Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to boot on J3455-ITX board (ASRock)

["wgstuken%grimme-reitenspezial.de@localhost via gnats" <gnats-admin%NetBSD.org@localhost>]

The following reply was made to PR port-amd64/58982; it has been noted by GNATS.

From: wgstuken%grimme-reitenspezial.de@localhost
To: Andrius V <vezhlys%gmail.com@localhost>
Cc: gnats-bugs%netbsd.org@localhost
Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to
 boot on J3455-ITX board (ASRock)
Date: Tue, 14 Jan 2025 08:29:53 +0100

 Hi,
 
 my current plan is to setup an unused system with 10.1 because I have 
 always build the system from the sources.
 I have some patches inside that has not reached the main source, but 
 some of then I need.
 So I have to integrate them again. (Some kernel related, some 
 user-level)
 
 But I cannot give an eta for this atm. - lot of 'normal' work.
 I try to do this in parallel now to get forward with this.
 
 
 W. Stukenbrock
 
 Am 13.01.2025 15:30, schrieb Andrius V:
 > On Mon, Jan 13, 2025 at 12:01â?¯PM wgstuken%grimme-reitenspezial.de@localhost via
 > gnats <gnats-admin%netbsd.org@localhost> wrote:
 >> 
 >> The following reply was made to PR port-amd64/58982; it has been noted 
 >> by GNATS.
 >> 
 >> From: wgstuken%grimme-reitenspezial.de@localhost
 >> To: gnats-bugs%netbsd.org@localhost
 >> Cc: port-amd64-maintainer%netbsd.org@localhost, gnats-admin%netbsd.org@localhost,
 >>  netbsd-bugs%netbsd.org@localhost
 >> Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) 
 >> failed to
 >>  boot on J3455-ITX board (ASRock)
 >> Date: Mon, 13 Jan 2025 08:31:35 +0100
 >> 
 >>  Hi,
 > Hi,
 >> 
 >>  I had attached them .....
 > Sorry about that, maybe there were filtered out by mail server, not 
 > sure.
 > 
 >> 
 >>  now as inline copy again:
 >> 
 >>  output of cpuctl identify 0 ...
 >> 
 >>  cpu0: highest basic info 00000015
 >>  cpu0: highest extended info 80000008
 >>  cpu0: "Intel(R) Celeron(R) CPU J3455 @ 1.50GHz"
 >>  cpu0: Intel Atom (Goldmont) (686-class), 1497.60 MHz
 >>  cpu0: TSC freq CPUID 1497600000 Hz
 >>  cpu0: family 0x6 model 0x5c stepping 0xa (id 0x506ca)
 > ...
 >>  cpu family     : 6
 >>  model          : 92
 >>  model name     : Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
 >>  stepping       : 10
 > Thanks again. I can confirm that your CPU has a newer stepping 0xa
 > (10), thus a workaround is not applied. I will prepare the patch to
 > remove the stepping check.
 > It will be possible to test either by building kernel from current
 > source or taking current image from
 > https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/ around a day
 > after commit.
 > I will inform separately and let's see how it boots afterwards.
 > 
 > Regards,
 > Andrius V