Re: NetBSD 10.1 on Hades

[Artur <artik-wroc%o2.pl@localhost>]

# dmesg -t

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.1 (HADES) #0: Mon Dec 16 13:08:11 UTC 2024
	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/atari/compile/HADES
Atari Hades (MC68060 rev.1 CPU/MMU/FPU)
total memory = 192 MB
avail memory = 185 MB
timecounter: Timecounters tick every 15.625 msec
mainbus0 (root)
clock0 at mainbus0: system hz 64 timer-A divisor 200/192
timecounter: Timecounter "clock" frequency 12288 Hz quality 100
grfbus0 at mainbus0
kbd0 at mainbus0
fdc0 at mainbus0: no fifo
hdfd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
ser0 at mainbus0: modem1 on 68901 MFP1 USART
zs0 at mainbus0: serial2 on channel a and modem2 on channel b
ncrscsi0 at mainbus0
scsibus0 at ncrscsi0 channel 0: 8 targets, 8 luns per target
nvr0 at mainbus0
lp0 at mainbus0
wdc0 at mainbus0
atabus0 at wdc0 channel 0
isab0 at mainbus0
isa0 at isab0
ne0 at isa0 port 0x300-0x31f irq 5
ne0: NE2000 (RTL8019) Ethernet
ne0: Ethernet address xx:xx:xx:xx:xx:xx
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x90] auto
pcib0 at mainbus0
pci0 at pcib0
pci0: i/o space, memory space enabled
vendor 10ec product 8029 (ethernet network) at pci0 dev 1 function 0 not 
configured
vendor 1274 product 1371 (audio multimedia, revision 0x08) at pci0 dev 2 
function 0 not configured
vendor 1002 product 4758 (VGA display, revision 0x03) at pci0 dev 3 
function 0 not configured
avmebus0 at mainbus0
vme0 at avmebus0
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0
wd0: <SFCF2048H1BO2TO-I-M0-543-ALU>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 1953 MB, 3970 cyl, 16 head, 63 sec, 512 bytes/sect x 4001760 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1
wd1: <SanDisk SDCFH2-002G>
wd1: drive supports 4-sector PIO transfers, LBA addressing
wd1: 1953 MB, 3970 cyl, 16 head, 63 sec, 512 bytes/sect x 4001760 sectors
wd1: drive supports PIO mode 4, DMA mode 2
probe(ncrscsi0:0:0:0): Does not support linked commands
cd0 at scsibus0 target 0 lun 0: <PIONEER, DVD-ROM DVD-303R, 1.09> cdrom 
removable
4 views configured
1 mouse configured
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/atari/10.1/modules
entropy: best effort


Starting root file system check:
/dev/rwd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/wd0b
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
rndctl: no entropy in seed
Waiting for entropy...done
Setting tty flags.
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
swapctl: setting dump device to /dev/wd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Starting postfix.
postfix: warning: valid_hostname: empty hostname
postfix: fatal: unable to use my own hostname
Apr 14 20:15:59  postfix[686]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
    /etc/rc.d/postfix
See /var/run/rc.log for more information.