Re: kernel diagnostic assertion "psl == 0" failed

To: "Mathew, Cherry G." <cherry%zyx.in@localhost>, port-xen%netbsd.org@localhost
Subject: Re: kernel diagnostic assertion "psl == 0" failed
From: SAITOH Masanobu <msaitoh%execsw.org@localhost>
Date: Wed, 12 Sep 2018 23:47:04 +0900
On 2018/09/12 23:31, Mathew, Cherry G. wrote:
> On September 12, 2018 10:25:34 PM GMT+08:00, SAITOH Masanobu <msaitoh%execsw.org@localhost> wrote:
>> Hi.
>>
>> I got a panic on a dom0 while running ./build.sh on a domU's
>> NetBSD-current:
>>
>>> [ 1293.1834301] panic: kernel diagnostic assertion "psl == 0" failed:
>> file "../../../../arch/xen/x86/xen_intr.c", line 76
>>> [ 1293.1834301] cpu0: Begin traceback...
>>> [ 1293.1834301] vpanic() at netbsd:vpanic+0x152
>>> [ 1293.1834301] kern_assert() at netbsd:kern_assert+0x48
>>> [ 1293.1834301] spllower() at netbsd:spllower+0xbf
>>> [ 1293.1834301] mutex_exit() at netbsd:mutex_exit+0x14e
>>> [ 1293.1834301] evtchn_do_event() at netbsd:evtchn_do_event+0x362
>>> [ 1293.1834301] do_hypervisor_callback() at
>> netbsd:do_hypervisor_callback+0x196
>>> [ 1293.1834301] hypervisor_callback() at
>> netbsd:hypervisor_callback+0xb2
>>> [ 1293.1834301] Xresume_xenev6() at netbsd:Xresume_xenev6+0x49
>>> [ 1293.1834301] --- interrupt ---
>>> [ 1293.1834301] Xspllower() at netbsd:Xspllower+0xe
>>> [ 1293.1834301] trap() at netbsd:trap+0x819
>>> [ 1293.1834301] --- trap (number 3) ---
>>> [ 1293.1834301] 74450523e77a:
>>> [ 1293.1834301] cpu0: End traceback...
>>> [ 1293.1834301] Mutex error: mutex_vector_enter,525: assertion
>> failed: !cpu_intr_p()
>>>
>>> [ 1293.1834301] lock address : 0xffffb1000740ef78 type     :    
>> sleep/adaptive
>>> [ 1293.1834301] initialized  : 0xffffffff8081ef4e
>>> [ 1293.1834301] shared holds :                  0 exclusive:         
>>        0
>>> [ 1293.1834301] shares wanted:                  0 exclusive:         
>>        0
>>> [ 1293.1834301] current cpu  :                  0 last held:         
>>        0
>>> [ 1293.1834301] current lwp  : 0xffffb1000a71c480 last held:
>> 000000000000000000
>>> [ 1293.1834301] last locked  : 0xffffffff80835ef4 unlocked*:
>> 0xffffffff80835f25
>>> [ 1293.1834301] owner field  : 000000000000000000 wait/spin:         
>>      0/0
>>>
>>> [ 1293.1834301] Turnstile chain at 0xffffffff80e296b0.
>>> [ 1293.1834301] => No active turnstile for this lock.
>>
>> Is this known problem?
>>
>> Both dom0's kernel and domU's kernel are from yesterday's -current
>> source.
> 
> Hi - do you have a dmesg please to share? I'm trying to understand if this is related to my last two commits.
> 

dom0:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.99.25 (XEN3_DOM0) #91: Wed Sep 12 15:48:00 JST 2018
        msaitoh%amd64.execsw.org@localhost:/disk/sources/4NetBSD-current/src/sys/arch/amd64/compile/XEN3_DOM0
total memory = 4096 MB
avail memory = 3947 MB
No module info at boot
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
SMBIOS rev. 3.0 @ 0x8d30d000 (42 entries)
Supermicro C7Z270-CG (0123456789)
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
ACPI: XSDT 0x000000008C2400B0 0000E4 (v01 SUPERM SUPERM   01072009 AMI  00010013)
ACPI: FACP 0x000000008C268008 000114 (v06                 01072009 AMI  00010013)
ACPI: DSDT 0x000000008C240230 027DD2 (v02 SUPERM SMCI--MB 01072009 INTL 20160422)
ACPI: FACS 0x000000008C947C40 000040
ACPI: APIC 0x000000008C268120 000084 (v03                 01072009 AMI  00010013)
ACPI: FPDT 0x000000008C2681A8 000044 (v01                 01072009 AMI  00010013)
ACPI: MCFG 0x000000008C2681F0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008C268230 000377 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000008C2685A8 00009C (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: SSDT 0x000000008C268648 000877 (v02 Intel  PerfTune 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C268EC0 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
ACPI: SSDT 0x000000008C26C018 002544 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
ACPI: HPET 0x000000008C26E560 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008C26E598 000024 (v02 INTEL  OEM_RTD3 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C26E5C0 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C26F3A8 000BB0 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008C26FF58 000042 (v01 INTEL  EDK2     00000002      01000013)
ACPI: SSDT 0x000000008C26FFA0 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
ACPI: LPIT 0x000000008C270E80 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008C270F18 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008C270F40 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008C2711E0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000008C2741E8 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008C274220 000054 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: RMAD 0x000000008C274278 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
ACPI: ASF! 0x000000008C274320 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu1 at mainbus0 apid 2
cpu2 at mainbus0 apid 4
cpu3 at mainbus0 apid 6
hypervisor0 at mainbus0: Xen version 4.8.3nb0
hypervisor0: features:  pae_pgdir_above_4gb mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
VIRQ_DEBUG interrupt using event channel 1
vcpu0 at hypervisor0
vcpu0: 16 page colors
vcpu0: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
vcpu0: package 0, core 0, smt 0
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
xencons0: using event channel 2
acpi0 at hypervisor0: Intel ACPICA 20180810
acpi0: X/RSDT: OemId <SUPERM,  SUPERM,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=7
acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=7
acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=7
acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
acpi0: MCFG: PNP0C02: Type=4
acpi0: MCFG: PNP0C02: Type=7
acpi0: MCFG: PNP0C02: bus 0-255, address 0x00000000e0000000: no valid region
acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000fed10000, Length=0x0000000000008000
acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000fed18000, Length=0x0000000000001000
acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000fed19000, Length=0x0000000000001000
acpi0: MCFG: PNP0C02: Type=10(FIXED_MEMORY32), Address=0x00000000e0000000, Length=0x0000000010000000
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpi0: ACPI-Safe 24-bit timer
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
HPET (PNP0103) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
TIMR (PNP0100) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
IOTR (PNP0C02) at acpi0 not configured
GPI0 (INT345D) at acpi0 not configured
WMI1 (PNP0C14) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
WTBT (PNP0C14) at acpi0 not configured
PEPD (INT33A1) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PTMD (INT3394) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
FAN0 (PNP0C0B) at acpi0 not configured
FAN1 (PNP0C0B) at acpi0 not configured
FAN2 (PNP0C0B) at acpi0 not configured
FAN3 (PNP0C0B) at acpi0 not configured
FAN4 (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (TZ00)
acpitz0: polling interval 30.0 seconds
acpitz0: active cooling level 0: 71.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 50.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 40.0C
acpitz0: levels: critical 119.0 C
acpitz1 at acpi0 (TZ01)
acpitz1: polling interval 30.0 seconds
acpitz1: levels: critical 119.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F

acpi0: MCFG: 000:00:0: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:01:0: Ok (cfg[0x100]=0x14010002)
acpi0: MCFG: 000:02:0: Ok (cfg[0x100]=0x2001001b)
acpi0: MCFG: 000:08:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:20:0: invalid config space (cfg[0x100]=0xa2af8086, alias=true)
acpi0: MCFG: 000:20:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:22:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:23:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:28:0: Ok (cfg[0x100]=0x14010001)
acpi0: MCFG: 000:28:2: Ok (cfg[0x100]=0x14010001)
acpi0: MCFG: 000:29:0: Ok (cfg[0x100]=0x14000000)
acpi0: MCFG: 000:31:0: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:31:2: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: 000:31:3: invalid config space (cfg[0x100]=0xffffffff, alias=false)
acpi0: MCFG: 000:31:4: invalid config space (cfg[0x100]=0xa2a38086, alias=true)
acpi0: MCFG: 000:31:6: invalid config space (cfg[0x100]=0x00000000, alias=false)
acpi0: MCFG: bus 0: valid devices
acpi0: MCFG: 000:01:0
acpi0: MCFG: 000:02:0
acpi0: MCFG: 000:28:0
acpi0: MCFG: 000:28:2
acpi0: MCFG: 000:29:0
acpi0: acpimcfg_map_bus done
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: vendor 8086 product 591f (rev. 0x05)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 1901 (rev. 0x05)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
ppb0: ioapic0 pin 16

acpi0: MCFG: 001:00:0: Ok (cfg[0x100]=0x11010003)
acpi0: MCFG: 001:00:1: Ok (cfg[0x100]=0x11010003)
acpi0: MCFG: bus 1: valid devices
acpi0: MCFG: 001:00:0
acpi0: MCFG: 001:00:1
acpi0: acpimcfg_map_bus done
pci1: i/o space, memory space enabled
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address 00:10:18:5c:36:44
bnx0: interrupting at ioapic0 pin 16
bnx0: ASIC BCM5709 C0 (0x57092003)
bnx0: PCIe x4 2.5Gbps
bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address 00:10:18:5c:36:46
bnx1: interrupting at ioapic0 pin 17
bnx1: ASIC BCM5709 C0 (0x57092003)
bnx1: PCIe x4 2.5Gbps
bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vga0 at pci0 dev 2 function 0: vendor 8086 product 5912 (rev. 0x04)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 8086 product 1911 (miscellaneous system) at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product a2af (rev. 0x00)
xhci0: interrupting at ioapic0 pin 16
xhci0: xHCI version 1.0
xhci0: hcs1=1a000840 hcs2=14200054 hcs3=200000a
xhci0: hcc=0x200077c1<XECP=0x2000,MAXPSA=0x7,SEC,SPC,PAE,NSS,LTC,AC64>
xhci0: xECP 8000
xhci0: ECR: 0x02000802
xhci0:  SP: 02000802 20425355 30111001 00000000
xhci0:  hs ports 1 - 16
xhci0: ECR: 0x03001402
xhci0:  SP: 03001402 20425355 30000a11 00000000
xhci0:  ss ports 17 - 26
xhci0: ECR: 0x004dffc0
xhci0: ECR: 0x00002201
xhci0: ECR: 0x000003c6
xhci0: ECR: 0x002740c7
xhci0: ECR: 0x000040c2
xhci0: ECR: 0x0005100a
xhci0: ECR: 0x000030c3
xhci0: ECR: 0x000040c4
xhci0: ECR: 0x000000c5
xhci0: PAGESIZE 0x00000001
xhci0: sc_pgsz 0x00001000
xhci0: sc_maxslots 0x00000040
xhci0: sc_maxports 26
xhci0: sc_maxspbuf 34
xhci0: eventst: 000000025e45efc0 0xffffa200d6da5fc0 1000
xhci0: dcbaa: 000000025e45f000 0xffffa200d6da6000 1000
xhci0: current IMOD 1000
xhci0: USBCMD 00000005
xhci0: USB3PRM / USB3.0 configurable ports: 0x00000100
xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x000000c0
xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x00000006
xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x00000018
usb0 at xhci0: USB revision 3.0
usb0: WARNING: power management not supported
usb1 at xhci0: USB revision 2.0
usb1: WARNING: power management not supported
vendor 8086 product a2b1 (miscellaneous DASP) at pci0 dev 20 function 2 not configured
vendor 8086 product a2ba (miscellaneous communications) at pci0 dev 22 function 0 not configured
: vendor 8086 product a282 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 6 ports, 32 slots, CAP 0xe334ff45<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ppb1 at pci0 dev 28 function 0: vendor 8086 product a290 (rev. 0xf0)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
ppb1: link is x2 @ 5.0GT/s
ppb1: ioapic0 pin 16

acpi0: MCFG: 002:00:0: Ok (cfg[0x100]=0x20010002)
acpi0: MCFG: bus 2: valid devices
acpi0: MCFG: 002:00:0
acpi0: acpimcfg_map_bus done
pci2: i/o space, memory space enabled
xhci1 at pci2 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
xhci1: interrupting at ioapic0 pin 16
xhci1: xHCI version 1.10
xhci1: hcs1=4000840 hcs2=840000fa hcs3=200000a
xhci1: hcc=0x200eec1<XECP=0x200,MAXPSA=0xe,CFC,SEC,SPC,NSS,LTC,AC64>
xhci1: xECP 800
xhci1: hcc2=0x3f<CIC,LEC,CTC,FSC,CMC,U3C>
xhci1: ECR: 0x00000401
xhci1: ECR: 0x03010802
xhci1:  SP: 03010802 20425355 00000201 00000000
xhci1:  ss ports 1 - 2
xhci1: ECR: 0x02000802
xhci1:  SP: 02000802 20425355 00190203 00000000
xhci1:  hs ports 3 - 4
xhci1: ECR: 0x0000000a
xhci1: PAGESIZE 0x00000001
xhci1: sc_pgsz 0x00001000
xhci1: sc_maxslots 0x00000040
xhci1: sc_maxports 4
xhci1: sc_maxspbuf 16
xhci1: eventst: 000000025e45ef80 0xffffa200d6da5f80 1000
xhci1: dcbaa: 000000025e48d000 0xffffa200d6e06000 1000
xhci1: current IMOD 0
xhci1: USBCMD 00000005
usb2 at xhci1: USB revision 3.0
usb2: WARNING: power management not supported
usb3 at xhci1: USB revision 2.0
usb3: WARNING: power management not supported
ppb2 at pci0 dev 28 function 2: vendor 8086 product a292 (rev. 0xf0)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s
ppb2: link is x2 @ 5.0GT/s
ppb2: ioapic0 pin 18

acpi0: MCFG: 003:00:0: Ok (cfg[0x100]=0x20010002)
acpi0: MCFG: bus 3: valid devices
acpi0: MCFG: 003:00:0
acpi0: acpimcfg_map_bus done
pci3: i/o space, memory space enabled
xhci2 at pci3 dev 0 function 0: vendor 1b21 product 1242 (rev. 0x00)
xhci2: interrupting at ioapic0 pin 18
xhci2: xHCI version 1.10
xhci2: hcs1=4000840 hcs2=840000fa hcs3=200000a
xhci2: hcc=0x200eec1<XECP=0x200,MAXPSA=0xe,CFC,SEC,SPC,NSS,LTC,AC64>
xhci2: xECP 800
xhci2: hcc2=0x3f<CIC,LEC,CTC,FSC,CMC,U3C>
xhci2: ECR: 0x00000401
xhci2: ECR: 0x03010802
xhci2:  SP: 03010802 20425355 00000201 00000000
xhci2:  ss ports 1 - 2
xhci2: ECR: 0x02000802
xhci2:  SP: 02000802 20425355 00190203 00000000
xhci2:  hs ports 3 - 4
xhci2: ECR: 0x0000000a
xhci2: PAGESIZE 0x00000001
xhci2: sc_pgsz 0x00001000
xhci2: sc_maxslots 0x00000040
xhci2: sc_maxports 4
xhci2: sc_maxspbuf 16
xhci2: eventst: 000000025e45ef40 0xffffa200d6da5f40 1000
xhci2: dcbaa: 000000025e4a1000 0xffffa200d6e23000 1000
xhci2: current IMOD 0
xhci2: USBCMD 00000005
usb4 at xhci2: USB revision 3.0
usb4: WARNING: power management not supported
usb5 at xhci2: USB revision 2.0
usb5: WARNING: power management not supported
ppb3 at pci0 dev 29 function 0: vendor 8086 product a298 (rev. 0xf0)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
ppb3: ioapic0 pin 16

acpi0: MCFG: 004:00:0: Ok (cfg[0x100]=0x15010001)
acpi0: MCFG: bus 4: valid devices
acpi0: MCFG: 004:00:0
acpi0: acpimcfg_map_bus done
pci4: i/o space, memory space enabled
nvme0 at pci4 dev 0 function 0: vendor 8086 product 0a53 (rev. 0x02)
nvme0: NVMe 1.0
nvme0: interrupting at ioapic0 pin 16
nvme0: INTEL SSDPE2MX450G7, firmware MDV10253, serial CVPF6345003M450RGN
ld0 at nvme0 nsid 1
ld0: 419 GB, 54721 cyl, 255 head, 63 sec, 512 bytes/sect x 879097968 sectors
pcib0 at pci0 dev 31 function 0: vendor 8086 product a2c5 (rev. 0x00)
vendor 8086 product a2a1 (miscellaneous memory) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0 vendor 0x10EC product 0x0900 nid 0x01: vendor 10ec product 0900
hdafg0: DAC00 6ch: Speaker [Jack]
nid=14 [pin: Speaker (Green Jack)]
nid=0C [audio mixer] [source: dac, record]
nid=02 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
nid=16 [pin: Speaker (Orange Jack)]
nid=0E [audio mixer] [source: dac, record]
nid=04 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
nid=15 [pin: Speaker (Black Jack)]
nid=0D [audio mixer] [source: dac, record]
nid=03 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
hdafg0: DAC01 2ch: HP Out [Jack]
nid=1B [pin: HP Out (Green Jack)]
nid=0F [audio mixer] [source: dac, record]
nid=05 [audio output] [source: dac]
nid=0B [audio mixer] [source: record]
hdafg0: DIG02 2ch: SPDIF Out [Built-In]
nid=11 [pin: SPDIF Out (Built-In)]
nid=10 [audio output] [source: dac]
hdafg0: DIG03 2ch: SPDIF Out [Jack]
nid=1E [pin: SPDIF Out (Grey Jack)]
nid=06 [audio output] [source: dac]
hdafg0: ADC04 2ch: Line In [Jack], Mic In [Jack]
nid=18 [pin: Mic In (Pink Jack)]
nid=19 [pin: Mic In (Pink Jack)]
nid=1A [pin: Line In (Blue Jack)]
hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0 vendor 0x8086 product 0x280B nid 0x01: vendor 8086 product 280b
hdafg1: DP00 8ch: Digital Out [Jack]
nid=03 [pin: Digital Out (Jack)]
nid=02 [audio output] [source: dac]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a2a3 (rev. 0x00)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
wm0 at pci0 dev 31 function 6: I219 LM Ethernet Connection (rev. 0x00)
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: Ethernet address 00:e0:dd:cc:bb:aa
wm0: 0xa4080<FLASH,PCIE,ASF_FIRM,AMT>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbdprobe: reset error 5
pmsprobe: reset error 5
wbsio_probe: id 0xc9, rev 0x13
wbsio0 at isa0 port 0x4e-0x4f: Nuvoton LPC Super I/O NCT6792D rev D
lm0 at wbsio0 port 0xa30-0xa37
lm0: Using default temp sensors
lm0: Nuvoton NCT6792D Hardware monitor
lm0: WARNING: power management not supported
Initializing SSP: dbd2ec04f635c1ec b0a3560015abfdfd 4e3f75e2d2c0ecf7 5ca1f4c2ae9ba8a6 6fa9c354de0beeb5 a18ca335aa623e21 ea22092f26f6fa0e 2429bc098b055ed7
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
Xen vcpu0 clock: using event channel 7
xenbus0: using event channel 8
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 16 ports with 16 removable, self powered
uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub5: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: PHY offline
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
ahcisata0 port 4: PHY offline
ahcisata0 port 5: PHY offline
wd0 at atabus0 drive 0
wd0: <PLEXTOR PX-128M5S>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr 1, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr 1, iclass 3/1
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
Searching for RAID components...
WARNING: 70 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
Your machine does not initialize mem_clusters; sparse_dumps disabled
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/amd64-xen/8.99.25/modules
/: replaying log to disk
TXDCTL = 01410000
RXDCTL(0) = 01010000
XXX: pause_time = 0000
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
nfs server 192.168.1.2:/disk/home: not responding
nfs server 192.168.1.2:/disk/home: is alive again
nfs server 192.168.1.2:/disk/sources: not responding
nfs server 192.168.1.2:/disk/sources: is alive again
balloon0 at xenbus0 id 0: Xen Balloon driver
balloon0: current reservation: 4194304 KiB
xbd backend: attach device vnd0d (size 67108864) for domain 1
xvif1i0: Ethernet address 00:16:3e:01:00:15
xbd backend domain 1 handle 0x3 (3) using event channel 13, protocol x86_64-abi


domU:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.99.25 (XEN3_DOMU) #10: Wed Sep 12 17:27:52 JST 2018
        msaitoh%amd64.execsw.org@localhost:/disk/sources/4NetBSD-current/src/sys/arch/amd64/compile/XEN3_DOMU
total memory = 3072 MB
avail memory = 2964 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
mainbus0 (root)
hypervisor0 at mainbus0: Xen version 4.8.3nb0
hypervisor0: features:  mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
VIRQ_DEBUG interrupt using event channel 3
vcpu0 at hypervisor0
vcpu0: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
vcpu0: package 0, core 0, smt 0
vcpu1 at hypervisor0
vcpu1: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
vcpu1: package 0, core 0, smt 0
vcpu2 at hypervisor0
vcpu2: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
vcpu2: package 0, core 0, smt 0
vcpu3 at hypervisor0
vcpu3: Intel(R) Core(TM) i5-7600T CPU @ 2.80GHz, id 0x906e9
vcpu3: package 0, core 0, smt 0
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
xencons0: using event channel 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
Xen vcpu0 clock: using event channel 5
Xen vcpu1 clock: using event channel 7
Xen vcpu2 clock: using event channel 9
Xen vcpu3 clock: using event channel 11
xenbus0: using event channel 1
IPsec: Initialized Security Association Processing.
xenbus: can't get state for device/suspend/event-channel (2)
xbd0 at xenbus0 id 3: Xen Virtual Block Device Interface
xbd0: using event channel 12
xennet0 at xenbus0 id 0: Xen Virtual Network Interface
xennet0: MAC address 00:16:3e:00:00:15
xennet0: using event channel 13
balloon0 at xenbus0 id 0: Xen Balloon driver
balloon0: current reservation: 3145728 KiB
xbd0: 32768 MB, 512 bytes/sect x 67108864 sectors
xennet0: using RX copy mode
boot device: xbd0
root on xbd0a dumps on xbd0b
Your machine does not initialize mem_clusters; sparse_dumps disabled
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/amd64-xen/8.99.25/modules
xenbus: can't get state for device/suspend/event-channel (2)
balloon0: current reservation: 786432 pages => target: 786432 pages
ignore shutdown request:
xenbus: can't get state for device/suspend/event-channel (2)
/: replaying log to disk


-- 
-----------------------------------------------
                SAITOH Masanobu (msaitoh%execsw.org@localhost
                                 msaitoh%netbsd.org@localhost)
Follow-Ups:
- Re: kernel diagnostic assertion "psl == 0" failed
  - From: Mathew, Cherry G.
- Re: kernel diagnostic assertion "psl == 0" failed
  - From: SAITOH Masanobu
References:
- kernel diagnostic assertion "psl == 0" failed
  - From: SAITOH Masanobu
- Re: kernel diagnostic assertion "psl == 0" failed
  - From: Mathew, Cherry G.
Prev by Date: Re: kernel diagnostic assertion "psl == 0" failed
Next by Date: Re: kernel diagnostic assertion "psl == 0" failed
Previous by Thread: Re: kernel diagnostic assertion "psl == 0" failed
Next by Thread: Re: kernel diagnostic assertion "psl == 0" failed
Indexes:
Home | Main Index | Thread Index | Old Index