Re: 5.0_RC2 restorecd

[Brian <brian-list%comcast.net@localhost>]

On Feb 28, 2009, at 1:48 AM, Izumi Tsutsui wrote:

> I've put 5.0_RC2/200902260000Z based NetBSD/cobalt restorecd:
> ftp://ftp.NetBSD.org/pub/NetBSD/arch/cobalt/restore-cd/5.0_RC2/
>
> - etc/ttys files have been changed to enable tty00 and ttyZ0
>  rather than "console" device which could cause a hangup on 2700
>  as reported from Wolfgang Solfrank

did this hit console access though on Qube2s?

I am working with a new-to-me Qube2, I put this Feb 28 restore CD on  
it via a vmware load of the iso.  so I could not monitor the instal,  
but It seems to work fine, except....

I can't get console to stay with me past:

Decompressing \ done.
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue Dec 15 04:11:42 PST 1998

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................16M
 6.Bank 1:.................................16M
 7.Bank 2:.................................0M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing  done
Decompressing \ done.
(nothing more).

I seem to need console as the device comes up with a hostname of  
q-160.netbsd.org (not that big a deal) and won't let me in via telnet  
or ssh (that's more of a deal).

After setting the IP from the LCD panel:

PING 192.168.0.26 (192.168.0.26): 56 data bytes
64 bytes from 192.168.0.26: icmp_seq=0 ttl=64 time=5.117 ms
64 bytes from 192.168.0.26: icmp_seq=1 ttl=64 time=3.822 ms
^C
--- 192.168.0.26 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 3.822/4.470/5.117/0.647 ms
Macintosh:~b$ telnet root%192.168.0.26@localhost
root%192.168.0.26@localhost: nodename nor servname provided, or not known
Macintosh:~ b$ ssh root%192.168.0.26@localhost
ssh: connect to host 192.168.0.26 port 22: Connection refused

I will reinstall I think from the earlier RC and make any edits; pull  
down the new kernel sources from there.

Please do let me know if I am missing something, this would not be the  
first time---

B