[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: 2015-03-29-netbsd-odroid_c1.img.gz (Re: NetBSD on ODROID-C1
Great news! I will try to find a 100Mbps switch and see if I can reproduce
No Amlogic SPI, I2C, or GPIO controller drivers have been written yet.
Should be pretty easy to do, but I don't have hardware to test them.
On Mon, 30 Mar 2015, Jun Ebihara wrote:
From: Jared McNeill <jmcneill%invisible.ca@localhost>
Subject: Re: 2015-03-29-netbsd-odroid_c1.img.gz (Re: NetBSD on ODROID-C1
Date: Sun, 29 Mar 2015 12:22:36 -0300 (ADT)
Does "ifconfig awge0" show the correct media info? I only ever tried
1Gbps autoneg. Maybe rgephy needs some more help.
Thanx for your advice.
So I dig GbE Hub and connect same network
and get v4/v6 address!
awge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (1000baseT full-duplex)
inet6 fe80::fabb:2fc7:e52a:353%awge0 prefixlen 64 scopeid 0x1
inet6 1234:c800:3406:501:12c1:94e9:4967:ffdb prefixlen 64
inet 192.168.0.28 netmask 0xffffff00 broadcast 192.168.0.255
On Sun, 29 Mar 2015, Jun Ebihara wrote:
I've put ODROID-C1 2GB initial test snapshot image to
1. dd to 2GB microSD
2. connect HDMI,Keyboard,mouse,Network
3. connect power on and NetBSD boot messeage on HDMI display
Sample build script:
- I can't get no DHCP address.
and can get with GbE.
- mikutter start failed.
- mlterm-fb display |||||||
- icewm start menu seems strange.
- what about the SPI/I2C bus and GPIOs? (from fabiodive)
Main Index |
Thread Index |