NetBSD on Tadpole SPARCLE 500SX

[Julian Coleman <jdc%coris.org.uk@localhost>]

Hi,

I've just tried network booting a Tadpole SPARCLE 500SX.  dmesg is:

  - - 8< - - - - - - - - - - - - - Cut here - - - - - - - - - - - - - >8 - -

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.55 (ULTRA-PCI) #1: Thu Sep  8 21:31:14 BST 2011
        
root%sirion.coris.org.uk@localhost:/usr/obj/sparc64/usr/src/sys/arch/sparc64/compile/ULTRA-PCI
total memory = 512 MB
avail memory = 317 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): TAD,SPARCLE (SPARCLE 500SX): hostid 80ce005c
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, UPA id 0
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
psycho0: pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 255; PCI bus 0
pci0 at psycho0
pci0: i/o space, memory space enabled
Altera product 0x0000 (miscellaneous bridge, revision 0x01) at pci0 dev 12 
function 0 not configured
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
dma at ebus0 addr 0-ffff not configured
com0 at ebus0 addr 3f8-3ff ipl 2b: ns16550a, working fifo
8042 at ebus0 addr 60-67, 60-67 ipl 29 ipl 26 ipl 2a not configured
TAD,wb-memstick at ebus0 addr 148-14f ipl e not configured
TAD,wb-sdcard at ebus0 addr 358-35f ipl a not configured
alipm0 at pci0 dev 17 function 0: 74KHz clock
iic0 at alipm0: I2C bus
tlp0 at pci0 dev 1 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:00:83:ce:00:5c
dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev. 0
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wi0 at pci0 dev 11 function 0: Intersil PRISM2.5 Mini-PCI WLAN (rev. 0x01)
wi0: interrupting at ivec 14
wi0: 802.11 address 00:90:96:4b:0c:8b
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.4.9)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ohci0 at pci0 dev 2 function 0: NEC USB Host Controller (rev. 0x43)
ohci0: interrupting at ivec 1c
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 1: NEC USB Host Controller (rev. 0x43)
ohci1: interrupting at ivec 1d
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 2 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at ivec 1e
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
cbb0 at pci0 dev 3 function 0pccbb_attach_hook: 256 >= busses exist
: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio 
Device (rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 
0xc3)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access 
bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
genfb0 at pci0 dev 19 function 0: ATI Technologies Rage L Mobility (PCI)
genfb0: framebuffer at 0x3000000, size 1400x1050, depth 8, stride 1400
wsdisplay0 at genfb0 kbdmux 1: console (default, sun emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, sun emulation)
drm at genfb0 not configured
cbb0: cacheline 0x10 lattimer 0xff
cbb0: bhlc 0x82ff10
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at ivec 1a
cardslot0 at cbb0
pcmcia0 at cardslot0
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 500000000 Hz quality 100
No counter-timer -- using %tick at 500MHz as system clock.
uhub0 at usb0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R2212, 234Q327001, 1013> cdrom 
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4
Kernelized RAIDframe activated
root on tlp0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.13.100
nfs_boot: my_name=salamander
nfs_boot: my_domain=coris.org.uk
nfs_boot: my_addr=192.168.13.119
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.13.1
root on anor.int.coris.org.uk:/export/salamander/root
root file system type: nfs
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!

  - - 8< - - - - - - - - - - - - - Cut here - - - - - - - - - - - - - >8 - -

The keyboard and mouse hide behind "8042 at ebus0" like some of the 
Javastations.  I'm not sure where the clock lives.

Thanks,

J

-- 
  My other computer also runs NetBSD    /        Sailing at Newbiggin
        http://www.netbsd.org/        /   http://www.newbigginsailingclub.org/