bda RTL8187_Wireless, rev 2.00/1.00, addr 3
Kernelized RAIDframe activated
swwdog0: software watchdog initialized
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd2a
raid0: Total Sectors: 976772992 (476939 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
mskc0: interrupt moderation is 1000 us
mskc1: interrupt moderation is 1000 us
Home |
Main Index |
Thread Index |
Old Index