Port-i386 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: i386 MP default configuration support [EISA trap]



Am 29.05.2013 21:45, schrieb Felix Deichmann:
dmesg appended, the system seems stable, at least with the current
PCI cards.

I could now test with an Adaptec AHA-2740/42W EISA card instead of the AHA-2940 PCI card, and the kernel traps when SMP is enabled. :/

The trap occurs independently of the card configured as level- or edge-interrupting (below output is for edge-triggered, as can be seen from int11/irq 11).
The machine boots fine with the EISA card when SMP is disabled.

How can I further assist in debugging this?


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1 (GENERIC) #1: Wed May 29 19:55:53 CEST 2013
        root@bla:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 127 MB
avail memory = 112 MB
mainbus0 (root)
acpi_probe: failed to initialize tables
mainbus0: Intel MP Specification (Version 1.1)
mainbus0: MP default configuration 6
cpu0 at mainbus0 apid 0cpu0: prelint0 0x700<vector=0x0,delmode=0x7,dest=0x0> 0x0<target=0x0>
cpu0: prelint1 0x400<vector=0x0,delmode=0x4,dest=0x0> 0x0<target=0x0>
cpu0: timer0 0x10000<vector=0x0,delmode=0x0,masked,dest=0x0> 0x0<target=0x0>
cpu0: pcint0 0x0<vector=0x0,delmode=0x0,dest=0x0> 0x0<target=0x0>
cpu0: lint0 0x700<vector=0x0,delmode=0x7,dest=0x0> 0x0<target=0x0>
cpu0: lint1 0x400<vector=0x0,delmode=0x4,dest=0x0> 0x0<target=0x0>
cpu0: err0 0x10000<vector=0x0,delmode=0x0,masked,dest=0x0> 0x0<target=0x0>
: Intel 586-class, 100MHz, id 0x526
cpu1 at mainbus0 apid 1: Intel 586-class, id 0x2526
ioapic0 at mainbus0 apid 2, virtual wire mode
ioapic0: int0 attached to ExtINT (type 0x3<type=0x3=ExtINT> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int1 attached to eisa0 EISA irq 1 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int2 attached to eisa0 EISA irq 0 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int3 attached to eisa0 EISA irq 3 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int4 attached to eisa0 EISA irq 4 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int5 attached to eisa0 EISA irq 5 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int6 attached to eisa0 EISA irq 6 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int7 attached to eisa0 EISA irq 7 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int8 attached to eisa0 EISA irq 8 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int9 attached to eisa0 EISA irq 9 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int10 attached to eisa0 EISA irq 10 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int11 attached to eisa0 EISA irq 11 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int12 attached to eisa0 EISA irq 12 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int13 attached to eisa0 EISA irq 13 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int14 attached to eisa0 EISA irq 14 (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>) ioapic0: int15 attached to eisa0 EISA irq 15 (type 0x0<type=0x0> flags 0xd<pol=0x1=Act Hi,trig=0x3=Level>) local apic: int0 attached to ExtINT (type 0x3<type=0x3=ExtINT> flags 0x0<pol=0x0,trig=0x0>) local apic: int1 attached to NMI (type 0x1<type=0x1=NMI> flags 0x0<pol=0x0,trig=0x0>)
pci0 at mainbus0 bus 0: configuration mode 2
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x04a3 (rev. 0x11)
pceb0 at pci0 dev 1 function 0
pceb0: vendor 0x8086 product 0x0482 (rev. 0x05)
pciide0 at pci0 dev 2 function 0: vendor 0x1042 product 0x1000 (rev. 0x01)
pciide0: I/O access disabled at device
epic0 at pci0 dev 15 function 0: SMC 83c170 Fast Ethernet (rev. 0x08)
ioapic0: int15 0x8060<vector=0x60,delmode=0x0,level,dest=0x0> 0x0<target=0x0>
epic0: interrupting at ioapic0 pin 15
epic0: SMC9432TX, Ethernet address 00:e0:29:xx:xx:xx
qsphy0 at epic0 phy 3: QS6612 10/100 media interface, rev. 1
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0 at pceb0
ahc1 at eisa0 slot 3: Adaptec AHA-274x SCSI
uvm_fault(0xc0c8d9e0, 0, 1) -> 0xe
uvm_fault(0xc0c8d9e0, 0, 1) -> 0xe
fatal page fault in supervisor mode
trap type 6 code 0 eip c07dea95 cs 8 eflags 10246 cr2 0 ilevel 8
kernel: supervisor trap page fault, code=0
Stopped in pid 0.1 (system) at  netbsd:trap+0x6e0:      movzbl  0(%eax),%edx
db{0}> trace
trap() at netbsd:trap+0x6e0
--- trap (number 6) ---
?(b,c114a1f0,b,2,6,c0147de8,c1234c00,0,c1234c00,c0c4c0fc) at 0
eisa_intr_establish(0,10020b0b,2,6,c0147de8,c1234c00,0,b,c0bd5fa0,c0b2a3fb) at netbsd:eisa_intr_establish+0x7a ahc_eisa_attach(c1229ac0,c1229940,c0de0ab8,c1229940,3,c0bd5fa0,0,c0de0ae8,c02b9455,c1229ac0) at netbsd:ahc_eisa_attach+0x271 config_attach_loc(c1229ac0,c0bc47a8,c0de0ab0,c0de0ab8,c02b9514,c077e89e,c0bd9220,c0bd5fc0,c1229ac0,10) at netbsd:config_attach_loc+0x1a5 eisaattach(c11bb180,c1229ac0,c0de0b44,c1229ac0,c11bb180,c0de0b44,0,c0de0b2c,c077f3f1,c11bb180) at netbsd:eisaattach+0x1b3 config_attach_loc(c11bb180,c0bc6e60,0,c0de0b44,c02b97f4,0,c0de0b60,c065b596,c11bb180,c0b24bf7) at netbsd:config_attach_loc+0x1a5 config_found_ia(c11bb180,c0b24bf7,c0de0b44,c02b97f4,0,c0bd5fa0,c0bd5fc0,c0bd9220,0,c0c3bcbc) at netbsd:config_found_ia+0x36 pceb_callback(c11bb180,2,c11bb480,c11bb480,c0bc7ce8,c0b3c2a1,c0de0ba4,c077f1d9,c11bbc00,c11bb480) at netbsd:pceb_callback+0x4f config_process_deferred(c11bbc00,c11bb480,c0de0be0,c11bb480,c0b24bc0,c114d080,c11bbc00,c0de0bc4,c077f3f1,c11bbc00) at netbsd:config_process_deferred+0x44 config_attach_loc(c11bbc00,c0bc5dc8,0,c0de0be0,c0662ab4,0,c0de0c1c,c05a2b80,c11bbc00,c0b24bc0) at netbsd:config_attach_loc+0x1c7 config_found_ia(c11bbc00,c0b24bc0,c0de0be0,c0662ab4,c0de0be0,c0bd5fa0,c0bd5fa0,c0bd5fc0,c0c375e0,0) at netbsd:config_found_ia+0x36 mainbus_rescan(c11bbc00,c0b24bc0,0,c11bbc00,c11d8de0,c0ba3703,c0b92ef7,c0de0c60,c05292fb,c11d8de0) at netbsd:mainbus_rescan+0x246 mainbus_attach(0,c11bbc00,0,c11bbc00,0,c0b23e8c,de6000,c0de0cc4,c077f271,0) at netbsd:mainbus_attach+0xfc config_attach_loc(0,c0bc5db0,0,0,0,c0de0ce4,c077f2b5,0,c0bc5db0,0) at netbsd:config_attach_loc+0x1a5 config_attach(0,c0bc5db0,0,0,1986,c0c73680,c0de0cf8,c01ef90a,c0b23e8c,0) at netbsd:config_attach+0x2e config_rootfound(c0b23e8c,0,1986,c0de0d40,c04bbc5d,c0b69b02,6,3,0,0) at netbsd:config_rootfound+0x42
cpu_configure(c0b69b02,6,3,0,0,0,0,0,0,0) at netbsd:cpu_configure+0x2a
main(0,0,0,0,0,0,0,0,0,0) at netbsd:main+0x29f
db{0}> show event
evcnt type 0: bus_dma loads = 2
evcnt type 0: vmemev bt_inuse = 97
evcnt type 0: vmemev bt_count = 346
evcnt type 0: vmemev bt_pages = 1
db{0}> show uvmexp
Current UVM status:
  pagesize=4096 (0x1000), pagemask=0xfff, pageshift=12
, ncolors=2  28874 VM pages: 0 active, 0 inactive, 0 wired, 28447 free
  pages  0 anon, 0 file, 0 exec
  freemin=0, free-target=0, wired-max=0
  cpu0:
    faults=2, traps=2, intrs=0, ctxswitch=0
    softint=0, syscalls=0
  cpu1:
    faults=0, traps=0, intrs=0, ctxswitch=0
    softint=0, syscalls=0
  fault counts:
    noram=0, noanon=0, pgwait=0, pgrele=0
    ok relocks(total)=0(0), anget(retrys)=0(0), amapcopy=0
    neighbor anon/obj pg=0/0, gets(lock/unlock)=0/0
    cases: anon=0, anoncow=0, obj=0, prcopy=0, przero=0
  daemon and swap counts:
    woke=0, revs=0, scans=0, obscans=0, anscans=0
    busy=0, freed=0, reactivate=0, deactivate=0
    pageouts=0, pending=0, nswget=0
    nswapdev=0, swpgavail=0
    swpages=0, swpginuse=0, swpgonly=0, paging=0
db{0}> show reg
ds          c0c30010    sysent+0x1490
es          65650010
fs          38630030
gs          c0c60010    iplcrc+0x3d0
edi         c0de0960
esi         6
ebp         c0de0954
ebx         c0c31760    lwp0
edx         c0de0918
ecx         c0c321e0    proc0
eax         0
eip         c07dea95    trap+0x6e0
cs          8
eflags      10246
esp         c0de08cc
ss          10
netbsd:trap+0x6e0:      movzbl  0(%eax),%edx
db{0}>



Home | Main Index | Thread Index | Old Index