RE: Firewire/USB Card for Qube 2

[Sevan / Venture37 <venture37%hotmail.com@localhost>]

>> I was going to get myself one of those PCI combo cards to *finally*  
>> hook up some external drives to my Qube2. The one I have in mind  
>> right now:
>> 
>>    http://tinyurl.com/6c2oz6
>> 
>> It's based on VIA controllers, VT6306 for Firewire-400 and VT6214 for  
>> USB 2.0, and I've seen a bunch of dmesg dumps around that indicate  
>> these are supported by NetBSD.
> 
> At least VT8237 (actually VT6212L) USB seems to work on my Qube2700.
> (though not heavily tested)
> VT6306 Firewire is also probed, but I don't have any devices to test it.
> 
> Note it looks my card (combo with USB, Firewire and Gig-Ethernet)
> consumes too much power and it won't work with an internal IDE disk.
> (my qube gets reset right after the devices are probed or initialized)
> 
> Furthermore, GENERIC doesn't have those devices so you have to
> compile your own custom kernel.

I've been using a Ali chipset usb/firewire combo card in mine, but as you say 
GENERIC doesn't have support for usb/firewire devices, mine is still a work in 
progress, I need to get the prolific usb>rs232 support working, there is no 
device entry in /dev & MAKEDEV claimes that ucom & uplcom are unknown devices.

ck every 10.000 msec
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:fe:d5
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 9 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x02)
uhci0: can't map i/o space
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 
0x03)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 10 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 
0x03)
ohci1: interrupting at irq 9
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 10 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 
0x03)
ohci2: interrupting at irq 9
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
Acer Labs M5239 USB 2.0 Host Controller (USB serial bus, interface 0x20, 
revision 0x01) at pci0 dev 10 function 3 not configured
fwohci0 at pci0 dev 10 function 4: Acer Labs product 0x5253 (rev. 0x00)
fwohci0: interrupting at irq 9
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:e6:39:00:00:06:09
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:01:06:0c
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mips3_cp0_counter" frequency 125000000 Hz quality 100
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
Kernelized RAIDframe activated
uplcom0 at uhub0 port 2
uplcom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ucom0 at uplcom0
wd0 at atabus0 drive 0: 
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 78532 MB, 159557 cyl, 16 head, 63 sec, 512 bytes/sect x 160834367 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

_________________________________________________________________

All new Live Search at Live.com

http://clk.atdmt.com/UKM/go/msnnkmgl0010000006ukm/direct/01/