Port-xen archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kernel diagnostic assertion "psl == 0" failed
On September 12, 2018 10:47:04 PM GMT+08:00, SAITOH Masanobu <msaitoh%execsw.org@localhost> wrote:
>On 2018/09/12 23:31, Mathew, Cherry G. wrote:
>> On September 12, 2018 10:25:34 PM GMT+08:00, SAITOH Masanobu
><msaitoh%execsw.org@localhost> wrote:
>>> Hi.
>>>
>>> I got a panic on a dom0 while running ./build.sh on a domU's
>>> NetBSD-current:
>>>
>>>> [ 1293.1834301] panic: kernel diagnostic assertion "psl == 0"
>failed:
>>> file "../../../../arch/xen/x86/xen_intr.c", line 76
>>>> [ 1293.1834301] cpu0: Begin traceback...
>>>> [ 1293.1834301] vpanic() at netbsd:vpanic+0x152
>>>> [ 1293.1834301] kern_assert() at netbsd:kern_assert+0x48
>>>> [ 1293.1834301] spllower() at netbsd:spllower+0xbf
>>>> [ 1293.1834301] mutex_exit() at netbsd:mutex_exit+0x14e
>>>> [ 1293.1834301] evtchn_do_event() at netbsd:evtchn_do_event+0x362
>>>> [ 1293.1834301] do_hypervisor_callback() at
>>> netbsd:do_hypervisor_callback+0x196
>>>> [ 1293.1834301] hypervisor_callback() at
>>> netbsd:hypervisor_callback+0xb2
>>>> [ 1293.1834301] Xresume_xenev6() at netbsd:Xresume_xenev6+0x49
>>>> [ 1293.1834301] --- interrupt ---
>>>> [ 1293.1834301] Xspllower() at netbsd:Xspllower+0xe
>>>> [ 1293.1834301] trap() at netbsd:trap+0x819
>>>> [ 1293.1834301] --- trap (number 3) ---
>>>> [ 1293.1834301] 74450523e77a:
>>>> [ 1293.1834301] cpu0: End traceback...
>>>> [ 1293.1834301] Mutex error: mutex_vector_enter,525: assertion
>>> failed: !cpu_intr_p()
>>>>
>>>> [ 1293.1834301] lock address : 0xffffb1000740ef78 type :
>>> sleep/adaptive
>>>> [ 1293.1834301] initialized : 0xffffffff8081ef4e
>>>> [ 1293.1834301] shared holds : 0 exclusive:
>
>>> 0
>>>> [ 1293.1834301] shares wanted: 0 exclusive:
>
>>> 0
>>>> [ 1293.1834301] current cpu : 0 last held:
>
>>> 0
>>>> [ 1293.1834301] current lwp : 0xffffb1000a71c480 last held:
>>> 000000000000000000
>>>> [ 1293.1834301] last locked : 0xffffffff80835ef4 unlocked*:
>>> 0xffffffff80835f25
>>>> [ 1293.1834301] owner field : 000000000000000000 wait/spin:
>
>>> 0/0
>>>>
>>>> [ 1293.1834301] Turnstile chain at 0xffffffff80e296b0.
>>>> [ 1293.1834301] => No active turnstile for this lock.
>>>
>>> Is this known problem?
>>>
>>> Both dom0's kernel and domU's kernel are from yesterday's -current
>>> source.
>>
>> Hi - do you have a dmesg please to share? I'm trying to understand if
>this is related to my last two commits.
>>
>
>dom0:
>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
>2005,
>2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
>2018 The NetBSD Foundation, Inc. All rights reserved.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
>The Regents of the University of California. All rights reserved.
>
>NetBSD 8.99.25 (XEN3_DOM0) #91: Wed Sep 12 15:48:00 JST 2018
>msaitoh%amd64.execsw.org@localhost:/disk/sources/4NetBSD-current/src/sys/arch/amd64/compile/XEN3_DOM0
>total memory = 4096 MB
>avail memory = 3947 MB
>No module info at boot
>cpu_rng: RDSEED
>timecounter: Timecounters tick every 10.000 msec
>Kernelized RAIDframe activated
>running cgd selftest aes-xts-256 aes-xts-512 done
>SMBIOS rev. 3.0 @ 0x8d30d000 (42 entries)
>Supermicro C7Z270-CG (0123456789)
>mainbus0 (root)
>ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
>ACPI: XSDT 0x000000008C2400B0 0000E4 (v01 SUPERM SUPERM 01072009 AMI
>00010013)
>ACPI: FACP 0x000000008C268008 000114 (v06 01072009 AMI
>00010013)
>ACPI: DSDT 0x000000008C240230 027DD2 (v02 SUPERM SMCI--MB 01072009 INTL
>20160422)
>ACPI: FACS 0x000000008C947C40 000040
>ACPI: APIC 0x000000008C268120 000084 (v03 01072009 AMI
>00010013)
>ACPI: FPDT 0x000000008C2681A8 000044 (v01 01072009 AMI
>00010013)
>ACPI: MCFG 0x000000008C2681F0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT
>00000097)
>ACPI: SSDT 0x000000008C268230 000377 (v01 SataRe SataTabl 00001000 INTL
>20160422)
>ACPI: FIDT 0x000000008C2685A8 00009C (v01 SUPERM SMCI--MB 01072009 AMI
>00010013)
>ACPI: SSDT 0x000000008C268648 000877 (v02 Intel PerfTune 00001000 INTL
>20160422)
>ACPI: SSDT 0x000000008C268EC0 003154 (v02 SaSsdt SaSsdt 00003000 INTL
>20160422)
>ACPI: SSDT 0x000000008C26C018 002544 (v02 PegSsd PegSsdt 00001000 INTL
>20160422)
>ACPI: HPET 0x000000008C26E560 000038 (v01 INTEL KBL 00000001 MSFT
>0000005F)
>ACPI: SSDT 0x000000008C26E598 000024 (v02 INTEL OEM_RTD3 00001000 INTL
>20160422)
>ACPI: SSDT 0x000000008C26E5C0 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL
>20160422)
>ACPI: SSDT 0x000000008C26F3A8 000BB0 (v02 INTEL xh_rvp08 00000000 INTL
>20160422)
>ACPI: UEFI 0x000000008C26FF58 000042 (v01 INTEL EDK2 00000002
>01000013)
>ACPI: SSDT 0x000000008C26FFA0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL
>20160422)
>ACPI: LPIT 0x000000008C270E80 000094 (v01 INTEL KBL 00000000 MSFT
>0000005F)
>ACPI: WSMT 0x000000008C270F18 000028 (v01 INTEL KBL 00000000 MSFT
>0000005F)
>ACPI: SSDT 0x000000008C270F40 00029F (v02 INTEL sensrhub 00000000 INTL
>20160422)
>ACPI: SSDT 0x000000008C2711E0 003002 (v02 INTEL PtidDevc 00001000 INTL
>20160422)
>ACPI: DBGP 0x000000008C2741E8 000034 (v01 INTEL 00000002 MSFT
>0000005F)
>ACPI: DBG2 0x000000008C274220 000054 (v00 INTEL 00000002 MSFT
>0000005F)
>ACPI: RMAD 0x000000008C274278 0000A8 (v01 INTEL KBL 00000001 INTL
>00000001)
>ACPI: ASF! 0x000000008C274320 0000A0 (v32 INTEL HCG 00000001 TFSM
>000F4240)
>ACPI: 11 ACPI AML tables successfully acquired and loaded
>ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
>cpu0 at mainbus0 apid 0
>cpu1 at mainbus0 apid 2
>cpu2 at mainbus0 apid 4
>cpu3 at mainbus0 apid 6
>hypervisor0 at mainbus0: Xen version 4.8.3nb0
>hypervisor0: features: pae_pgdir_above_4gb mmu_pt_update_preserve_ad
>highmem_assist gnttab_map_avail_bits
>VIRQ_DEBUG interrupt using event channel 1
>vcpu0 at hypervisor0
>vcpu0: 16 page colors
>vcpu0: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
>vcpu0: package 0, core 0, smt 0
>xenbus0 at hypervisor0: Xen Virtual Bus Interface
>xencons0 at hypervisor0: Xen Virtual Console Driver
>xencons0: console major 143, unit 0
>xencons0: using event channel 2
>acpi0 at hypervisor0: Intel ACPICA 20180810
>acpi0: X/RSDT: OemId <SUPERM, SUPERM,01072009>, AslId <AMI ,00010013>
>acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=7
>acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid
>region
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=7
>acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid
>region
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=7
>acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid
>region
>acpi0: MCFG: PNP0C02: Type=4
>acpi0: MCFG: PNP0C02: Type=7
>acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid
>region
>acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32),
>Address=0x00000000fed10000, Length=0x0000000000008000
>acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32),
>Address=0x00000000fed18000, Length=0x0000000000001000
>acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32),
>Address=0x00000000fed19000, Length=0x0000000000001000
>acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32),
>Address=0x00000000e0000000, Length=0x0000000010000000
>acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
>acpi0: SCI interrupting at int 9
>acpi0: fixed power button present
>timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
>acpi0: ACPI-Safe 24-bit timer
>acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error:
>unable to evaluate _GPE: AE_NOT_FOUND
>SIO1 (PNP0C02) at acpi0 not configured
>UAR1 (PNP0501) at acpi0 not configured
>FWHD (INT0800) at acpi0 not configured
>HPET (PNP0103) at acpi0 not configured
>LDRC (PNP0C02) at acpi0 not configured
>LDR2 (PNP0C02) at acpi0 not configured
>TIMR (PNP0100) at acpi0 not configured
>CWDT (INT3F0D) at acpi0 not configured
>PDRC (PNP0C02) at acpi0 not configured
>IOTR (PNP0C02) at acpi0 not configured
>GPI0 (INT345D) at acpi0 not configured
>WMI1 (PNP0C14) at acpi0 not configured
>acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
>WTBT (PNP0C14) at acpi0 not configured
>PEPD (INT33A1) at acpi0 not configured
>acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
>PTMD (INT3394) at acpi0 not configured
>PTID (INT340E) at acpi0 not configured
>FAN0 (PNP0C0B) at acpi0 not configured
>FAN1 (PNP0C0B) at acpi0 not configured
>FAN2 (PNP0C0B) at acpi0 not configured
>FAN3 (PNP0C0B) at acpi0 not configured
>FAN4 (PNP0C0B) at acpi0 not configured
>acpitz0 at acpi0 (TZ00)
>acpitz0: polling interval 30.0 seconds
>acpitz0: active cooling level 0: 71.0C
>acpitz0: active cooling level 1: 55.0C
>acpitz0: active cooling level 2: 50.0C
>acpitz0: active cooling level 3: 45.0C
>acpitz0: active cooling level 4: 40.0C
>acpitz0: levels: critical 119.0 C
>acpitz1 at acpi0 (TZ01)
>acpitz1: polling interval 30.0 seconds
>acpitz1: levels: critical 119.0 C, passive cooling
>ACPI: Enabled 4 GPEs in block 00 to 7F
>
>acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0xffffffff,
>alias=false)
>acpi0: MCFG: 000:01:0: Ok (cfg[0x100]=0x14010002)
>acpi0: MCFG: 000:02:0: Ok (cfg[0x100]=0x2001001b)
>acpi0: MCFG: 000:08:0: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: 000:20:0: invalid config space (cfg[0x100]=0xa2af8086,
>alias=true)
>acpi0: MCFG: 000:20:2: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: 000:22:0: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: 000:23:0: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: 000:28:0: Ok (cfg[0x100]=0x14010001)
>acpi0: MCFG: 000:28:2: Ok (cfg[0x100]=0x14010001)
>acpi0: MCFG: 000:29:0: Ok (cfg[0x100]=0x14000000)
>acpi0: MCFG: 000:31:0: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: 000:31:2: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: 000:31:3: invalid config space (cfg[0x100]=0xffffffff,
>alias=false)
>acpi0: MCFG: 000:31:4: invalid config space (cfg[0x100]=0xa2a38086,
>alias=true)
>acpi0: MCFG: 000:31:6: invalid config space (cfg[0x100]=0x00000000,
>alias=false)
>acpi0: MCFG: bus 0: valid devices
>acpi0: MCFG: 000:01:0
>acpi0: MCFG: 000:02:0
>acpi0: MCFG: 000:28:0
>acpi0: MCFG: 000:28:2
>acpi0: MCFG: 000:29:0
>acpi0: acpimcfg_map_bus done
>pci0: i/o space, memory space enabled
>pchb0 at pci0 dev 0 function 0: vendor 8086 product 591f (rev. 0x05)
>ppb0 at pci0 dev 1 function 0: vendor 8086 product 1901 (rev. 0x05)
>ppb0: PCI Express capability version 2 <Root Port of PCI-E Root
>Complex> x16 @ 8.0GT/s
>ppb0: ioapic0 pin 16
>
>acpi0: MCFG: 001:00:0: Ok (cfg[0x100]=0x11010003)
>acpi0: MCFG: 001:00:1: Ok (cfg[0x100]=0x11010003)
>acpi0: MCFG: bus 1: valid devices
>acpi0: MCFG: 001:00:0
>acpi0: MCFG: 001:00:1
>acpi0: acpimcfg_map_bus done
>pci1: i/o space, memory space enabled
>bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
>bnx0: Ethernet address 00:10:18:5c:36:44
>bnx0: interrupting at ioapic0 pin 16
>bnx0: ASIC BCM5709 C0 (0x57092003)
>bnx0: PCIe x4 2.5Gbps
>bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
>brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
>brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>1000baseT-FDX, auto
>bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
>bnx1: Ethernet address 00:10:18:5c:36:46
>bnx1: interrupting at ioapic0 pin 17
>bnx1: ASIC BCM5709 C0 (0x57092003)
>bnx1: PCIe x4 2.5Gbps
>bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
>brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
>brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>1000baseT-FDX, auto
>vga0 at pci0 dev 2 function 0: vendor 8086 product 5912 (rev. 0x04)
>wsdisplay0 at vga0 kbdmux 1
>wsmux1: connecting to wsdisplay0
>drm at vga0 not configured
>vendor 8086 product 1911 (miscellaneous system) at pci0 dev 8 function
>0 not configured
>xhci0 at pci0 dev 20 function 0: vendor 8086 product a2af (rev. 0x00)
>xhci0: interrupting at ioapic0 pin 16
>xhci0: xHCI version 1.0
>xhci0: hcs1=1a000840 hcs2=14200054 hcs3=200000a
>xhci0: hcc=0x200077c1<XECP=0x2000,MAXPSA=0x7,SEC,SPC,PAE,NSS,LTC,AC64>
>xhci0: xECP 8000
>xhci0: ECR: 0x02000802
>xhci0: SP: 02000802 20425355 30111001 00000000
>xhci0: hs ports 1 - 16
>xhci0: ECR: 0x03001402
>xhci0: SP: 03001402 20425355 30000a11 00000000
>xhci0: ss ports 17 - 26
>xhci0: ECR: 0x004dffc0
>xhci0: ECR: 0x00002201
>xhci0: ECR: 0x000003c6
>xhci0: ECR: 0x002740c7
>xhci0: ECR: 0x000040c2
>xhci0: ECR: 0x0005100a
>xhci0: ECR: 0x000030c3
>xhci0: ECR: 0x000040c4
>xhci0: ECR: 0x000000c5
>xhci0: PAGESIZE 0x00000001
>xhci0: sc_pgsz 0x00001000
>xhci0: sc_maxslots 0x00000040
>xhci0: sc_maxports 26
>xhci0: sc_maxspbuf 34
>xhci0: eventst: 000000025e45efc0 0xffffa200d6da5fc0 1000
>xhci0: dcbaa: 000000025e45f000 0xffffa200d6da6000 1000
>xhci0: current IMOD 1000
>xhci0: USBCMD 00000005
>xhci0: USB3PRM / USB3.0 configurable ports: 0x00000100
>xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x000000c0
>xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x00000006
>xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x00000018
>usb0 at xhci0: USB revision 3.0
>usb0: WARNING: power management not supported
>usb1 at xhci0: USB revision 2.0
>usb1: WARNING: power management not supported
>vendor 8086 product a2b1 (miscellaneous DASP) at pci0 dev 20 function 2
>not configured
>vendor 8086 product a2ba (miscellaneous communications) at pci0 dev 22
>function 0 not configured
>: vendor 8086 product a282 (rev. 0x00)
>ahcisata0: interrupting at ioapic0 pin 16
>ahcisata0: 64-bit DMA
>ahcisata0: AHCI revision 1.31, 6 ports, 32 slots, CAP
>0xe334ff45<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SSNTF,SNCQ,S64A>
>atabus0 at ahcisata0 channel 0
>atabus1 at ahcisata0 channel 1
>atabus2 at ahcisata0 channel 2
>atabus3 at ahcisata0 channel 3
>atabus4 at ahcisata0 channel 4
>atabus5 at ahcisata0 channel 5
>ppb1 at pci0 dev 28 function 0: vendor 8086 product a290 (rev. 0xf0)
>ppb1: PCI Express capability version 2 <Root Port of PCI-E Root
>Complex> x2 @ 8.0GT/s
>ppb1: link is x2 @ 5.0GT/s
>ppb1: ioapic0 pin 16
>
>acpi0: MCFG: 002:00:0: Ok (cfg[0x100]=0x20010002)
>acpi0: MCFG: bus 2: valid devices
>acpi0: MCFG: 002:00:0
>acpi0: acpimcfg_map_bus done
>pci2: i/o space, memory space enabled
>xhci1 at pci2 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
>xhci1: interrupting at ioapic0 pin 16
>xhci1: xHCI version 1.10
>xhci1: hcs1=4000840 hcs2=840000fa hcs3=200000a
>xhci1: hcc=0x200eec1<XECP=0x200,MAXPSA=0xe,CFC,SEC,SPC,NSS,LTC,AC64>
>xhci1: xECP 800
>xhci1: hcc2=0x3f<CIC,LEC,CTC,FSC,CMC,U3C>
>xhci1: ECR: 0x00000401
>xhci1: ECR: 0x03010802
>xhci1: SP: 03010802 20425355 00000201 00000000
>xhci1: ss ports 1 - 2
>xhci1: ECR: 0x02000802
>xhci1: SP: 02000802 20425355 00190203 00000000
>xhci1: hs ports 3 - 4
>xhci1: ECR: 0x0000000a
>xhci1: PAGESIZE 0x00000001
>xhci1: sc_pgsz 0x00001000
>xhci1: sc_maxslots 0x00000040
>xhci1: sc_maxports 4
>xhci1: sc_maxspbuf 16
>xhci1: eventst: 000000025e45ef80 0xffffa200d6da5f80 1000
>xhci1: dcbaa: 000000025e48d000 0xffffa200d6e06000 1000
>xhci1: current IMOD 0
>xhci1: USBCMD 00000005
>usb2 at xhci1: USB revision 3.0
>usb2: WARNING: power management not supported
>usb3 at xhci1: USB revision 2.0
>usb3: WARNING: power management not supported
>ppb2 at pci0 dev 28 function 2: vendor 8086 product a292 (rev. 0xf0)
>ppb2: PCI Express capability version 2 <Root Port of PCI-E Root
>Complex> x2 @ 8.0GT/s
>ppb2: link is x2 @ 5.0GT/s
>ppb2: ioapic0 pin 18
>
>acpi0: MCFG: 003:00:0: Ok (cfg[0x100]=0x20010002)
>acpi0: MCFG: bus 3: valid devices
>acpi0: MCFG: 003:00:0
>acpi0: acpimcfg_map_bus done
>pci3: i/o space, memory space enabled
>xhci2 at pci3 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
>xhci2: interrupting at ioapic0 pin 18
>xhci2: xHCI version 1.10
>xhci2: hcs1=4000840 hcs2=840000fa hcs3=200000a
>xhci2: hcc=0x200eec1<XECP=0x200,MAXPSA=0xe,CFC,SEC,SPC,NSS,LTC,AC64>
>xhci2: xECP 800
>xhci2: hcc2=0x3f<CIC,LEC,CTC,FSC,CMC,U3C>
>xhci2: ECR: 0x00000401
>xhci2: ECR: 0x03010802
>xhci2: SP: 03010802 20425355 00000201 00000000
>xhci2: ss ports 1 - 2
>xhci2: ECR: 0x02000802
>xhci2: SP: 02000802 20425355 00190203 00000000
>xhci2: hs ports 3 - 4
>xhci2: ECR: 0x0000000a
>xhci2: PAGESIZE 0x00000001
>xhci2: sc_pgsz 0x00001000
>xhci2: sc_maxslots 0x00000040
>xhci2: sc_maxports 4
>xhci2: sc_maxspbuf 16
>xhci2: eventst: 000000025e45ef40 0xffffa200d6da5f40 1000
>xhci2: dcbaa: 000000025e4a1000 0xffffa200d6e23000 1000
>xhci2: current IMOD 0
>xhci2: USBCMD 00000005
>usb4 at xhci2: USB revision 3.0
>usb4: WARNING: power management not supported
>usb5 at xhci2: USB revision 2.0
>usb5: WARNING: power management not supported
>ppb3 at pci0 dev 29 function 0: vendor 8086 product a298 (rev. 0xf0)
>ppb3: PCI Express capability version 2 <Root Port of PCI-E Root
>Complex> x4 @ 8.0GT/s
>ppb3: ioapic0 pin 16
>
>acpi0: MCFG: 004:00:0: Ok (cfg[0x100]=0x15010001)
>acpi0: MCFG: bus 4: valid devices
>acpi0: MCFG: 004:00:0
>acpi0: acpimcfg_map_bus done
>pci4: i/o space, memory space enabled
>nvme0 at pci4 dev 0 function 0: vendor 8086 product 0a53 (rev. 0x02)
>nvme0: NVMe 1.0
>nvme0: interrupting at ioapic0 pin 16
>nvme0: INTEL SSDPE2MX450G7, firmware MDV10253, serial
>CVPF6345003M450RGN
>ld0 at nvme0 nsid 1
>ld0: 419 GB, 54721 cyl, 255 head, 63 sec, 512 bytes/sect x 879097968
>sectors
>pcib0 at pci0 dev 31 function 0: vendor 8086 product a2c5 (rev. 0x00)
>vendor 8086 product a2a1 (miscellaneous memory) at pci0 dev 31 function
>2 not configured
>hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
>hdaudio0: interrupting at ioapic0 pin 16
>hdafg0 at hdaudio0 vendor 0x10EC product 0x0900 nid 0x01: vendor 10ec
>product 0900
>hdafg0: DAC00 6ch: Speaker [Jack]
>nid=14 [pin: Speaker (Green Jack)]
>nid=0C [audio mixer] [source: dac, record]
>nid=02 [audio output] [source: dac]
>nid=0B [audio mixer] [source: record]
>nid=16 [pin: Speaker (Orange Jack)]
>nid=0E [audio mixer] [source: dac, record]
>nid=04 [audio output] [source: dac]
>nid=0B [audio mixer] [source: record]
>nid=15 [pin: Speaker (Black Jack)]
>nid=0D [audio mixer] [source: dac, record]
>nid=03 [audio output] [source: dac]
>nid=0B [audio mixer] [source: record]
>hdafg0: DAC01 2ch: HP Out [Jack]
>nid=1B [pin: HP Out (Green Jack)]
>nid=0F [audio mixer] [source: dac, record]
>nid=05 [audio output] [source: dac]
>nid=0B [audio mixer] [source: record]
>hdafg0: DIG02 2ch: SPDIF Out [Built-In]
>nid=11 [pin: SPDIF Out (Built-In)]
>nid=10 [audio output] [source: dac]
>hdafg0: DIG03 2ch: SPDIF Out [Jack]
>nid=1E [pin: SPDIF Out (Grey Jack)]
>nid=06 [audio output] [source: dac]
>hdafg0: ADC04 2ch: Line In [Jack], Mic In [Jack]
>nid=18 [pin: Mic In (Pink Jack)]
>nid=19 [pin: Mic In (Pink Jack)]
>nid=1A [pin: Line In (Blue Jack)]
>hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16
>PCM20 PCM24 AC3
>audio0 at hdafg0: full duplex, playback, capture, mmap, independent
>hdafg0: Virtual format configured - Format SLINEAR, precision 16,
>channels 2, frequency 48000
>hdafg0: Latency: 128 milliseconds
>spkr0 at audio0: PC Speaker (synthesized)
>wsbell at spkr0 not configured
>hdafg1 at hdaudio0 vendor 0x8086 product 0x280B nid 0x01: vendor 8086
>product 280b
>hdafg1: DP00 8ch: Digital Out [Jack]
>nid=03 [pin: Digital Out (Jack)]
>nid=02 [audio output] [source: dac]
>hdafg1: 8ch/0ch 48000Hz PCM16*
>ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a2a3 (rev. 0x00)
>ichsmb0: interrupting at ioapic0 pin 16
>iic0 at ichsmb0: I2C bus
>wm0 at pci0 dev 31 function 6: I219 LM Ethernet Connection (rev. 0x00)
>wm0: interrupting at ioapic0 pin 16
>wm0: PCI-Express bus
>wm0: Ethernet address 00:e0:dd:cc:bb:aa
>wm0: 0xa4080<FLASH,PCIE,ASF_FIRM,AMT>
>ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
>ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>1000baseT-FDX, auto
>isa0 at pcib0
>pckbc0 at isa0 port 0x60-0x64
>pckbdprobe: reset error 5
>pmsprobe: reset error 5
>wbsio_probe: id 0xc9, rev 0x13
>wbsio0 at isa0 port 0x4e-0x4f: Nuvoton LPC Super I/O NCT6792D rev D
>lm0 at wbsio0 port 0xa30-0xa37
>lm0: Using default temp sensors
>lm0: Nuvoton NCT6792D Hardware monitor
>lm0: WARNING: power management not supported
>Initializing SSP: dbd2ec04f635c1ec b0a3560015abfdfd 4e3f75e2d2c0ecf7
>5ca1f4c2ae9ba8a6 6fa9c354de0beeb5 a18ca335aa623e21 ea22092f26f6fa0e
>2429bc098b055ed7
>timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
>timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz
>quality 10000
>Xen vcpu0 clock: using event channel 7
>xenbus0: using event channel 8
>uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
>3.00/1.00, addr 0
>uhub0: 10 ports with 10 removable, self powered
>uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
>2.00/1.00, addr 0
>uhub1: 16 ports with 16 removable, self powered
>uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
>3.00/1.00, addr 0
>uhub2: 2 ports with 2 removable, self powered
>uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
>2.00/1.00, addr 0
>uhub3: 2 ports with 2 removable, self powered
>uhub4 at usb4: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
>3.00/1.00, addr 0
>uhub4: 2 ports with 2 removable, self powered
>uhub5 at usb5: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
>2.00/1.00, addr 0
>uhub5: 2 ports with 2 removable, self powered
>IPsec: Initialized Security Association Processing.
>ahcisata0 port 0: device present, speed: 6.0Gb/s
>ahcisata0 port 1: PHY offline
>ahcisata0 port 2: PHY offline
>ahcisata0 port 3: PHY offline
>ahcisata0 port 4: PHY offline
>ahcisata0 port 5: PHY offline
>wd0 at atabus0 drive 0
>wd0: <PLEXTOR PX-128M5S>
>wd0: drive supports 16-sector PIO transfers, LBA48 addressing
>wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680
>sectors
>wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6
>(Ultra/133), NCQ (32 tags)
>wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
>(Ultra/133) (using DMA), NCQ (31 tags)
>uhidev0 at uhub3 port 1 configuration 1 interface 0
>uhidev0: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr
>1, iclass 3/1
>ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
>wskbd0 at ukbd0 mux 1
>wskbd0: connecting to wsdisplay0
>uhidev1 at uhub3 port 1 configuration 1 interface 1
>uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr
>1, iclass 3/1
>uhidev1: 2 report ids
>uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
>uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
>crypto: assign driver 0, flags 2
>crypto: driver 0 registers alg 1 flags 0 maxoplen 0
>crypto: driver 0 registers alg 2 flags 0 maxoplen 0
>crypto: driver 0 registers alg 3 flags 0 maxoplen 0
>crypto: driver 0 registers alg 4 flags 0 maxoplen 0
>crypto: driver 0 registers alg 5 flags 0 maxoplen 0
>crypto: driver 0 registers alg 26 flags 0 maxoplen 0
>crypto: driver 0 registers alg 27 flags 0 maxoplen 0
>crypto: driver 0 registers alg 29 flags 0 maxoplen 0
>crypto: driver 0 registers alg 33 flags 0 maxoplen 0
>crypto: driver 0 registers alg 17 flags 0 maxoplen 0
>crypto: driver 0 registers alg 6 flags 0 maxoplen 0
>crypto: driver 0 registers alg 19 flags 0 maxoplen 0
>crypto: driver 0 registers alg 7 flags 0 maxoplen 0
>crypto: driver 0 registers alg 20 flags 0 maxoplen 0
>crypto: driver 0 registers alg 15 flags 0 maxoplen 0
>crypto: driver 0 registers alg 24 flags 0 maxoplen 0
>crypto: driver 0 registers alg 25 flags 0 maxoplen 0
>crypto: driver 0 registers alg 8 flags 0 maxoplen 0
>crypto: driver 0 registers alg 21 flags 0 maxoplen 0
>crypto: driver 0 registers alg 16 flags 0 maxoplen 0
>crypto: driver 0 registers alg 9 flags 0 maxoplen 0
>crypto: driver 0 registers alg 10 flags 0 maxoplen 0
>crypto: driver 0 registers alg 13 flags 0 maxoplen 0
>crypto: driver 0 registers alg 14 flags 0 maxoplen 0
>crypto: driver 0 registers alg 28 flags 0 maxoplen 0
>crypto: driver 0 registers alg 30 flags 0 maxoplen 0
>crypto: driver 0 registers alg 31 flags 0 maxoplen 0
>crypto: driver 0 registers alg 32 flags 0 maxoplen 0
>crypto: driver 0 registers alg 11 flags 0 maxoplen 0
>crypto: driver 0 registers alg 18 flags 0 maxoplen 0
>crypto: driver 0 registers alg 23 flags 0 maxoplen 0
>crypto: driver 0 registers alg 22 flags 0 maxoplen 0
>Searching for RAID components...
>WARNING: 70 errors while detecting hardware; check system log.
>boot device: wd0
>root on wd0a dumps on wd0b
>Your machine does not initialize mem_clusters; sparse_dumps disabled
>/: replaying log to memory
>root file system type: ffs
>kern.module.path=/stand/amd64-xen/8.99.25/modules
>/: replaying log to disk
>TXDCTL = 01410000
>RXDCTL(0) = 01010000
>XXX: pause_time = 0000
>wsdisplay0: screen 1 added (80x25, vt100 emulation)
>wsdisplay0: screen 2 added (80x25, vt100 emulation)
>wsdisplay0: screen 3 added (80x25, vt100 emulation)
>wsdisplay0: screen 4 added (80x25, vt100 emulation)
>nfs server 192.168.1.2:/disk/home: not responding
>nfs server 192.168.1.2:/disk/home: is alive again
>nfs server 192.168.1.2:/disk/sources: not responding
>nfs server 192.168.1.2:/disk/sources: is alive again
>balloon0 at xenbus0 id 0: Xen Balloon driver
>balloon0: current reservation: 4194304 KiB
>xbd backend: attach device vnd0d (size 67108864) for domain 1
>xvif1i0: Ethernet address 00:16:3e:01:00:15
>xbd backend domain 1 handle 0x3 (3) using event channel 13, protocol
>x86_64-abi
>
>
>domU:
>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
>2005,
>2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
>2018 The NetBSD Foundation, Inc. All rights reserved.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
>The Regents of the University of California. All rights reserved.
>
>NetBSD 8.99.25 (XEN3_DOMU) #10: Wed Sep 12 17:27:52 JST 2018
>msaitoh%amd64.execsw.org@localhost:/disk/sources/4NetBSD-current/src/sys/arch/amd64/compile/XEN3_DOMU
>total memory = 3072 MB
>avail memory = 2964 MB
>cpu_rng: RDSEED
>timecounter: Timecounters tick every 10.000 msec
>Kernelized RAIDframe activated
>running cgd selftest aes-xts-256 aes-xts-512 done
>mainbus0 (root)
>hypervisor0 at mainbus0: Xen version 4.8.3nb0
>hypervisor0: features: mmu_pt_update_preserve_ad highmem_assist
>gnttab_map_avail_bits
>VIRQ_DEBUG interrupt using event channel 3
>vcpu0 at hypervisor0
>vcpu0: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
>vcpu0: package 0, core 0, smt 0
>vcpu1 at hypervisor0
>vcpu1: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
>vcpu1: package 0, core 0, smt 0
>vcpu2 at hypervisor0
>vcpu2: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
>vcpu2: package 0, core 0, smt 0
>vcpu3 at hypervisor0
>vcpu3: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
>vcpu3: package 0, core 0, smt 0
>xenbus0 at hypervisor0: Xen Virtual Bus Interface
>xencons0 at hypervisor0: Xen Virtual Console Driver
>xencons0: console major 143, unit 0
>xencons0: using event channel 2
>timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
>timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz
>quality 10000
>Xen vcpu0 clock: using event channel 5
>Xen vcpu1 clock: using event channel 7
>Xen vcpu2 clock: using event channel 9
>Xen vcpu3 clock: using event channel 11
>xenbus0: using event channel 1
>IPsec: Initialized Security Association Processing.
>xenbus: can't get state for device/suspend/event-channel (2)
>xbd0 at xenbus0 id 3: Xen Virtual Block Device Interface
>xbd0: using event channel 12
>xennet0 at xenbus0 id 0: Xen Virtual Network Interface
>xennet0: MAC address 00:16:3e:00:00:15
>xennet0: using event channel 13
>balloon0 at xenbus0 id 0: Xen Balloon driver
>balloon0: current reservation: 3145728 KiB
>xbd0: 32768 MB, 512 bytes/sect x 67108864 sectors
>xennet0: using RX copy mode
>boot device: xbd0
>root on xbd0a dumps on xbd0b
>Your machine does not initialize mem_clusters; sparse_dumps disabled
>/: replaying log to memory
>root file system type: ffs
>kern.module.path=/stand/amd64-xen/8.99.25/modules
>xenbus: can't get state for device/suspend/event-channel (2)
>balloon0: current reservation: 786432 pages => target: 786432 pages
>ignore shutdown request:
>xenbus: can't get state for device/suspend/event-channel (2)
>/: replaying log to disk
I notice that the dmesg contains no, legacy' irqs(except for the ACPI SCI irq 9).
Is this expected?
Cherry
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Home |
Main Index |
Thread Index |
Old Index