NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: netbsd-9 ip6 kernel log messages



On 2019-08-30 03:22, Robert Elz wrote:

Thanks for the detailed analysis!

Since you have v4 statically configured, I will guess that you're
not starting dhcpcd

Correct.

- if that's not running, the kernel is managing
v6 autoconfig for you.

Your initial message said "/var/log/messages gets spammed with..."
from which I have been assuming not just one message, but many.

From dmesg(8):

[...]
[ 97324.649076] in6_setscope: can't set scope for not loopback interface vioif0 and loopback address ::1 [ 97324.649076] in6_setscope: can't set scope for not loopback interface vioif0 and loopback address ::1 [ 97326.651757] in6_setscope: can't set scope for not loopback interface vioif0 and loopback address ::1 [ 97326.651757] in6_setscope: can't set scope for not loopback interface vioif0 and loopback address ::1 [ 97330.657141] in6_setscope: can't set scope for not loopback interface vioif0 and loopback address ::1 [ 97330.657141] in6_setscope: can't set scope for not loopback interface vioif0 and loopback address ::1
[...]

Assuming the time is in seconds, the messages come in pairs, in consistent distances of 2, 4 and 4 seconds.

Can you deduce from the timestamps the appoximate frequency, and
perhape correlate that with the frequency of RA messages from whatever
v6 enabled router is on the same (bridged, I am guessing from voif0)
network link?

I tcpdump(8)ed ~1000 icmp6 packets, and there wasn't a single router advertisement; they were all "neighbor solicitation"s.

Cheerio,
hauke

--
     The ASCII Ribbon Campaign                    Hauke Fath
()     No HTML/RTF in email	        Institut für Nachrichtentechnik
/\     No Word docs in email                     TU Darmstadt
     Respect for open standards              Ruf +49-6151-16-21344


Home | Main Index | Thread Index | Old Index