Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: 8.0_RC1 Raspberry Pi 2 doesn't occupy full HDMI screen



On Thu, Jun 21, 2018 at 10:59:48AM -0400, Alan Corey wrote:
> Sounds like you to need to toggle the overscan, not sure how in
> netbsd.  It's a very low level option, in Raspbian it's in
> /boot/config.txt.  It's lower level than even the OS, may be peculiar
> to the Pi.  There are 20 or so very useful options that go in
> config.txt, it's worth looking at the official page:
> https://www.raspberrypi.org/documentation/configuration/config-txt/README.md

Yes, I have used raspbian on the same device and it worked fine.

On NetBSD I see a possibly relevant file in /boot/cmdline.txt, but do not
find much documentation on how to tinker with it.

Mayuresh


Home | Main Index | Thread Index | Old Index