Re: CURRENT broken on Raspberry Pi 2?

[Nick Hudson <nick.hudson%gmx.co.uk@localhost>]

On 10/02/2019 23:07, Herbert J. Skuhra wrote:
> On Sun, Feb 10, 2019 at 09:39:54PM -0000, Michael van Elst wrote:
> > herbert%gojira.at@localhost ("Herbert J. Skuhra") writes:
> >
> > > > > I am trying upgrade my Raspberry Pi 2 from 8.99.30 to 8.99.34 (earmv6hf)
> > > > > but the new kernel does not boot. All I see on serial console is:
> > > > >
> > > > > [   1.0000000] NetBSD/evbarm (fdt) booting ...
> > > > > [   1.0000000] [ Kernel symbol table missing! ]
> >
> >
> > > | Modified Files:
> > > |         src/sys/dev/usb: if_mue.c if_muereg.h if_muevar.h
> >
> >
> > RPI2 doesn't use mue. So it's probably something else.
>
> What I did:
>
> % cvs -q update -D "2019-02-03 13:02:00 GMT" -PdAC
> % ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U tools
> % ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U kernel=RPI2
>
> Transfered "../obj/sys/arch/evbarm/compile/RPI2/netbsd.img" to my RPI2
> and copied the file to /boot/kernel7.img. RPI2 boots.
>
> % cvs -q update -D "2019-02-03 13:12:00 GMT" -PdAC
> P sys/dev/usb/if_mue.c
> P sys/dev/usb/if_muereg.h
> P sys/dev/usb/if_muevar.h
> % ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U tools
> % ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U kernel=RPI2
>
> Transfered "../obj/sys/arch/evbarm/compile/RPI2/netbsd.img" to my RPI2
> and copied the file to /boot/kernel7.img. RPI2 does not boot.
>
> "git bisect" also showed 839ba011cca6e199499bcf85a7beddbfb5369dc6 as the
> first bad commit.

Did the kernel grow beyond 8MB?

Thanks,
Nick