Port-i386 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
6.0.1 upgrade dhcp problem
I've run into a problem trying to upgrade NetBSD/i386 6.0 to 6.0.1.
I booted from a CD made from the 6.0.1 boot.iso file and attempted to
use ftp to get the 6.0.1 install files but the NIC wasn't being
configured properly, as per the output below when I just attempted to
configure the NIC from sysinst's Utility menu.
I used this technique to upgrade this PC from version 5.1.2 to 6.0 so
I thought the 6.0 install CD would work when I tested it (after
having difficulties), but no, today it wouldn't configure the NIC
either. However, the 5.2 install CD does. Can anyone suggest why?
By the way, can I use the 5.2 install CD to downgrade from 6.0 to
5.2? I suspect upgrading to 6.0 has stopped arpwatch working.
Ray
Using the NetBSD 6.0.1 install CD
---------------------------------
excerpt from dmesg:
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller
with 82562ET/EZ (CNR) PHY (rev. 0x81)
fxp0: interrupting at irq 12
fxp0: Ethernet address 00:10:dc:7b:92:a9
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
e: Utility menu
c: Configure network
I have found the following network interfaces: sk0 fwip0 fxp0
Which device shall I use? [sk0]: fxp0
To be able to use the network, we need answers to the following:
Network media type [autoselect]:
......................................
. Perform DHCP autoconfiguration? .
. .
.>a: Yes .
. b: No .
......................................
Your DNS domain [test.com]:
Your host name: ttt
......................................
. Perform IPv6 autoconfiguration? .
. .
.>a: No .
. b: Yes .
......................................
Status: Finished
Command: /sbin/dhcpcd -d -n fxp0
--------------------------------------------------------------------------------
dhcpcd[60]: fxp0: broadcasting for a lease
dhcpcd[60]: fxp0: sending DISCOVER (xid 0x25ec702e), next in 4.97 seconds
dhcpcd[60]: fxp0: sending DISCOVER (xid 0x25ec702e), next in 7.35 seconds
dhcpcd[60]: fxp0: offered 192.168.36.135 from 192.168.36.1
dhcpcd[60]: fxp0: sending REQUEST (xid 0x25ec702e), next in 3.19 seconds
dhcpcd[60]: fxp0: ignoring offer of 192.168.36.135 from 192.168.36.24
dhcpcd[60]: fxp0: acknowledged 192.168.36.135 from 192.168.36.1
dhcpcd[60]: fxp0: checking for 192.168.36.135
dhcpcd[60]: fxp0: sending ARP probe (1 of 3), next in 1.84 seconds
dhcpcd[60]: fxp0: sending ARP probe (2 of 3), next in 1.78 seconds
dhcpcd[60]: fxp0: sending ARP probe (3 of 3), next in 2.00 seconds
dhcpcd[60]: fxp0: leased 192.168.36.135 for 604800 seconds
dhcpcd[60]: fxp0: adding IP address 192.168.36.135/23
dhcpcd[60]: fxp0: adding route to 192.168.36.0/23
dhcpcd[60]: fxp0: adding default route via 192.168.36.30
dhcpcd[60]: fxp0: writing lease `/var/db/dhcpcd-fxp0.lease'
dhcpcd[60]: fxp0: executing `/libexec/dhcpcd-run-hooks', reason BOUND
dhcpcd[60]: forking to background
dhcpcd[60]: forked to background, child pid 59
The following are the values you entered.
DNS Domain: test.com
Host Name: ttt
Primary Interface: fxp0
Host IP: <none>
Netmask: <none>
IPv4 Nameserver: 192.168.36.1
IPv4 Gateway: <none>
Media type: autoselect
IPv6 autoconf: no
IPv6 Nameserver: <none>
...................
. Are they OK? .
. .
.>a: Yes .
. b: No .
...................
Status: Command failed
Command: /sbin/ping -v -c 5 -w 5 -o -n 192.168.36.1
Hit enter to continue
--------------------------------------------------------------------------------
PING 192.168.36.1
(192.168.36.1): 52 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
----192.168.36.1
PING Statistics----
5 packets transmitted, 0 packets received, 100.0% packet loss
Using NetBSD 5.2 install CD
---------------------------
Status: Finished
Command: /sbin/dhclient -q -pf /tmp/dhclnt.pid -lf
/tmp/dhclient.leases fxp0
--------------------------------------------------------------------------------
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 18
DHCPOFFER from 192.168.36.1
DHCPREQUEST on fxp0 to 255.255.255.255 port 67
DHCPACK from 192.168.36.24
bound to 192.168.36.135 -- renewal in 298596 seconds.
The following are the values you entered.
DNS Domain: test.com
Host Name: tt5
Primary Interface: fxp0
Host IP: 192.168.36.135
Netmask: 255.255.254.0
IPv4 Nameserver: 192.168.36.1
IPv4 Gateway: 192.168.36.30
Media type: autoselect
IPv6 autoconf: no
IPv6 Nameserver: <none>
...................
. Are they OK? .
. .
.>a: Yes .
. b: No .
...................
Status: Finished
Command: /sbin/route -n flush -inet
--------------------------------------------------------------------------------
default 192.168.36.30 done
192.168.36.135 127.0.0.1 done
Status: Finished
Command: /sbin/route -n add default 192.168.36.30
--------------------------------------------------------------------------------
add net default: gateway 192.168.36.30
Waiting while network interface comes up.
Status: Finished
Command: /sbin/ping -v -c 5 -w 5 -o -n 192.168.36.1
--------------------------------------------------------------------------------
PING 192.168.36.1
(192.168.36.1): 56 data bytes
[*** sequence gap of 2 packets from 0 ... 1 ***]
64 bytes from 192.168.36.1: icmp_seq=2 ttl=255 time=0.210 ms
----192.168.36.1
PING Statistics----
3 packets transmitted, 1 packets received, 66.7% packet loss
round-trip min/avg/max/stddev = 0.210/0.210/0.210/0.000 ms
Status: Finished
Command: /sbin/ping -v -c 5 -w 5 -o -n 192.168.36.30
--------------------------------------------------------------------------------
PING 192.168.36.30
(192.168.36.30): 56 data bytes
64 bytes from 192.168.36.30: icmp_seq=0 ttl=255 time=1.402 ms
----192.168.36.30
PING Statistics----
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 1.402/1.402/1.402/0.000 ms
Home |
Main Index |
Thread Index |
Old Index