Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to boot on J3455-ITX board (ASRock)

["wgstuken%grimme-reitenspezial.de@localhost via gnats" <gnats-admin%NetBSD.org@localhost>]

The following reply was made to PR port-amd64/58982; it has been noted by GNATS.

From: wgstuken%grimme-reitenspezial.de@localhost
To: Andrius V <vezhlys%gmail.com@localhost>
Cc: gnats-bugs%netbsd.org@localhost
Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to
 boot on J3455-ITX board (ASRock)
Date: Thu, 16 Jan 2025 10:30:47 +0100

 Hi again - update
 
 I have setup old Celeron (32-Bit only) system in the meanwhile.
 Loaded complete source and had a try with 'make release'
 It build for long time on this slow CPU and then run into error during 
 setup of ramdisk-big
 sysinstmsgs.fr not found
 /usr/src/deistrib/i396/i386/ramdisks/ramdisk-big/sysinstmsgs.fr
 
 retry of 'make release' (without clearing everything) starts relinking 
 lot of things from TOOL part - I forgot to disable the tools-build.
 Inside compilers also lot of object files are rebuild .... (looks like 
 complete gcc build is done again)
 So it will take some time until I come to the point where it was failing 
 before again ...
 Will send update if it runs into same error or not.
 
 I have not started amd64 build on this system till now - so may need 
 some more days to get to the point where I can test the 'fix'.
 
 sorry
 
 W. Stukenbrock
 
 Am 14.01.2025 08:29, schrieb wgstuken%grimme-reitenspezial.de@localhost:
 > Hi,
 > 
 > my current plan is to setup an unused system with 10.1 because I have
 > always build the system from the sources.
 > I have some patches inside that has not reached the main source, but
 > some of then I need.
 > So I have to integrate them again. (Some kernel related, some 
 > user-level)
 > 
 > But I cannot give an eta for this atm. - lot of 'normal' work.
 > I try to do this in parallel now to get forward with this.
 > 
 > 
 > W. Stukenbrock
 > 
 > Am 13.01.2025 15:30, schrieb Andrius V:
 >> On Mon, Jan 13, 2025 at 12:01â?¯PM wgstuken%grimme-reitenspezial.de@localhost via
 >> gnats <gnats-admin%netbsd.org@localhost> wrote:
 >>> 
 >>> The following reply was made to PR port-amd64/58982; it has been 
 >>> noted by GNATS.
 >>> 
 >>> From: wgstuken%grimme-reitenspezial.de@localhost
 >>> To: gnats-bugs%netbsd.org@localhost
 >>> Cc: port-amd64-maintainer%netbsd.org@localhost, gnats-admin%netbsd.org@localhost,
 >>>  netbsd-bugs%netbsd.org@localhost
 >>> Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) 
 >>> failed to
 >>>  boot on J3455-ITX board (ASRock)
 >>> Date: Mon, 13 Jan 2025 08:31:35 +0100
 >>> 
 >>>  Hi,
 >> Hi,
 >>> 
 >>>  I had attached them .....
 >> Sorry about that, maybe there were filtered out by mail server, not 
 >> sure.
 >> 
 >>> 
 >>>  now as inline copy again:
 >>> 
 >>>  output of cpuctl identify 0 ...
 >>> 
 >>>  cpu0: highest basic info 00000015
 >>>  cpu0: highest extended info 80000008
 >>>  cpu0: "Intel(R) Celeron(R) CPU J3455 @ 1.50GHz"
 >>>  cpu0: Intel Atom (Goldmont) (686-class), 1497.60 MHz
 >>>  cpu0: TSC freq CPUID 1497600000 Hz
 >>>  cpu0: family 0x6 model 0x5c stepping 0xa (id 0x506ca)
 >> ...
 >>>  cpu family     : 6
 >>>  model          : 92
 >>>  model name     : Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
 >>>  stepping       : 10
 >> Thanks again. I can confirm that your CPU has a newer stepping 0xa
 >> (10), thus a workaround is not applied. I will prepare the patch to
 >> remove the stepping check.
 >> It will be possible to test either by building kernel from current
 >> source or taking current image from
 >> https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/ around a day
 >> after commit.
 >> I will inform separately and let's see how it boots afterwards.
 >> 
 >> Regards,
 >> Andrius V