NetBSD/hp300 7.0_RC1

[Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>]

NetBSD 7.0_RC1 has been announced:
 http://blog.netbsd.org/tnf/entry/netbsd_7_0_rc1_binaries

and at least upgrade install to NetBSD/hp300 7.0_RC1 from 6.x
just works on my HP9000/425e:

 https://twitter.com/tsutsuii/status/612556773778534400/photo/1
 https://twitter.com/tsutsuii/status/612632222424657920/photo/1

 http://dmesgd.nycbug.org/index.cgi?action=dmesgd&do=view&id=2748

---
bootinfo found at 0xfd002000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (GENERIC.201506190427Z)
HP 9000/425e (25MHz MC68040 CPU+MMU+FPU, 4k on-chip physical I/D caches)
total memory = 49140 KB
avail memory = 43708 KB
kern.module.path=/stand/hp300/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
intio0 at mainbus0
rtc at intio0 not configured
frodo0 at intio0 addr 0x41c000 ipl 5
dnkbd0 at frodo0 offset 0x0: no keyboard
com1 at frodo0 offset 0x20: ns8250 or ns16450, no fifo
com2 at frodo0 offset 0x40: ns8250 or ns16450, no fifo
com3 at frodo0 offset 0x60: ns8250 or ns16450, no fifo
mcclock0 at frodo0 offset 0x80: mc146818 compatible time-of-day clock
hil0 at intio0 addr 0x428000 ipl 1
dma0 at intio0 addr 0x500000 ipl 1: 98620C, 2 channels, 32-bit DMA
dio0 at mainbus0
arcofi0 at dio0 scode 8 ipl 6
audio0 at arcofi0: half duplex, playback, capture
internal parallel at dio0 scode 12 ipl 3 not configured
spc0 at dio0 scode 14 ipl 4: 98265A SCSI, 32-bit DMA, SCSI ID 7
scsibus0 at spc0: 8 targets, 8 luns per target
le0 at dio0 scode 21 ipl 5: address xx:xx:xx:xx:xx:xx
le0: 8 receive buffers, 2 transmit buffers
sgc0 at mainbus0
sti0 at sgc0 slot 0: rev 8.02;75, ID 0x27134C9F40A00499
sti0: EVRX, 2048x1024 frame buffer, 1280x1024x8 display
sti0: 10x20 font type 1, 40 bpc, charset 0-255
wsdisplay0 at sti0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mc6840" frequency 250000 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
hilkbd0 at hil0 code 1: 109-key keyboard, layout 2
wskbd0 at hilkbd0 mux 1
wskbd0: connecting to wsdisplay0
hilms0 at hil0 code 2: Mouse, 2 axes, 3 buttons
wsmouse0 at hilms0 mux 0
sd0 at scsibus0 target 0 lun 0: <MELCO, DSC-G, 1.06> disk fixed
sd0: 30533 MB, 62037 cyl, 16 head, 63 sec, 512 bytes/sect x 62533296 sectors
sd0: async, 8-bit transfers
Kernelized RAIDframe activated
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

---
Izumi Tsutsui