Re: CURRENT broken on Raspberry Pi 2?

["Herbert J. Skuhra" <herbert%gojira.at@localhost>]

On Sun, Feb 10, 2019 at 09:39:54PM -0000, Michael van Elst wrote:
> herbert%gojira.at@localhost ("Herbert J. Skuhra") writes:
> 
> >> > I am trying upgrade my Raspberry Pi 2 from 8.99.30 to 8.99.34 (earmv6hf)
> >> > but the new kernel does not boot. All I see on serial console is:
> >> > 
> >> > [   1.0000000] NetBSD/evbarm (fdt) booting ...
> >> > [   1.0000000] [ Kernel symbol table missing! ]
> 
> 
> >| Modified Files:
> >|         src/sys/dev/usb: if_mue.c if_muereg.h if_muevar.h
> 
> 
> RPI2 doesn't use mue. So it's probably something else.

What I did:

% cvs -q update -D "2019-02-03 13:02:00 GMT" -PdAC
% ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U tools
% ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U kernel=RPI2

Transfered "../obj/sys/arch/evbarm/compile/RPI2/netbsd.img" to my RPI2
and copied the file to /boot/kernel7.img. RPI2 boots.

% cvs -q update -D "2019-02-03 13:12:00 GMT" -PdAC 
P sys/dev/usb/if_mue.c
P sys/dev/usb/if_muereg.h
P sys/dev/usb/if_muevar.h
% ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U tools
% ./build.sh -j2 -m evbarm -a earmv6hf -O ../obj -T ../tools -U kernel=RPI2

Transfered "../obj/sys/arch/evbarm/compile/RPI2/netbsd.img" to my RPI2
and copied the file to /boot/kernel7.img. RPI2 does not boot.

"git bisect" also showed 839ba011cca6e199499bcf85a7beddbfb5369dc6 as the
first bad commit.

-- 
Herbert