Port-xen archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kernel diagnostic assertion "psl == 0" failed
On 2018/09/12 23:47, SAITOH Masanobu wrote:
> On 2018/09/12 23:31, Mathew, Cherry G. wrote:
>> On September 12, 2018 10:25:34 PM GMT+08:00, SAITOH Masanobu <msaitoh%execsw.org@localhost> wrote:
>>> Hi.
>>>
>>> I got a panic on a dom0 while running ./build.sh on a domU's
>>> NetBSD-current:
>>>
>>>> [ 1293.1834301] panic: kernel diagnostic assertion "psl == 0" failed:
>>> file "../../../../arch/xen/x86/xen_intr.c", line 76
>>>> [ 1293.1834301] cpu0: Begin traceback...
>>>> [ 1293.1834301] vpanic() at netbsd:vpanic+0x152
>>>> [ 1293.1834301] kern_assert() at netbsd:kern_assert+0x48
>>>> [ 1293.1834301] spllower() at netbsd:spllower+0xbf
>>>> [ 1293.1834301] mutex_exit() at netbsd:mutex_exit+0x14e
>>>> [ 1293.1834301] evtchn_do_event() at netbsd:evtchn_do_event+0x362
>>>> [ 1293.1834301] do_hypervisor_callback() at
>>> netbsd:do_hypervisor_callback+0x196
>>>> [ 1293.1834301] hypervisor_callback() at
>>> netbsd:hypervisor_callback+0xb2
>>>> [ 1293.1834301] Xresume_xenev6() at netbsd:Xresume_xenev6+0x49
>>>> [ 1293.1834301] --- interrupt ---
>>>> [ 1293.1834301] Xspllower() at netbsd:Xspllower+0xe
>>>> [ 1293.1834301] trap() at netbsd:trap+0x819
>>>> [ 1293.1834301] --- trap (number 3) ---
>>>> [ 1293.1834301] 74450523e77a:
>>>> [ 1293.1834301] cpu0: End traceback...
>>>> [ 1293.1834301] Mutex error: mutex_vector_enter,525: assertion
>>> failed: !cpu_intr_p()
>>>>
>>>> [ 1293.1834301] lock address : 0xffffb1000740ef78 type :
>>> sleep/adaptive
>>>> [ 1293.1834301] initialized : 0xffffffff8081ef4e
>>>> [ 1293.1834301] shared holds : 0 exclusive:
>>> 0
>>>> [ 1293.1834301] shares wanted: 0 exclusive:
>>> 0
>>>> [ 1293.1834301] current cpu : 0 last held:
>>> 0
>>>> [ 1293.1834301] current lwp : 0xffffb1000a71c480 last held:
>>> 000000000000000000
>>>> [ 1293.1834301] last locked : 0xffffffff80835ef4 unlocked*:
>>> 0xffffffff80835f25
>>>> [ 1293.1834301] owner field : 000000000000000000 wait/spin:
>>> 0/0
>>>>
>>>> [ 1293.1834301] Turnstile chain at 0xffffffff80e296b0.
>>>> [ 1293.1834301] => No active turnstile for this lock.
>>>
>>> Is this known problem?
>>>
>>> Both dom0's kernel and domU's kernel are from yesterday's -current
>>> source.
>>
>> Hi - do you have a dmesg please to share? I'm trying to understand if this is related to my last two commits.
>>
>
> dom0:
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
> 2018 The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 8.99.25 (XEN3_DOM0) #91: Wed Sep 12 15:48:00 JST 2018
> msaitoh%amd64.execsw.org@localhost:/disk/sources/4NetBSD-current/src/sys/arch/amd64/compile/XEN3_DOM0
> total memory = 4096 MB
> avail memory = 3947 MB
> No module info at boot
> cpu_rng: RDSEED
> timecounter: Timecounters tick every 10.000 msec
> Kernelized RAIDframe activated
> running cgd selftest aes-xts-256 aes-xts-512 done
> SMBIOS rev. 3.0 @ 0x8d30d000 (42 entries)
> Supermicro C7Z270-CG (0123456789)
> mainbus0 (root)
> ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
> ACPI: XSDT 0x000000008C2400B0 0000E4 (v01 SUPERM SUPERM 01072009 AMI 00010013)
> ACPI: FACP 0x000000008C268008 000114 (v06 01072009 AMI 00010013)
> ACPI: DSDT 0x000000008C240230 027DD2 (v02 SUPERM SMCI--MB 01072009 INTL 20160422)
> ACPI: FACS 0x000000008C947C40 000040
> ACPI: APIC 0x000000008C268120 000084 (v03 01072009 AMI 00010013)
> ACPI: FPDT 0x000000008C2681A8 000044 (v01 01072009 AMI 00010013)
> ACPI: MCFG 0x000000008C2681F0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
> ACPI: SSDT 0x000000008C268230 000377 (v01 SataRe SataTabl 00001000 INTL 20160422)
> ACPI: FIDT 0x000000008C2685A8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
> ACPI: SSDT 0x000000008C268648 000877 (v02 Intel PerfTune 00001000 INTL 20160422)
> ACPI: SSDT 0x000000008C268EC0 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
> ACPI: SSDT 0x000000008C26C018 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
> ACPI: HPET 0x000000008C26E560 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
> ACPI: SSDT 0x000000008C26E598 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
> ACPI: SSDT 0x000000008C26E5C0 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
> ACPI: SSDT 0x000000008C26F3A8 000BB0 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
> ACPI: UEFI 0x000000008C26FF58 000042 (v01 INTEL EDK2 00000002 01000013)
> ACPI: SSDT 0x000000008C26FFA0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
> ACPI: LPIT 0x000000008C270E80 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
> ACPI: WSMT 0x000000008C270F18 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
> ACPI: SSDT 0x000000008C270F40 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
> ACPI: SSDT 0x000000008C2711E0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
> ACPI: DBGP 0x000000008C2741E8 000034 (v01 INTEL 00000002 MSFT 0000005F)
> ACPI: DBG2 0x000000008C274220 000054 (v00 INTEL 00000002 MSFT 0000005F)
> ACPI: RMAD 0x000000008C274278 0000A8 (v01 INTEL KBL 00000001 INTL 00000001)
> ACPI: ASF! 0x000000008C274320 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
> ACPI: 11 ACPI AML tables successfully acquired and loaded
> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
> cpu0 at mainbus0 apid 0
> cpu1 at mainbus0 apid 2
> cpu2 at mainbus0 apid 4
> cpu3 at mainbus0 apid 6
> hypervisor0 at mainbus0: Xen version 4.8.3nb0
> hypervisor0: features: pae_pgdir_above_4gb mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
> VIRQ_DEBUG interrupt using event channel 1
> vcpu0 at hypervisor0
> vcpu0: 16 page colors
> vcpu0: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
> vcpu0: package 0, core 0, smt 0
> xenbus0 at hypervisor0: Xen Virtual Bus Interface
> xencons0 at hypervisor0: Xen Virtual Console Driver
> xencons0: console major 143, unit 0
> xencons0: using event channel 2
> acpi0 at hypervisor0: Intel ACPICA 20180810
> acpi0: X/RSDT: OemId <SUPERM, SUPERM,01072009>, AslId <AMI ,00010013>
> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=7
> acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=7
> acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=7
> acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
> acpi0: MCFG: PNP0C02: Type=4
> acpi0: MCFG: PNP0C02: Type=7
> acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
> acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000fed10000, Length=0x0000000000008000
> acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000fed18000, Length=0x0000000000001000
> acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000fed19000, Length=0x0000000000001000
> acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000e0000000, Length=0x0000000010000000
> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
> acpi0: SCI interrupting at int 9
> acpi0: fixed power button present
> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
> acpi0: ACPI-Safe 24-bit timer
> acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND
> SIO1 (PNP0C02) at acpi0 not configured
> UAR1 (PNP0501) at acpi0 not configured
> FWHD (INT0800) at acpi0 not configured
> HPET (PNP0103) at acpi0 not configured
> LDRC (PNP0C02) at acpi0 not configured
> LDR2 (PNP0C02) at acpi0 not configured
> TIMR (PNP0100) at acpi0 not configured
> CWDT (INT3F0D) at acpi0 not configured
> PDRC (PNP0C02) at acpi0 not configured
> IOTR (PNP0C02) at acpi0 not configured
> GPI0 (INT345D) at acpi0 not configured
> WMI1 (PNP0C14) at acpi0 not configured
> acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> WTBT (PNP0C14) at acpi0 not configured
> PEPD (INT33A1) at acpi0 not configured
> acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
> PTMD (INT3394) at acpi0 not configured
> PTID (INT340E) at acpi0 not configured
> FAN0 (PNP0C0B) at acpi0 not configured
> FAN1 (PNP0C0B) at acpi0 not configured
> FAN2 (PNP0C0B) at acpi0 not configured
> FAN3 (PNP0C0B) at acpi0 not configured
> FAN4 (PNP0C0B) at acpi0 not configured
> acpitz0 at acpi0 (TZ00)
> acpitz0: polling interval 30.0 seconds
> acpitz0: active cooling level 0: 71.0C
> acpitz0: active cooling level 1: 55.0C
> acpitz0: active cooling level 2: 50.0C
> acpitz0: active cooling level 3: 45.0C
> acpitz0: active cooling level 4: 40.0C
> acpitz0: levels: critical 119.0 C
> acpitz1 at acpi0 (TZ01)
> acpitz1: polling interval 30.0 seconds
> acpitz1: levels: critical 119.0 C, passive cooling
> ACPI: Enabled 4 GPEs in block 00 to 7F
>
> acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
> acpi0: MCFG: 000:01:0: Ok (cfg[0x100]=0x14010002)
> acpi0: MCFG: 000:02:0: Ok (cfg[0x100]=0x2001001b)
> acpi0: MCFG: 000:08:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: 000:20:0: invalid config space (cfg[0x100]=0xa2af8086, alias=true)
> acpi0: MCFG: 000:20:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: 000:22:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: 000:23:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: 000:28:0: Ok (cfg[0x100]=0x14010001)
> acpi0: MCFG: 000:28:2: Ok (cfg[0x100]=0x14010001)
> acpi0: MCFG: 000:29:0: Ok (cfg[0x100]=0x14000000)
> acpi0: MCFG: 000:31:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: 000:31:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: 000:31:3: invalid config space (cfg[0x100]=0xffffffff, alias=false)
> acpi0: MCFG: 000:31:4: invalid config space (cfg[0x100]=0xa2a38086, alias=true)
> acpi0: MCFG: 000:31:6: invalid config space (cfg[0x100]=0x00000000, alias=false)
> acpi0: MCFG: bus 0: valid devices
> acpi0: MCFG: 000:01:0
> acpi0: MCFG: 000:02:0
> acpi0: MCFG: 000:28:0
> acpi0: MCFG: 000:28:2
> acpi0: MCFG: 000:29:0
> acpi0: acpimcfg_map_bus done
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 0 function 0: vendor 8086 product 591f (rev. 0x05)
> ppb0 at pci0 dev 1 function 0: vendor 8086 product 1901 (rev. 0x05)
> ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
> ppb0: ioapic0 pin 16
>
> acpi0: MCFG: 001:00:0: Ok (cfg[0x100]=0x11010003)
> acpi0: MCFG: 001:00:1: Ok (cfg[0x100]=0x11010003)
> acpi0: MCFG: bus 1: valid devices
> acpi0: MCFG: 001:00:0
> acpi0: MCFG: 001:00:1
> acpi0: acpimcfg_map_bus done
> pci1: i/o space, memory space enabled
> bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
> bnx0: Ethernet address 00:10:18:5c:36:44
> bnx0: interrupting at ioapic0 pin 16
> bnx0: ASIC BCM5709 C0 (0x57092003)
> bnx0: PCIe x4 2.5Gbps
> bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
> bnx1: Ethernet address 00:10:18:5c:36:46
> bnx1: interrupting at ioapic0 pin 17
> bnx1: ASIC BCM5709 C0 (0x57092003)
> bnx1: PCIe x4 2.5Gbps
> bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> vga0 at pci0 dev 2 function 0: vendor 8086 product 5912 (rev. 0x04)
> wsdisplay0 at vga0 kbdmux 1
> wsmux1: connecting to wsdisplay0
> drm at vga0 not configured
> vendor 8086 product 1911 (miscellaneous system) at pci0 dev 8 function 0 not configured
> xhci0 at pci0 dev 20 function 0: vendor 8086 product a2af (rev. 0x00)
> xhci0: interrupting at ioapic0 pin 16
> xhci0: xHCI version 1.0
> xhci0: hcs1=1a000840 hcs2=14200054 hcs3=200000a
> xhci0: hcc=0x200077c1<XECP=0x2000,MAXPSA=0x7,SEC,SPC,PAE,NSS,LTC,AC64>
> xhci0: xECP 8000
> xhci0: ECR: 0x02000802
> xhci0: SP: 02000802 20425355 30111001 00000000
> xhci0: hs ports 1 - 16
> xhci0: ECR: 0x03001402
> xhci0: SP: 03001402 20425355 30000a11 00000000
> xhci0: ss ports 17 - 26
> xhci0: ECR: 0x004dffc0
> xhci0: ECR: 0x00002201
> xhci0: ECR: 0x000003c6
> xhci0: ECR: 0x002740c7
> xhci0: ECR: 0x000040c2
> xhci0: ECR: 0x0005100a
> xhci0: ECR: 0x000030c3
> xhci0: ECR: 0x000040c4
> xhci0: ECR: 0x000000c5
> xhci0: PAGESIZE 0x00000001
> xhci0: sc_pgsz 0x00001000
> xhci0: sc_maxslots 0x00000040
> xhci0: sc_maxports 26
> xhci0: sc_maxspbuf 34
> xhci0: eventst: 000000025e45efc0 0xffffa200d6da5fc0 1000
> xhci0: dcbaa: 000000025e45f000 0xffffa200d6da6000 1000
> xhci0: current IMOD 1000
> xhci0: USBCMD 00000005
> xhci0: USB3PRM / USB3.0 configurable ports: 0x00000100
> xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x000000c0
> xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x00000006
> xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x00000018
> usb0 at xhci0: USB revision 3.0
> usb0: WARNING: power management not supported
> usb1 at xhci0: USB revision 2.0
> usb1: WARNING: power management not supported
> vendor 8086 product a2b1 (miscellaneous DASP) at pci0 dev 20 function 2 not configured
> vendor 8086 product a2ba (miscellaneous communications) at pci0 dev 22 function 0 not configured
> : vendor 8086 product a282 (rev. 0x00)
> ahcisata0: interrupting at ioapic0 pin 16
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.31, 6 ports, 32 slots, CAP 0xe334ff45<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SSNTF,SNCQ,S64A>
> atabus0 at ahcisata0 channel 0
> atabus1 at ahcisata0 channel 1
> atabus2 at ahcisata0 channel 2
> atabus3 at ahcisata0 channel 3
> atabus4 at ahcisata0 channel 4
> atabus5 at ahcisata0 channel 5
> ppb1 at pci0 dev 28 function 0: vendor 8086 product a290 (rev. 0xf0)
> ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
> ppb1: link is x2 @ 5.0GT/s
> ppb1: ioapic0 pin 16
>
> acpi0: MCFG: 002:00:0: Ok (cfg[0x100]=0x20010002)
> acpi0: MCFG: bus 2: valid devices
> acpi0: MCFG: 002:00:0
> acpi0: acpimcfg_map_bus done
> pci2: i/o space, memory space enabled
> xhci1 at pci2 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
> xhci1: interrupting at ioapic0 pin 16
> xhci1: xHCI version 1.10
> xhci1: hcs1=4000840 hcs2=840000fa hcs3=200000a
> xhci1: hcc=0x200eec1<XECP=0x200,MAXPSA=0xe,CFC,SEC,SPC,NSS,LTC,AC64>
> xhci1: xECP 800
> xhci1: hcc2=0x3f<CIC,LEC,CTC,FSC,CMC,U3C>
> xhci1: ECR: 0x00000401
> xhci1: ECR: 0x03010802
> xhci1: SP: 03010802 20425355 00000201 00000000
> xhci1: ss ports 1 - 2
> xhci1: ECR: 0x02000802
> xhci1: SP: 02000802 20425355 00190203 00000000
> xhci1: hs ports 3 - 4
> xhci1: ECR: 0x0000000a
> xhci1: PAGESIZE 0x00000001
> xhci1: sc_pgsz 0x00001000
> xhci1: sc_maxslots 0x00000040
> xhci1: sc_maxports 4
> xhci1: sc_maxspbuf 16
> xhci1: eventst: 000000025e45ef80 0xffffa200d6da5f80 1000
> xhci1: dcbaa: 000000025e48d000 0xffffa200d6e06000 1000
> xhci1: current IMOD 0
> xhci1: USBCMD 00000005
> usb2 at xhci1: USB revision 3.0
> usb2: WARNING: power management not supported
> usb3 at xhci1: USB revision 2.0
> usb3: WARNING: power management not supported
> ppb2 at pci0 dev 28 function 2: vendor 8086 product a292 (rev. 0xf0)
> ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
> ppb2: link is x2 @ 5.0GT/s
> ppb2: ioapic0 pin 18
>
> acpi0: MCFG: 003:00:0: Ok (cfg[0x100]=0x20010002)
> acpi0: MCFG: bus 3: valid devices
> acpi0: MCFG: 003:00:0
> acpi0: acpimcfg_map_bus done
> pci3: i/o space, memory space enabled
> xhci2 at pci3 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
> xhci2: interrupting at ioapic0 pin 18
> xhci2: xHCI version 1.10
> xhci2: hcs1=4000840 hcs2=840000fa hcs3=200000a
> xhci2: hcc=0x200eec1<XECP=0x200,MAXPSA=0xe,CFC,SEC,SPC,NSS,LTC,AC64>
> xhci2: xECP 800
> xhci2: hcc2=0x3f<CIC,LEC,CTC,FSC,CMC,U3C>
> xhci2: ECR: 0x00000401
> xhci2: ECR: 0x03010802
> xhci2: SP: 03010802 20425355 00000201 00000000
> xhci2: ss ports 1 - 2
> xhci2: ECR: 0x02000802
> xhci2: SP: 02000802 20425355 00190203 00000000
> xhci2: hs ports 3 - 4
> xhci2: ECR: 0x0000000a
> xhci2: PAGESIZE 0x00000001
> xhci2: sc_pgsz 0x00001000
> xhci2: sc_maxslots 0x00000040
> xhci2: sc_maxports 4
> xhci2: sc_maxspbuf 16
> xhci2: eventst: 000000025e45ef40 0xffffa200d6da5f40 1000
> xhci2: dcbaa: 000000025e4a1000 0xffffa200d6e23000 1000
> xhci2: current IMOD 0
> xhci2: USBCMD 00000005
> usb4 at xhci2: USB revision 3.0
> usb4: WARNING: power management not supported
> usb5 at xhci2: USB revision 2.0
> usb5: WARNING: power management not supported
> ppb3 at pci0 dev 29 function 0: vendor 8086 product a298 (rev. 0xf0)
> ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
> ppb3: ioapic0 pin 16
>
> acpi0: MCFG: 004:00:0: Ok (cfg[0x100]=0x15010001)
> acpi0: MCFG: bus 4: valid devices
> acpi0: MCFG: 004:00:0
> acpi0: acpimcfg_map_bus done
> pci4: i/o space, memory space enabled
> nvme0 at pci4 dev 0 function 0: vendor 8086 product 0a53 (rev. 0x02)
> nvme0: NVMe 1.0
> nvme0: interrupting at ioapic0 pin 16
> nvme0: INTEL SSDPE2MX450G7, firmware MDV10253, serial CVPF6345003M450RGN
> ld0 at nvme0 nsid 1
> ld0: 419 GB, 54721 cyl, 255 head, 63 sec, 512 bytes/sect x 879097968 sectors
> pcib0 at pci0 dev 31 function 0: vendor 8086 product a2c5 (rev. 0x00)
> vendor 8086 product a2a1 (miscellaneous memory) at pci0 dev 31 function 2 not configured
> hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
> hdaudio0: interrupting at ioapic0 pin 16
> hdafg0 at hdaudio0 vendor 0x10EC product 0x0900 nid 0x01: vendor 10ec product 0900
> hdafg0: DAC00 6ch: Speaker [Jack]
> nid=14 [pin: Speaker (Green Jack)]
> nid=0C [audio mixer] [source: dac, record]
> nid=02 [audio output] [source: dac]
> nid=0B [audio mixer] [source: record]
> nid=16 [pin: Speaker (Orange Jack)]
> nid=0E [audio mixer] [source: dac, record]
> nid=04 [audio output] [source: dac]
> nid=0B [audio mixer] [source: record]
> nid=15 [pin: Speaker (Black Jack)]
> nid=0D [audio mixer] [source: dac, record]
> nid=03 [audio output] [source: dac]
> nid=0B [audio mixer] [source: record]
> hdafg0: DAC01 2ch: HP Out [Jack]
> nid=1B [pin: HP Out (Green Jack)]
> nid=0F [audio mixer] [source: dac, record]
> nid=05 [audio output] [source: dac]
> nid=0B [audio mixer] [source: record]
> hdafg0: DIG02 2ch: SPDIF Out [Built-In]
> nid=11 [pin: SPDIF Out (Built-In)]
> nid=10 [audio output] [source: dac]
> hdafg0: DIG03 2ch: SPDIF Out [Jack]
> nid=1E [pin: SPDIF Out (Grey Jack)]
> nid=06 [audio output] [source: dac]
> hdafg0: ADC04 2ch: Line In [Jack], Mic In [Jack]
> nid=18 [pin: Mic In (Pink Jack)]
> nid=19 [pin: Mic In (Pink Jack)]
> nid=1A [pin: Line In (Blue Jack)]
> hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg0: full duplex, playback, capture, mmap, independent
> hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
> hdafg0: Latency: 128 milliseconds
> spkr0 at audio0: PC Speaker (synthesized)
> wsbell at spkr0 not configured
> hdafg1 at hdaudio0 vendor 0x8086 product 0x280B nid 0x01: vendor 8086 product 280b
> hdafg1: DP00 8ch: Digital Out [Jack]
> nid=03 [pin: Digital Out (Jack)]
> nid=02 [audio output] [source: dac]
> hdafg1: 8ch/0ch 48000Hz PCM16*
> ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a2a3 (rev. 0x00)
> ichsmb0: interrupting at ioapic0 pin 16
> iic0 at ichsmb0: I2C bus
> wm0 at pci0 dev 31 function 6: I219 LM Ethernet Connection (rev. 0x00)
> wm0: interrupting at ioapic0 pin 16
> wm0: PCI-Express bus
> wm0: Ethernet address 00:e0:dd:cc:bb:aa
> wm0: 0xa4080<FLASH,PCIE,ASF_FIRM,AMT>
> ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
> ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> isa0 at pcib0
> pckbc0 at isa0 port 0x60-0x64
> pckbdprobe: reset error 5
> pmsprobe: reset error 5
> wbsio_probe: id 0xc9, rev 0x13
> wbsio0 at isa0 port 0x4e-0x4f: Nuvoton LPC Super I/O NCT6792D rev D
> lm0 at wbsio0 port 0xa30-0xa37
> lm0: Using default temp sensors
> lm0: Nuvoton NCT6792D Hardware monitor
> lm0: WARNING: power management not supported
> Initializing SSP: dbd2ec04f635c1ec b0a3560015abfdfd 4e3f75e2d2c0ecf7 5ca1f4c2ae9ba8a6 6fa9c354de0beeb5 a18ca335aa623e21 ea22092f26f6fa0e 2429bc098b055ed7
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
> Xen vcpu0 clock: using event channel 7
> xenbus0: using event channel 8
> uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub0: 10 ports with 10 removable, self powered
> uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub1: 16 ports with 16 removable, self powered
> uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
> uhub4: 2 ports with 2 removable, self powered
> uhub5 at usb5: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
> uhub5: 2 ports with 2 removable, self powered
> IPsec: Initialized Security Association Processing.
> ahcisata0 port 0: device present, speed: 6.0Gb/s
> ahcisata0 port 1: PHY offline
> ahcisata0 port 2: PHY offline
> ahcisata0 port 3: PHY offline
> ahcisata0 port 4: PHY offline
> ahcisata0 port 5: PHY offline
> wd0 at atabus0 drive 0
> wd0: <PLEXTOR PX-128M5S>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
> wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
> uhidev0 at uhub3 port 1 configuration 1 interface 0
> uhidev0: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr 1, iclass 3/1
> ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
> wskbd0 at ukbd0 mux 1
> wskbd0: connecting to wsdisplay0
> uhidev1 at uhub3 port 1 configuration 1 interface 1
> uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr 1, iclass 3/1
> uhidev1: 2 report ids
> uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> crypto: assign driver 0, flags 2
> crypto: driver 0 registers alg 1 flags 0 maxoplen 0
> crypto: driver 0 registers alg 2 flags 0 maxoplen 0
> crypto: driver 0 registers alg 3 flags 0 maxoplen 0
> crypto: driver 0 registers alg 4 flags 0 maxoplen 0
> crypto: driver 0 registers alg 5 flags 0 maxoplen 0
> crypto: driver 0 registers alg 26 flags 0 maxoplen 0
> crypto: driver 0 registers alg 27 flags 0 maxoplen 0
> crypto: driver 0 registers alg 29 flags 0 maxoplen 0
> crypto: driver 0 registers alg 33 flags 0 maxoplen 0
> crypto: driver 0 registers alg 17 flags 0 maxoplen 0
> crypto: driver 0 registers alg 6 flags 0 maxoplen 0
> crypto: driver 0 registers alg 19 flags 0 maxoplen 0
> crypto: driver 0 registers alg 7 flags 0 maxoplen 0
> crypto: driver 0 registers alg 20 flags 0 maxoplen 0
> crypto: driver 0 registers alg 15 flags 0 maxoplen 0
> crypto: driver 0 registers alg 24 flags 0 maxoplen 0
> crypto: driver 0 registers alg 25 flags 0 maxoplen 0
> crypto: driver 0 registers alg 8 flags 0 maxoplen 0
> crypto: driver 0 registers alg 21 flags 0 maxoplen 0
> crypto: driver 0 registers alg 16 flags 0 maxoplen 0
> crypto: driver 0 registers alg 9 flags 0 maxoplen 0
> crypto: driver 0 registers alg 10 flags 0 maxoplen 0
> crypto: driver 0 registers alg 13 flags 0 maxoplen 0
> crypto: driver 0 registers alg 14 flags 0 maxoplen 0
> crypto: driver 0 registers alg 28 flags 0 maxoplen 0
> crypto: driver 0 registers alg 30 flags 0 maxoplen 0
> crypto: driver 0 registers alg 31 flags 0 maxoplen 0
> crypto: driver 0 registers alg 32 flags 0 maxoplen 0
> crypto: driver 0 registers alg 11 flags 0 maxoplen 0
> crypto: driver 0 registers alg 18 flags 0 maxoplen 0
> crypto: driver 0 registers alg 23 flags 0 maxoplen 0
> crypto: driver 0 registers alg 22 flags 0 maxoplen 0
> Searching for RAID components...
> WARNING: 70 errors while detecting hardware; check system log.
> boot device: wd0
> root on wd0a dumps on wd0b
> Your machine does not initialize mem_clusters; sparse_dumps disabled
> /: replaying log to memory
> root file system type: ffs
> kern.module.path=/stand/amd64-xen/8.99.25/modules
> /: replaying log to disk
> TXDCTL = 01410000
> RXDCTL(0) = 01010000
> XXX: pause_time = 0000
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
> nfs server 192.168.1.2:/disk/home: not responding
> nfs server 192.168.1.2:/disk/home: is alive again
> nfs server 192.168.1.2:/disk/sources: not responding
> nfs server 192.168.1.2:/disk/sources: is alive again
> balloon0 at xenbus0 id 0: Xen Balloon driver
> balloon0: current reservation: 4194304 KiB
> xbd backend: attach device vnd0d (size 67108864) for domain 1
> xvif1i0: Ethernet address 00:16:3e:01:00:15
> xbd backend domain 1 handle 0x3 (3) using event channel 13, protocol x86_64-abi
>
on dom0:
amd64# intrctl list
interrupt id CPU0 device name(s)
xenev0 channel 2 0* xencons0
ioapic0 pin 9 0* acpi SCI
ioapic0 pin 16 346967* ppb0, bnx0, xhci0, ahcisata0, ppb1, xhci1, ppb3, nvme0, hdaudio
ioapic0 pin 17 0* bnx1
ioapic0 pin 18 0* ppb2, xhci2
xenev0 channel 7 456437* vcpu0 clock
xenev0 channel 8 528* xenbus0
xenev0 channel 13 5907* xbdb1i3
xenev0 channel 14 3441* xvif1i0
amd64# cpuctl list
Num HwId Unbound LWPs Interrupts Last change #Intr
---- ---- ------------ ---------- ------------------------ -----
0 0 online intr Wed Sep 12 23:07:25 2018 0 <=== #Intr == 0?
> domU:
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
> 2018 The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 8.99.25 (XEN3_DOMU) #10: Wed Sep 12 17:27:52 JST 2018
> msaitoh%amd64.execsw.org@localhost:/disk/sources/4NetBSD-current/src/sys/arch/amd64/compile/XEN3_DOMU
> total memory = 3072 MB
> avail memory = 2964 MB
> cpu_rng: RDSEED
> timecounter: Timecounters tick every 10.000 msec
> Kernelized RAIDframe activated
> running cgd selftest aes-xts-256 aes-xts-512 done
> mainbus0 (root)
> hypervisor0 at mainbus0: Xen version 4.8.3nb0
> hypervisor0: features: mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
> VIRQ_DEBUG interrupt using event channel 3
> vcpu0 at hypervisor0
> vcpu0: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
> vcpu0: package 0, core 0, smt 0
> vcpu1 at hypervisor0
> vcpu1: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
> vcpu1: package 0, core 0, smt 0
> vcpu2 at hypervisor0
> vcpu2: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
> vcpu2: package 0, core 0, smt 0
> vcpu3 at hypervisor0
> vcpu3: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
> vcpu3: package 0, core 0, smt 0
> xenbus0 at hypervisor0: Xen Virtual Bus Interface
> xencons0 at hypervisor0: Xen Virtual Console Driver
> xencons0: console major 143, unit 0
> xencons0: using event channel 2
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
> Xen vcpu0 clock: using event channel 5
> Xen vcpu1 clock: using event channel 7
> Xen vcpu2 clock: using event channel 9
> Xen vcpu3 clock: using event channel 11
> xenbus0: using event channel 1
> IPsec: Initialized Security Association Processing.
> xenbus: can't get state for device/suspend/event-channel (2)
> xbd0 at xenbus0 id 3: Xen Virtual Block Device Interface
> xbd0: using event channel 12
> xennet0 at xenbus0 id 0: Xen Virtual Network Interface
> xennet0: MAC address 00:16:3e:00:00:15
> xennet0: using event channel 13
> balloon0 at xenbus0 id 0: Xen Balloon driver
> balloon0: current reservation: 3145728 KiB
> xbd0: 32768 MB, 512 bytes/sect x 67108864 sectors
> xennet0: using RX copy mode
> boot device: xbd0
> root on xbd0a dumps on xbd0b
> Your machine does not initialize mem_clusters; sparse_dumps disabled
> /: replaying log to memory
> root file system type: ffs
> kern.module.path=/stand/amd64-xen/8.99.25/modules
> xenbus: can't get state for device/suspend/event-channel (2)
> balloon0: current reservation: 786432 pages => target: 786432 pages
> ignore shutdown request:
> xenbus: can't get state for device/suspend/event-channel (2)
> /: replaying log to disk
>
>
--
-----------------------------------------------
SAITOH Masanobu (msaitoh%execsw.org@localhost
msaitoh%netbsd.org@localhost)
Home |
Main Index |
Thread Index |
Old Index