NetBSD-5 against my DVD/CD drive

[Aleksey Cheusov <cheusov%tut.by@localhost>]

NetBSD-5 (netbsd-5 branch) doesn't like my DVD/CD drive.

It "works" like this:
- I mount dvd and it is mounted correctly.
  I'm able to read files from it and so on.
- umount succeeds but I cannot eject CD from it.
- In /var/log/messages I see the following

  Dec 12 20:17:41 chen /netbsd: cd0(viaide0:1:0): Sense Error Code 0x44

I also see the same message in dmesg(8) output

What's happening and to fix the problem?
dmesg is below.

==============================================================================
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #1: Sat Dec  5 23:30:28 EET 2009
        
cheusov%chen.chizhovka.net@localhost:/srv/obj/sys/arch/i386/compile/GENERIC
total memory = 1535 MB
avail memory = 1497 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
VIA Technologies, Inc. VT8366-8233A ( )
mainbus0 (root)
cpu0 at mainbus0: AMD 686-class, 800MHz, id 0x642
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <VIA694,AWRDACPI,42302e31>, AslId <AWRD,00000000>
LNKA: ACPI: Found matching pin for 0.8.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.9.INTA at func 0: 10
LNKC: ACPI: Found matching pin for 0.10.INTA at func 0: 12
LNKD: ACPI: Found matching pin for 0.10.INTB at func 1: 5
LNKA: ACPI: Found matching pin for 0.10.INTC at func 2: 11
LNKC: ACPI: Found matching pin for 0.12.INTA at func 0: 12
LNKA: ACPI: Found matching pin for 0.17.INTA at func 1: 255
LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 12
LNKD: ACPI: Found matching pin for 0.17.INTD at func 2: 5
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 70.0C critical 80.0C passive 
21.5C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x3099 (rev. 0x00)
agp0 at pchb0 (v2): aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb099 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x5964 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
rtk0 at pci0 dev 8 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:e0:4c:14:2e:d1
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
satalink0 at pci0 dev 9 function 0
satalink0: Silicon Image SATALink 3112 (rev. 0x02)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using irq 10 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
uhci0 at pci0 dev 10 function 0: vendor 0x1106 product 0x3038 (rev. 0x61)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 10 function 1: vendor 0x1106 product 0x3038 (rev. 0x61)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 10 function 2: vendor 0x1106 product 0x3104 (rev. 0x63)
ehci0: interrupting at irq 11
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
fxp0 at pci0 dev 12 function 0: i82558 Ethernet, rev 5
fxp0: interrupting at irq 12
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:90:27:34:c1:c6
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3147 (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8233A ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus2 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus3 at viaide0 channel 1
uhci2 at pci0 dev 17 function 2: vendor 0x1106 product 0x3038 (rev. 0x23)
uhci2: interrupting at irq 5
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 17 function 3: vendor 0x1106 product 0x3038 (rev. 0x23)
uhci3: interrupting at irq 5
usb4 at uhci3: USB revision 1.0
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8233A AC'97 Audio (rev 
0x40)
auvia0: interrupting at irq 12
auvia0: ac97: Avance Logic ALC200/ALC201 codec; headphone, 18 bit DAC, 18 bit 
ADC, Realtek 3D
auvia0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
audio0 at auvia0: full duplex, playback, capture, mmap, independent
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
satalink0: port 0: device present, speed: 1.5Gb/s
satalink0: port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <ST3320620AS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <ST3320620AS>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0: <QUANTUM FIREBALLP AS30.0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 28629 MB, 58168 cyl, 16 head, 63 sec, 512 bytes/sect x 58633344 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3 at atabus2 drive 1: <SAMSUNG SP0802N>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 76351 MB, 155127 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd3(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <Optiarc DVD RW AD-7203A, , 1.09> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/57.01, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/57.01, addr 2, iclass 3/0
uhidev1: 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd3
root on wd3a dumps on wd3b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Multi, Flash Reader, 1.00> disk removable
sd0: fabricating a geometry
sd0: 246 MB, 246 cyl, 64 head, 32 sec, 512 bytes/sect x 504320 sectors
sd0: fabricating a geometry
umass0: at uhub2 port 4 (addr 2) disconnected
sd0: detached
scsibus0: detached
umass0: detached
cd0(viaide0:1:0): Sense Error Code 0x44


-- 
Best regards, Aleksey Cheusov.