Port-i386 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Can't boot P1 with -current CD



I've tried to boot a P1 using a CD made from the boot-com.iso file from NetBSD/i386 -current, CVS updated on 13 March 2009, but it didn't get a far as running sysinst. I presume even new versions of NetBSD/i386 are supposed to run on machines of this vintage? I'll append the console output to this email.


Ray


Using default boot option
-------------------------

 VESA VBE Version 2.0 8192 k
Welcome to the NetBSD 5.99.8 boot-only install CD
===============================================================================

This CD contains only the installation program.  Binary sets to complete the
installation must be downloaded separately.  The installer can download them
if this machine has a working internet connection.

ACPI (Advanced Configuration and Power Interface) should work on all modern
and legacy hardware.  However if you do encounter a problem while booting,
try disabling it and report a bug at http://www.netbsd.org/.

     1. Install NetBSD
     2. Install NetBSD (no ACPI)
     3. Install NetBSD (no ACPI, no SMP)
     4. Drop to boot prompt

Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 0
booting cd0a:netbsd
8874208+405940+538728 [457360+443789]=0xa3af20
Loading cd9660
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.8 (GENERIC) #0: Fri Mar 13 21:22:48 EST 2009
        ray%tst.jkmrc.uq.edu.au@localhost:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 65148 KB
avail memory = 53396 KB
mainbus0 (root)
ACPI Error (tbxfroot-0308): A valid RSDP was not found [20080321]
ACPI: unable to initialize ACPI tables: AE_NOT_FOUND
cpu0 at mainbus0: Intel 586-class, 233MHz, id 0x543
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7100 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x7113 (rev. 0x01)
piixpm0: 24-bit timer
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 15 function 0: vendor 0x102b product 0x0520 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ne2 at pci0 dev 16 function 0: Realtek 8029 Ethernet
ne2: Ethernet address 00:40:05:6b:f9:b3
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne2: interrupting at irq 5
fpa0 at pci0 dev 17 function 0uvm_fault(0xc0a1bc80, 0xc6436000, 2) -> 0xe
fatal page fault in supervisor mode
trap type 6 code b eip c0520603 cs 8 eflags 10246 cr2 c6436000 ilevel 8
kernel: supervisor trap page fault, code=0
Stopped in pid 0.1 (system) at  netbsd:pdq_stop+0x2d3:  movw    $0,0(%eax)
db{0}>



Using the no ACPI option
------------------------

booting cd0a:netbsd (howto 0x20000000)
8874208+405940+538728 [457360+443789]=0xa3af20
Loading cd9660
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.8 (GENERIC) #0: Fri Mar 13 21:22:48 EST 2009
        ray%tst.jkmrc.uq.edu.au@localhost:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 65148 KB
avail memory = 53396 KB
mainbus0 (root)
cpu0 at mainbus0: Intel 586-class, 233MHz, id 0x543
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7100 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x7113 (rev. 0x01)
piixpm0: 24-bit timer
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 15 function 0: vendor 0x102b product 0x0520 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ne2 at pci0 dev 16 function 0: Realtek 8029 Ethernet
ne2: Ethernet address 00:40:05:6b:f9:b3
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne2: interrupting at irq 5
fpa0 at pci0 dev 17 function 0uvm_fault(0xc0a1bc80, 0xc6434000, 2) -> 0xe
fatal page fault in supervisor mode
trap type 6 code b eip c0520603 cs 8 eflags 10246 cr2 c6434000 ilevel 8
kernel: supervisor trap page fault, code=0
Stopped in pid 0.1 (system) at  netbsd:pdq_stop+0x2d3:  movw    $0,0(%eax)
db{0}> reboot
ACPI Error (hwacpi-0156): No SMI_CMD in FADT, mode transition failed [20080321]
ACPI Error (evxfevnt-0221): Could not exit ACPI mode to legacy mode [20080321]

The operating system has halted.
Please press any key to reboot.

rebooting...


Using no ACPI, no SMP
---------------------

booting cd0a:netbsd (howto 0x30000000)
8874208+405940+538728 [457360+443789]=0xa3af20
Loading cd9660
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.8 (GENERIC) #0: Fri Mar 13 21:22:48 EST 2009
        ray%tst.jkmrc.uq.edu.au@localhost:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 65148 KB
avail memory = 53396 KB
mainbus0 (root)
cpu0 at mainbus0: Intel 586-class, 233MHz, id 0x543
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7100 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x7113 (rev. 0x01)
piixpm0: 24-bit timer
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 15 function 0: vendor 0x102b product 0x0520 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ne2 at pci0 dev 16 function 0: Realtek 8029 Ethernet
ne2: Ethernet address 00:40:05:6b:f9:b3
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne2: interrupting at irq 5
fpa0 at pci0 dev 17 function 0uvm_fault(0xc0a1bc80, 0xc6434000, 2) -> 0xe
fatal page fault in supervisor mode
trap type 6 code b eip c0520603 cs 8 eflags 10246 cr2 c6434000 ilevel 8
kernel: supervisor trap page fault, code=0
Stopped in pid 0.1 (system) at  netbsd:pdq_stop+0x2d3:  movw    $0,0(%eax)
db{0}>


Home | Main Index | Thread Index | Old Index