...
> Am 10.05.2021 um 15:50 schrieb oskar%fessel.org@localhost:
>
> Hej,
>
> i cannot figure out how to boot a netbsd dom0 successfully on my HP Proliant DL380p G8 server.
> When running -current native, all is fine (apart from: sometimes it does not shutdown or reboot from netbsd…)
> When trying to boot xen (4.11,4.13 or 4.15)
> I either get the heap full error:
>
>> 2907120+1332240=0x40b0ec
>> Loading /netbsd-XEN3_DOM0-9-99-77.gz
>> heap full (0x68e8c+32768)
>
> or, if successful (current xen and DOM0) it gets stuck:
> [ 4.5901075] uhub5 at uhub4 port 3: vendor 0424 (0x0424) product 2660 (0x2660)
> , class 9/0, rev 2.00/8.01, addr 3
> [ 4.5901075] uhub5: single transaction translator
> [ 9.0001054] uhub1: device problem, disabling port 1
> [ 32.1900991] ipmi0: ID 19.2 IPMI 2.0 Available
> [ 61.0001059] ciss0: workqueue busy: updates stopped
> [ 66.6600990] uhub1: device problem, disabling port 1
> [ 91.0001083] ciss0: unqueued ccb 0xffff8a004e3b2c00 ready, state=0x10
> [ 121.3701129] uhub1: device problem, disabling port 1
> [ 151.0000993] ciss0: unqueued ccb 0xffff8a004e3b2a00 ready, state=0x10
> [ 175.7601056] uhub1: device problem, disabling port 1
> [ 211.0000992] ciss0: unqueued ccb 0xffff8a004e3b2800 ready, state=0x10
> [ 230.4701037] uhub1: device problem, disabling port 1
> [ 284.8601069] uhub1: device problem, disabling port 1
> [ 339.5701005] uhub1: device problem, disabling port 1
> [ 393.9601063] uhub1: device problem, disabling port 1
> [ 450.6600987] uhub1: device problem, disabling port 1
> [ 505.3701061] uhub1: device problem, disabling port 1
> [ 559.7601052] uhub1: device problem, disabling port 1
> [ 614.4701054] uhub1: device problem, disabling port 1
> [ 668.8600990] uhub1: device problem, disabling port 1
> [ 723.5701003] uhub1: device problem, disabling port 1
> [ 777.9601056] uhub1: device problem, disabling port 1
>
> unfortunately the console output is via iLO and so it is not easy to capture (for me, that is):
>
> [ 1.0200884] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
> [ 1.0200884] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
> [ 1.0200884] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
>
> Any help on that available? Also pointers on how to setup a working bootloader would be nice ;-)
>
> Cheers
> Oskar
>
maybe this is a little bit better:
>> NetBSD/x86 BIOS Boot, Revision 5.11 (Sun Oct 13 01:50:47 UTC 2019) (from NetBSD 9.99.15)
>> Memory: 621/3144704 k
1. Boot normally
2. Boot single user
3. Drop to boot prompt
4. Boot netbsd.alt
5. Boot Xen
6. Boot Xen com
7. Boot Xen 9.99.81
8. Boot Xen 9.99.77
9. Boot Xen 9.99.73
Choose an option; RETURN for default; SPACE to stop countdown.
Option 8 will be chosen in 0 seconds.
Option: [8]:6
2526160+1352752=0x3b30ec
Loading /netbsd-XEN3_DOM0.gz
heap full (0x68f68+32768)
Non-System disk or disk error
replace and strike any key when ready
Press "F9" key for ROM-Based Setup Utility
Press "F10" key for Intelligent Provisioning
For access via BIOS Serial Console
Press "ESC+9" for ROM-Based Setup Utility
Press "ESC+0" for Intelligent Provisioning
System will automatically reboot in 1 seconds
Option: [8]:7
2907120+1332240=0x40b0ec
Loading /netbsd-XEN3_DOM0-9-99-81.gz
Start @ 0x200000 [1=0x60b000-0x60b0ec]...
Xen 4.15.0nb0
(XEN) Xen version 4.15.0nb0 (root@) (gcc (nb1 20200907) 9.3.0) debug=y Thu May 6 21:25:21 CEST 2021
(XEN) Latest ChangeSet:
(XEN) build-id: f2fd66966d62a78cede92c92ed2ef7468a0b1b80
(XEN) Bootloader: NetBSD/x86 BIOS Boot, Revision 5.11 (Sun Oct 13 01:50:47 UTC 2019) (from NetBSD 9.99.15)
(XEN) Command line: bootscrub=false dom0_mem=1024M dom0_max_vcpus=1 console=com2 com2=115200,8n1,0x2f8
(XEN) Xen image load base address: 0
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 7 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) CPU Vendor: Intel, Family 6 (0x6), Model 45 (0x2d), Stepping 7 (raw 000206d7)
(XEN) Xen-e820 RAM map:
(XEN) [0000000000000000, 000000000009b3ff] (usable)
(XEN) [000000000009b400, 000000000009ffff] (reserved)
(XEN) [00000000000f0000, 00000000000fffff] (reserved)
(XEN) [0000000000100000, 00000000bddabfff] (usable)
(XEN) [00000000bddac000, 00000000bddddfff] (ACPI data)
(XEN) [00000000bddde000, 00000000cfffffff] (reserved)
(XEN) [00000000fec00000, 00000000fee0ffff] (reserved)
(XEN) [00000000ff800000, 00000000ffffffff] (reserved)
(XEN) [0000000100000000, 000000203fffefff] (usable)
(XEN) New Xen image base address: 0xbd400000
(XEN) ACPI: RSDP 000F4F00, 0024 (r2 HP )
(XEN) ACPI: XSDT BDDAED00, 00EC (r1 HP ProLiant 2 ? 162E)
(XEN) ACPI: FACP BDDAEE40, 00F4 (r3 HP ProLiant 2 ? 162E)
(XEN) ACPI: DSDT BDDAEF40, 26DC (r1 HP DSDT 1 INTL 20030228)
(XEN) ACPI: FACS BDDAC140, 0040
(XEN) ACPI: SPCR BDDAC180, 0050 (r1 HP SPCRRBSU 1 ? 162E)
(XEN) ACPI: MCFG BDDAC200, 003C (r1 HP ProLiant 1 0)
(XEN) ACPI: HPET BDDAC240, 0038 (r1 HP ProLiant 2 ? 162E)
(XEN) ACPI: FFFF BDDAC280, 0064 (r2 HP ProLiant 2 ? 162E)
(XEN) ACPI: SPMI BDDAC300, 0040 (r5 HP ProLiant 1 ? 162E)
(XEN) ACPI: ERST BDDAC340, 0230 (r1 HP ProLiant 1 ? 162E)
(XEN) ACPI: APIC BDDAC580, 026A (r1 HP ProLiant 2 0)
(XEN) ACPI: SRAT BDDAC800, 0750 (r1 HP Proliant 1 ? 162E)
(XEN) ACPI: FFFF BDDACF80, 0176 (r1 HP ProLiant 1 ? 162E)
(XEN) ACPI: BERT BDDAD100, 0030 (r1 HP ProLiant 1 ? 162E)
(XEN) ACPI: HEST BDDAD140, 00BC (r1 HP ProLiant 1 ? 162E)
(XEN) ACPI: DMAR BDDAD200, 051C (r1 HP ProLiant 1 ? 162E)
(XEN) ACPI: FFFF BDDAEC40, 0030 (r1 HP ProLiant 1 0)
(XEN) ACPI: PCCT BDDAEC80, 006E (r1 HP Proliant 1 PH 504D)
(XEN) ACPI: SSDT BDDB1640, 07EA (r1 HP DEV_PCI1 1 INTL 20120503)
(XEN) ACPI: SSDT BDDB1E40, 0103 (r3 HP CRSPCI0 2 HP 1)
(XEN) ACPI: SSDT BDDB1F80, 0098 (r3 HP CRSPCI1 2 HP 1)
(XEN) ACPI: SSDT BDDB2040, 038A (r2 HP riser0 2 INTL 20030228)
(XEN) ACPI: SSDT BDDB2400, 0536 (r3 HP riser1a 2 INTL 20030228)
(XEN) ACPI: SSDT BDDB2940, 0537 (r3 HP riser2a 2 INTL 20030228)
(XEN) ACPI: SSDT BDDB2E80, 0BB9 (r1 HP pcc 1 INTL 20120503)
(XEN) ACPI: SSDT BDDB3A40, 0377 (r1 HP pmab 1 INTL 20120503)
(XEN) ACPI: SSDT BDDB3DC0, 5524 (r1 HP pcc2 1 INTL 20120503)
(XEN) ACPI: SSDT BDDB9300, 3AEC (r1 INTEL PPM RCM 1 INTL 20061109)
(XEN) System RAM: 131037MB (134182168kB)
(XEN) SRAT: Node 0 PXM 0 0-1040000000
(XEN) SRAT: Node 1 PXM 1 1040000000-2040000000
(XEN) NUMA: Allocated memnodemap from 203fff9000 - 203fffa000
(XEN) NUMA: Using 18 for the hash shift.
(XEN) Domain heap initialised DMA width 32 bits
(XEN) found SMP MP-table at 000f4f80
(XEN) DMI 2.8 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x908 (24 bits)
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:904,1:0], pm1x_evt[1:900,1:0]
(XEN) ACPI: wakeup_vec[bddac14c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec10000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec40000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base c0000000 segment 0000 buses 00 - ff
(XEN) PCI: MCFG area at c0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) [VT-D] RMRR [e8000,e8fff] not in reserved memory; need "iommu_inclusive_mapping=1"?
(XEN) Xen ERST support is initialized.
(XEN) HEST: Table parsing has been initialized
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 64 CPUs (40 hotplug CPUs)
(XEN) IRQ limits: 72 GSI, 4920 MSI/MSI-X
(XEN) Not enabling x2APIC (upon firmware request)
(XEN) CPU0: 1200 ... 2500 MHz
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) mce_intel.c:773: MCA Capability: firstbank 0, extended MCE MSR 0, BCAST, SER
(XEN) CPU0: Intel machine check reporting enabled
(XEN) Speculative mitigation facilities:
(XEN) Hardware features: IBRS/IBPB STIBP L1D_FLUSH SSBD MD_CLEAR
(XEN) Compiled-in support: INDIRECT_THUNK SHADOW_PAGING
(XEN) Xen settings: BTI-Thunk RETPOLINE, SPEC_CTRL: IBRS- SSBD-, Other: IBPB L1D_FLUSH VERW BRANCH_HARDEN
(XEN) L1TF: believed vulnerable, maxphysaddr L1D 46, CPUID 46, Safe address 300000000000
(XEN) Support for HVM VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR
(XEN) Support for PV VMs: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR
(XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (without PCID)
(XEN) PV L1TF shadowing: Dom0 disabled, DomU enabled
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Initializing Credit2 scheduler
(XEN) load_precision_shift: 18
(XEN) load_window_shift: 30
(XEN) underload_balance_tolerance: 0
(XEN) overload_balance_tolerance: -3
(XEN) runqueues arrangement: socket
(XEN) cap enforcement granularity: 10ms
(XEN) load tracking window length 1073741824 ns
(XEN) Platform timer is 14.318MHz HPET
(XEN) Detected 2493.776 MHz processor.
(XEN) Freed 1024kB unused BSS memory
(XEN) alt table ffff82d04049b430 -> ffff82d0404aa2ca
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Posted Interrupt not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) nr_sockets: 4
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Defaulting to alternative key handling; send 'A' to switch to normal mode.
(XEN) Allocated console ring of 256 KiB.
(XEN) mwait-idle: MWAIT substates: 0x21120
(XEN) mwait-idle: v0.4.1 model 0x2d
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) VMX: Disabling executable EPT superpages due to CVE-2018-12207
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) alt table ffff82d04049b430 -> ffff82d0404aa2ca
(XEN) Brought up 24 CPUs
(XEN) Scheduling granularity: cpu, 1 CPU per sched-resource
(XEN) Adding cpu 0 to runqueue 0
(XEN) First cpu on runqueue, activating
(XEN) Adding cpu 1 to runqueue 0
(XEN) Adding cpu 2 to runqueue 0
(XEN) Adding cpu 3 to runqueue 0
(XEN) Adding cpu 4 to runqueue 0
(XEN) Adding cpu 5 to runqueue 0
(XEN) Adding cpu 6 to runqueue 0
(XEN) Adding cpu 7 to runqueue 0
(XEN) Adding cpu 8 to runqueue 0
(XEN) Adding cpu 9 to runqueue 0
(XEN) Adding cpu 10 to runqueue 0
(XEN) Adding cpu 11 to runqueue 0
(XEN) Adding cpu 12 to runqueue 1
(XEN) First cpu on runqueue, activating
(XEN) Adding cpu 13 to runqueue 1
(XEN) Adding cpu 14 to runqueue 1
(XEN) Adding cpu 15 to runqueue 1
(XEN) Adding cpu 16 to runqueue 1
(XEN) Adding cpu 17 to runqueue 1
(XEN) Adding cpu 18 to runqueue 1
(XEN) Adding cpu 19 to runqueue 1
(XEN) Adding cpu 20 to runqueue 1
(XEN) Adding cpu 21 to runqueue 1
(XEN) Adding cpu 22 to runqueue 1
(XEN) Adding cpu 23 to runqueue 1
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Running stub recovery selftests...
(XEN) Fixup #UD[0000]: ffff82d07fffe040 [ffff82d07fffe040] -> ffff82d040396a17
(XEN) Fixup #GP[0000]: ffff82d07fffe041 [ffff82d07fffe041] -> ffff82d040396a17
(XEN) Fixup #SS[0000]: ffff82d07fffe040 [ffff82d07fffe040] -> ffff82d040396a17
(XEN) Fixup #BP[0000]: ffff82d07fffe041 [ffff82d07fffe041] -> ffff82d040396a17
(XEN) NX (Execute Disable) protection active
(XEN) Dom0 has maximum 280 PIRQs
(XEN) *** Building a PV Dom0 ***
(XEN) ELF: phdr: paddr=0xffffffff80200000 memsz=0xe0e000
(XEN) ELF: memory: 0xffffffff80200000 -> 0xffffffff8100e000
(XEN) ELF: note: GUEST_OS = "NetBSD"
(XEN) ELF: note: GUEST_VERSION = "4.99"
(XEN) ELF: note: XEN_VERSION = "xen-3.0"
(XEN) ELF: note: VIRT_BASE = 0xffffffff80000000
(XEN) ELF: note: PADDR_OFFSET = 0xffffffff80000000
(XEN) ELF: note: ENTRY = 0xffffffff8023b000
(XEN) ELF: note: HYPERCALL_PAGE = 0xffffffff8023c000
(XEN) ELF: note: HV_START_LOW = 0xffff800000000000
(XEN) ELF: note: FEATURES = "writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel|hvm_callback_vector"
(XEN) ELF: note: PAE_MODE = "yes"
(XEN) ELF: note: unknown (0xd)
(XEN) ELF: note: LOADER = "generic"
(XEN) ELF: note: SUSPEND_CANCEL = 0
(XEN) ELF: note: BSD_SYMTAB = "yes"
(XEN) ELF: using notes from SHT_NOTE section
(XEN) ELF: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0xffffffff80000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xffffffff80200000
(XEN) virt_kend = 0xffffffff81164cd0
(XEN) virt_entry = 0xffffffff8023b000
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 -> 0xffffffff8100e000
(XEN) Dom0 symbol map 0xffffffff8100e000 -> 0xffffffff81164cd0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000001030000000->0000001032000000 (253952 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff81164cd0
(XEN) Init. ramdisk: ffffffff81165000->ffffffff81165000
(XEN) Phys-Mach map: ffffffff81165000->ffffffff81365000
(XEN) Start info: ffffffff81365000->ffffffff813654b8
(XEN) Xenstore ring: 0000000000000000->0000000000000000
(XEN) Console ring: 0000000000000000->0000000000000000
(XEN) Page tables: ffffffff81366000->ffffffff81373000
(XEN) Boot stack: ffffffff81373000->ffffffff81374000
(XEN) TOTAL: ffffffff80000000->ffffffff81400000
(XEN) ENTRY ADDRESS: ffffffff8023b000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) ELF: phdr 0 at 0xffffffff80200000 -> 0xffffffff80e990f0
(XEN) Masked UR signaling on 0000:00:00.0
(XEN) Masked UR signaling on 0000:00:01.0
(XEN) Masked UR signaling on 0000:00:01.1
(XEN) Masked UR signaling on 0000:00:02.0
(XEN) Masked UR signaling on 0000:00:02.1
(XEN) Masked UR signaling on 0000:00:02.2
(XEN) Masked UR signaling on 0000:00:02.3
(XEN) Masked UR signaling on 0000:00:03.0
(XEN) Masked UR signaling on 0000:00:03.1
(XEN) Masked UR signaling on 0000:00:03.2
(XEN) Masked UR signaling on 0000:00:03.3
(XEN) Masked VT-d error signaling on 0000:00:05.0
(XEN) Masked UR signaling on 0000:20:00.0
(XEN) Masked UR signaling on 0000:20:01.0
(XEN) Masked UR signaling on 0000:20:01.1
(XEN) Masked UR signaling on 0000:20:02.0
(XEN) Masked UR signaling on 0000:20:02.1
(XEN) Masked UR signaling on 0000:20:02.2
(XEN) Masked UR signaling on 0000:20:02.3
(XEN) Masked UR signaling on 0000:20:03.0
(XEN) Masked UR signaling on 0000:20:03.1
(XEN) Masked UR signaling on 0000:20:03.2
(XEN) Masked UR signaling on 0000:20:03.3
(XEN) Masked VT-d error signaling on 0000:20:05.0
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) ***************************************************
(XEN) Booted on L1TF-vulnerable hardware with SMT/Hyperthreading
(XEN) enabled. Please assess your configuration and choose an
(XEN) explicit 'smt=<bool>' setting. See XSA-273.
(XEN) ***************************************************
(XEN) Booted on MLPDS/MFBDS-vulnerable hardware with SMT/Hyperthreading
(XEN) enabled. Mitigations will not be fully effective. Please
(XEN) choose an explicit smt=<bool> setting. See XSA-297.
(XEN) ***************************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
(XEN) Freed 612kB init memory
(XEN) emul-priv-op.c:1173:d0v0 WRMSR 0x00000277 val 0x0007010600070106 unimplemented
(XEN) d0v0 Unhandled general protection fault fault/trap [#13, ec=0000]
(XEN) domain_crash_sync called from entry.S: fault at ffff82d040318336 x86_64/entry.S#create_bounce_frame+0x15d/0x177
(XEN) Domain 0 (vcpu#0) crashed on cpu#13:
(XEN) ----[ Xen-4.15.0nb0 x86_64 debug=y Not tainted ]----
(XEN) CPU: 13
(XEN) RIP: e033:[<ffffffff80226e1a>]
(XEN) RFLAGS: 0000000000000202 EM: 1 CONTEXT: pv guest (d0v0)
(XEN) rax: 0000000000070106 rbx: 00000000013a1000 rcx: 0000000000000277
(XEN) rdx: 0000000000070106 rsi: deadbeefdeadf00d rdi: ffffffff80e29cc0
(XEN) rbp: ffffffff8139ff00 rsp: ffffffff8139fe70 r8: 0000000000000a58
(XEN) r9: ffffffff80fc3f80 r10: 0000000000000014 r11: ffffffff80e29d14
(XEN) r12: 0000000000000000 r13: 0000000000000000 r14: ffffffff8139b000
(XEN) r15: 0000000000000000 cr0: 0000000080050033 cr4: 0000000000042660
(XEN) cr3: 0000001031366000 cr2: 0000000000000000
(XEN) fsb: 0000000000000000 gsb: ffffffff80e29cc0 gss: 0000000000000000
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033
(XEN) Guest stack trace from rsp=ffffffff8139fe70:
(XEN) 0000000000000277 ffffffff80e29d14 0000000000000000 ffffffff80226e1a
(XEN) 000000010000e030 0000000000010002 ffffffff8139feb8 000000000000e02b
(XEN) ffffffff8139ff00 ffffffff80243c3e 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 00000000756e6547 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 ffffffff8023b0b1
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) 0000000000000000 0000000000000000
(XEN) Hardware Dom0 crashed: rebooting machine in 5 seconds.
Attachment:
smime.p7s
Description: S/MIME cryptographic signature