Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: BPI-P2 zero questions




> On May 30, 2019, at 1:26 PM, Dima Veselov <kab00m%lich.phys.spbu.ru@localhost> wrote:
> 
> Greetings,
> 
> I own BananaPI P2 Zero board and wish to run NetBSD on it.
> BPI-P2 Zero is BPI-M2 Zero but have eMMC and PoE support.
> According to Allwinner NetBSD evbarm wiki this board may
> be supported like Orange PI Zero (the only board having
> same H2+ CPU).

The BPI-M2 Zero also has an H2+ SoC.  I would expect that the BPI-M2 Zero u-boot and DTB would be what you want to use for this.

> 
> I have tried recipes from wiki: using armv7.img + u-boot.
> It works but with different results on different u-boot
> images.
> 
> OrangePi Zero u-boot make best result - it boots,
> try to load PXE, succesfully loading dtb file from tftp, but
> loading kernel fails with Bad Data CRC on kernel load
> or with Kernel symbol table missing! on NetBSD stage-2
> loader.

Loading kernel with "Kernel symbol table missing!" Is actually kind of normal, so don't sweat that one.

> Orange Pi Plus 2E also works, but seem to have problems
> with network, stage 2 also fail.
> 
> BPI u-boot do not work at all.

Which BPI u-boot image did you use?

> If someone is interested to help me get it working - I have
> full logs about this boots and can experiment with the board.

Can you send me logs from your "most successful" run?

-- thorpej



Home | Main Index | Thread Index | Old Index