NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
RE: kern/57696: NetBSD-10.0_RC1-amd64-install.img.gz kernel panics at reboot or shutdown on mid 2010 21.5" iMac
The following reply was made to PR kern/57696; it has been noted by GNATS.
From: Josh Moyer <JMoyer%nodomain.net@localhost>
To: Taylor R Campbell <riastradh%NetBSD.org@localhost>
Cc: "gnats-bugs%NetBSD.org@localhost" <gnats-bugs%NetBSD.org@localhost>, "netbsd-bugs%NetBSD.org@localhost"
<netbsd-bugs%NetBSD.org@localhost>, "dyoung%NetBSD.org@localhost" <dyoung%NetBSD.org@localhost>
Subject: RE: kern/57696: NetBSD-10.0_RC1-amd64-install.img.gz kernel panics at
reboot or shutdown on mid 2010 21.5" iMac
Date: Mon, 13 Nov 2023 15:15:53 +0000
Thanks for the reply. I actually saw this repro (and got a kernel dump) wh=
en booted of the hard disk, which invalidates my hypothesis that it was rel=
ated to the SD card. dmesg from that (although without -v -x):
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 200=
3,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2=
013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2=
023
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All right=
s reserved.
[ 1.000000] NetBSD 10.0_RC1 (GENERIC) #0: Sun Nov 5 18:30:08 UTC 2023
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile=
/GENERIC
[ 1.000000] total memory =3D 4022 MB
[ 1.000000] avail memory =3D 3856 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] [ 383.000000] radeon* disabled
[ 1.000000] RTC BIOS diagnostic error 0x76<ROM_cksum,config_unit,memory=
_size,invalid_time>
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quali=
ty 100
[ 1.000004] efi: systbl at pa bf75ef18
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000BF70E014 000024 (v02 APPLE )
[ 1.000004] ACPI: XSDT 0x00000000BF70E1C0 00007C (v01 APPLE Apple00 0=
000F000 01000013)
[ 1.000004] ACPI: FACP 0x00000000BF70B000 0000F4 (v04 APPLE Apple00 0=
000F000 Loki 0000005F)
[ 1.000004] ACPI: DSDT 0x00000000BF6FF000 00571C (v01 APPLE iMac 0=
0110001 INTL 20061109)
[ 1.000004] ACPI: FACS 0x00000000BF679000 000040
[ 1.000004] ACPI: ASF! 0x00000000BF70D000 0000A5 (v32 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: HPET 0x00000000BF70A000 000038 (v01 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: APIC 0x00000000BF709000 0000BC (v01 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: APIC 0x00000000BF708000 0000BC (v02 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: SBST 0x00000000BF706000 000030 (v01 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: ECDT 0x00000000BF705000 000053 (v01 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: SSDT 0x00000000BF6FC000 0001DA (v01 APPLE SataAhci 0=
0001000 INTL 20061109)
[ 1.000004] ACPI: SSDT 0x00000000BF6FA000 000518 (v01 APPLE UsbNoRmh 0=
0001000 INTL 20061109)
[ 1.000004] ACPI: SSDT 0x00000000BF6F7000 000A10 (v01 PmRef CpuPm 0=
0003000 INTL 20061109)
[ 1.000004] ACPI: MCFG 0x00000000BF707000 00003C (v01 APPLE Apple00 0=
0000001 Loki 0000005F)
[ 1.000004] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24=
pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, id 0=
x20655
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 1
[ 1.000004] cpu1: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, id 0=
x20655
[ 1.000004] cpu1: node 0, package 0, core 0, smt 1
[ 1.000004] cpu2 at mainbus0 apid 4
[ 1.000004] cpu2: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, id 0=
x20655
[ 1.000004] cpu2: node 0, package 0, core 2, smt 0
[ 1.000004] cpu3 at mainbus0 apid 5
[ 1.000004] cpu3: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, id 0=
x20655
[ 1.000004] cpu3: node 0, package 0, core 2, smt 1
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <APPLE , Apple00,0000f000>, AslId < =
,01000013>
[ 1.000004] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
[ 1.000004] acpi0: MCFG: segment 0, bus 0-6, address 0x00000000e0000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFF1BB2799A008 0004FF (v01 PmRef Cpu0Ist 0=
0003000 INTL 20061109)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFF1BB2799A808 0006E5 (v01 PmRef Cpu0Cst 0=
0003001 INTL 20061109)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFF1BB5A15CC08 0003A4 (v01 PmRef ApIst 0=
0003000 INTL 20061109)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFFF1BB27957248 000119 (v01 PmRef ApCst 0=
0003000 INTL 20061109)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz q=
uality 1000
[ 1.036207] hpet0 at acpi0: high precision event timer (mem 0xfed00000-=
0xfed00400)
[ 1.036207] timecounter: Timecounter "hpet0" frequency 14318180 Hz qual=
ity 2000
[ 1.036831] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
[ 1.036831] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.036831] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Dev=
ice
[ 1.036831] acpiout0: brightness levels: [0,7,13,20,27,33,40,47,50,53,6=
0,67,73,80,87,93,100]
[ 1.036831] acpivga0: connected output devices:
[ 1.036831] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
[ 1.036831] FWHD (INT0800) at acpi0 not configured
[ 1.036831] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
[ 1.036831] SMC (APP0001) at acpi0 not configured
[ 1.036831] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.036831] PNLF (APP0002) at acpi0 not configured
[ 1.036831] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.036831] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.036831] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.036831] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr=
/inv ok
[ 1.036831] pchb0 at pci0 dev 0 function 0: Intel Iron Lake Host Bridge=
(rev. 0x18)
[ 1.036831] agp0 at pchb0autoconfiguration error: : can't find internal=
VGA config space
[ 1.036831] ppb0 at pci0 dev 1 function 0: Intel Core PCIe Root Port (r=
ev. 0x18)
[ 1.036831] ppb0: PCI Express capability version 2 <Root Port of PCI-E =
Root Complex> x16 @ 5.0GT/s
[ 1.036831] pci1 at ppb0 bus 1
[ 1.036831] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.036831] genfb0 at pci1 dev 0 function 0: ATI Technologies Mobility =
Radeon HD 4670 (rev. 0x00)
[ 1.036831] genfb0: framebuffer at 0xc0010000, size 1920x1080, depth 32=
, stride 7680
[ 1.036831] genfb0: shadow framebuffer enabled, size 8100 KB
[ 1.036831] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emul=
ation)
[ 1.036831] wsmux1: connecting to wsdisplay0
[ 1.036831] drm at genfb0 not configured
[ 1.036831] hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
[ 1.036831] hdaudio0: interrupting at msi0 vec 0
[ 1.036831] hdaudio0: HDA ver. 1.0, OSS 1, ISS 0, BSS 0, SDO 1, 64-bit
[ 1.036831] hdafg0 at hdaudio0: ATI R6xx HDMI
[ 1.036831] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.036831] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.036831] audio0 at hdafg0: playback
[ 1.036831] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) fo=
r playback
[ 1.036831] spkr0 at audio0: PC Speaker (synthesized)
[ 1.036831] wsbell at spkr0 not configured
[ 1.036831] uhci0 at pci0 dev 26 function 0: Intel 3400 USB (rev. 0x06)
[ 1.036831] cannot set up pci_intr_handle_t
[ 1.036831] uhci0: autoconfiguration error: couldn't map interrupt
[ 1.036831] ehci0 at pci0 dev 26 function 7: Intel 3400 USB ECHI (rev. =
0x06)
[ 1.036831] ehci0: 64-bit DMA
[ 1.036831] ehci0: interrupting at ioapic0 pin 21
[ 1.036831] ehci0: EHCI version 1.0
[ 1.036831] ehci0: wrong number of companions (3 !=3D 0)
[ 1.036831] ehci0: Using DMA subregion for control data structures
[ 1.036831] usb0 at ehci0: USB revision 2.0
[ 1.036831] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
[ 1.036831] hdaudio1: interrupting at msi1 vec 0
[ 1.036831] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.036831] hdafg1 at hdaudio1: vendor 1013 product 4206
[ 1.036831] hdafg1: ADC00 2ch: Mic In [Built-In]
[ 1.036831] hdafg1: ADC01 2ch: Line In [Jack]
[ 1.036831] hdafg1: DIG-In02 2ch: SPDIF In [Jack]
[ 1.036831] hdafg1: DAC03 4ch: Speaker [Built-In]
[ 1.036831] hdafg1: DAC04 2ch: HP Out [Jack]
[ 1.036831] hdafg1: DIG05 2ch: SPDIF Out [Jack]
[ 1.036831] hdafg1: 4ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192=
000Hz PCM16 PCM20 PCM24 PCM32 AC3
[ 1.036831] audio1 at hdafg1: playback, capture, full duplex, independe=
nt
[ 1.036831] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) fo=
r playback
[ 1.036831] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) fo=
r recording
[ 1.036831] spkr1 at audio1: PC Speaker (synthesized)
[ 1.036831] wsbell at spkr1 not configured
[ 1.036831] ppb1 at pci0 dev 28 function 0: Intel 3400 PCIe (rev. 0x06)
[ 1.036831] ppb1: PCI Express capability version 2 <Root Port of PCI-E =
Root Complex> x1 @ 2.5GT/s
[ 1.036831] pci2 at ppb1 bus 2
[ 1.036831] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.036831] bge0 at pci2 dev 0 function 0: Broadcom BCM5764 Gigabit Eth=
ernet
[ 1.036831] bge0: interrupting at msi2 vec 0
[ 1.036831] bge0: HW config 00000015, 00004015, 00002830, 00000000 0000=
0000
[ 1.036831] bge0: ASIC BCM5784 B0 (0x5784100), Ethernet address c8:bc:c=
8:9e:bf:a2
[ 1.036831] bge0: setting short Tx thresholds
[ 1.036831] brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
[ 1.036831] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 10=
00baseT, 1000baseT-FDX, auto
[ 1.036831] ppb2 at pci0 dev 28 function 1: Intel 3400 PCIe (rev. 0x06)
[ 1.036831] ppb2: PCI Express capability version 2 <Root Port of PCI-E =
Root Complex> x1 @ 2.5GT/s
[ 1.036831] pci3 at ppb2 bus 3
[ 1.036831] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.036831] athn0 at pci3 dev 0 function 0: Atheros AR9280
[ 1.036831] athn0: rev 2 (2T2R), ROM rev 22, address c8:bc:c8:bf:a7:90
[ 1.036831] athn0: interrupting at ioapic0 pin 17
[ 1.036831] ppb3 at pci0 dev 28 function 2: Intel 3400 PCIe (rev. 0x06)
[ 1.036831] ppb3: PCI Express capability version 2 <Root Port of PCI-E =
Root Complex> x1 @ 2.5GT/s
[ 1.036831] pci4 at ppb3 bus 4
[ 1.036831] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.036831] ppb4 at pci4 dev 0 function 0: Texas Instruments product 82=
3e (rev. 0x01)
[ 1.036831] ppb4: PCI Express capability version 1 <PCI-E to PCI/PCI-X =
Bridge>
[ 1.036831] pci5 at ppb4 bus 5
[ 1.036831] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.036831] fwohci0 at pci5 dev 0 function 0: Texas Instruments product=
823f (rev. 0x01)
[ 1.036831] fwohci0: interrupting at ioapic0 pin 18
[ 1.036831] fwohci0: OHCI version 1.10 (ROM=3D0)
[ 1.036831] fwohci0: No. of Isochronous channels is 8.
[ 1.036831] fwohci0: EUI64 dc:2b:61:ff:fe:f2:ae:92
[ 1.036831] fwohci0: autoconfiguration error: invalid speed 7 (fixed to=
3).
[ 1.036831] fwohci0: Phy 1394a available S800, 3 ports.
[ 1.036831] fwohci0: Link S800, max_rec 4096 bytes.
[ 1.036831] ieee1394if0 at fwohci0: IEEE1394 bus
[ 1.036831] fwip0 at ieee1394if0: IP over IEEE1394
[ 1.036831] fwohci0: Initiate bus reset
[ 1.036831] fwohci0: Clear PME# now
[ 1.036831] uhci1 at pci0 dev 29 function 0: Intel 3400 USB (rev. 0x06)
[ 1.036831] cannot set up pci_intr_handle_t
[ 1.036831] uhci1: autoconfiguration error: couldn't map interrupt
[ 1.036831] ehci1 at pci0 dev 29 function 7: Intel 3400 USB EHCI (rev. =
0x06)
[ 1.036831] ehci1: 64-bit DMA
[ 1.036831] ehci1: interrupting at ioapic0 pin 23
[ 1.036831] ehci1: EHCI version 1.0
[ 1.036831] ehci1: wrong number of companions (4 !=3D 0)
[ 1.036831] ehci1: Using DMA subregion for control data structures
[ 1.036831] usb1 at ehci1: USB revision 2.0
[ 1.036831] ppb5 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridg=
e (rev. 0xa6)
[ 1.036831] pci6 at ppb5 bus 6
[ 1.036831] pci6: i/o space, memory space enabled
[ 1.036831] ichlpcib0 at pci0 dev 31 function 0: Intel P55 LPC Interfac=
e Bridge (rev. 0x06)
[ 1.036831] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz q=
uality 1000
[ 1.036831] ichlpcib0: 24-bit timer
[ 1.036831] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.036831] tco0: autoconfiguration error: TCO timer reboot disabled by=
hardware; hope SMBIOS properly handles it.
[ 1.036831] tco0: Min/Max interval 1/367 seconds
[ 1.036831] ahcisata0 at pci0 dev 31 function 2: Intel 3400 AHCI (rev. =
0x06)
[ 1.036831] ahcisata0: 64-bit DMA
[ 1.036831] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe72=
0ff45<EMS,PSC,SSC,PMD,ISS=3D0x2=3DGen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
[ 1.036831] ahcisata0: interrupting at msi3 vec 0
[ 1.036831] atabus0 at ahcisata0 channel 0
[ 1.036831] atabus1 at ahcisata0 channel 1
[ 1.036831] ichsmb0 at pci0 dev 31 function 3: Intel 3400 SMBus (rev. 0=
x06)
[ 1.036831] ichsmb0: interrupting at ioapic0 pin 20
[ 1.036831] iic0 at ichsmb0: I2C bus
[ 1.036831] Intel 3400 Thermal (miscellaneous DASP, revision 0x06) at p=
ci0 dev 31 function 6 not configured
[ 1.036831] isa0 at ichlpcib0
[ 1.036831] pcppi0 at isa0 port 0x61
[ 1.036831] spkr2 at pcppi0: PC Speaker
[ 1.036831] wsbell at spkr2 not configured
[ 1.036831] midi0 at pcppi0: PC speaker
[ 1.036831] sysbeep0 at pcppi0
[ 1.036831] attimer1: attached to pcppi0
[ 1.036831] pci7 at mainbus0 bus 255
[ 1.036831] pci7: i/o space, memory space enabled, rd/line, rd/mult, wr=
/inv ok
[ 1.036831] pchb1 at pci7 dev 0 function 0: Intel Core i5-600, i3-500 a=
nd Pentium 6000 QuickPath Generic Non-Core Register (rev. 0x05)
[ 1.036831] pchb2 at pci7 dev 0 function 1: Intel Core i5-600, i3-500 a=
nd Pentium 6000 QuickPath Generic System Address Decoder (rev. 0x05)
[ 1.036831] pchb3 at pci7 dev 2 function 0: Intel Core i5-600, i3-500 a=
nd Pentium 6000 QPI Link (rev. 0x05)
[ 1.036831] pchb4 at pci7 dev 2 function 1: Intel Core i5-600, i3-500 a=
nd Pentium 6000 QPI Physical (rev. 0x05)
[ 1.036831] pchb5 at pci7 dev 2 function 2: Intel Core i5-600, i3-500 a=
nd Pentium 6000 Reserved (rev. 0x05)
[ 1.036831] pchb6 at pci7 dev 2 function 3: Intel Core i5-600, i3-500 a=
nd Pentium 6000 Reserved (rev. 0x05)
[ 1.036831] acpicpu0 at cpu0: ACPI CPU
[ 1.036831] acpicpu0: C1: FFH, lat 3 us, pow 1000 mW
[ 1.036831] acpicpu0: C2: FFH, lat 245 us, pow 350 mW
[ 1.036831] acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 3059 MHz
[ 1.036831] acpicpu0: P1: FFH, lat 10 us, pow 33571 mW, 2926 MHz
[ 1.036831] acpicpu0: P2: FFH, lat 10 us, pow 32142 mW, 2793 MHz
[ 1.036831] acpicpu0: P3: FFH, lat 10 us, pow 30714 mW, 2660 MHz
[ 1.036831] acpicpu0: P4: FFH, lat 10 us, pow 29285 mW, 2527 MHz
[ 1.036831] acpicpu0: P5: FFH, lat 10 us, pow 27857 mW, 2394 MHz
[ 1.036831] acpicpu0: P6: FFH, lat 10 us, pow 26428 mW, 2261 MHz
[ 1.036831] acpicpu0: P7: FFH, lat 10 us, pow 25000 mW, 2128 MHz
[ 1.036831] acpicpu0: P8: FFH, lat 10 us, pow 23571 mW, 1995 MHz
[ 1.036831] acpicpu0: P9: FFH, lat 10 us, pow 22142 mW, 1862 MHz
[ 1.036831] acpicpu0: P10: FFH, lat 10 us, pow 20714 mW, 1729 MHz
[ 1.036831] acpicpu0: P11: FFH, lat 10 us, pow 19285 mW, 1596 MHz
[ 1.036831] acpicpu0: P12: FFH, lat 10 us, pow 17857 mW, 1463 MHz
[ 1.036831] acpicpu0: P13: FFH, lat 10 us, pow 16428 mW, 1330 MHz
[ 1.036831] acpicpu0: P14: FFH, lat 10 us, pow 15000 mW, 1197 MHz
[ 1.036831] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.036831] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.036831] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.036831] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.036831] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.036831] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.036831] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.036831] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.036831] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=3D=
105
[ 1.036831] acpicpu1 at cpu1: ACPI CPU
[ 1.036831] acpicpu2 at cpu2: ACPI CPU
[ 1.036831] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=3D=
105
[ 1.036831] acpicpu3 at cpu3: ACPI CPU
[ 1.036831] fwohci0: BUS reset
[ 1.036831] fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
[ 1.036831] ieee1394if0: 1 nodes, maxhop <=3D 0 cable IRM irm(0) (me)
[ 1.036831] ieee1394if0: bus manager 0
[ 1.036831] fwohci0: phy int
[ 1.036831] timecounter: Timecounter "clockinterrupt" frequency 100 Hz =
quality 0
[ 1.036831] timecounter: Timecounter "TSC" frequency 3059001000 Hz qual=
ity 3000
[ 1.459799] IPsec: Initialized Security Association Processing.
[ 1.477325] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), clas=
s 9/0, rev 2.00/1.00, addr 1
[ 1.477325] uhub0: 6 ports with 6 removable, self powered
[ 1.477325] uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), clas=
s 9/0, rev 2.00/1.00, addr 1
[ 1.477325] uhub1: 8 ports with 8 removable, self powered
[ 1.627325] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 1.627325] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 2.527324] uhub2 at uhub0 port 1: vendor 0424 (0x0424) product 2514 (0=
x2514), class 9/0, rev 2.00/0.03, addr 2
[ 2.527324] uhub2: multiple transaction translators
[ 2.527324] uhub3 at uhub1 port 1: vendor 0424 (0x0424) product 2514 (0=
x2514), class 9/0, rev 2.00/0.03, addr 2
[ 2.527324] uhub3: multiple transaction translators
[ 2.527324] uhub2: 4 ports with 2 removable, self powered
[ 2.527324] uhub3: 4 ports with 2 removable, self powered
[ 3.167324] wd0 at atabus0 drive 0
[ 3.167324] wd0: <ST1000VM002-9ZL162>
[ 3.167324] wd0: drive supports 16-sector PIO transfers, LBA48 addressi=
ng
[ 3.167324] wd0: 931 GB, 1936980 cyl, 16 head, 63 sec, 512 bytes/sect x=
1952476592 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 3.237325] wd0: GPT GUID: 71e22824-618e-4ce0-8ff9-89c960948559
[ 3.237325] dk0 at wd0: "EFI System Partition", 409600 blocks at 40, ty=
pe: msdos
[ 3.237325] dk1 at wd0: "macOS", 194042960 blocks at 671784, type: hfs
[ 3.237325] dk2 at wd0: "70d57bd8-2099-485f-9638-d525e0994cef", 1269536=
blocks at 194714744, type: <unknown>
[ 3.237325] dk3 at wd0: "NetBSD-stable", 488286536 blocks at 195984280,=
type: ffs
[ 3.237325] dk4 at wd0: "NetBSD-current", 487483816 blocks at 684532960=
, type: ffs
[ 3.237325] dk5 at wd0: "NetBSD-experimental", 488591712 blocks at 1172=
278920, type: ffs
[ 3.237325] dk6 at wd0: "NetBSD-swap", 67108864 blocks at 1661132776, t=
ype: swap
[ 3.237325] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode =
6 (Ultra/133), NCQ (32 tags)
[ 3.237325] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA=
mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.237325] atapibus0 at atabus1: 1 targets
[ 3.237325] cd0 at atapibus0 drive 0: <OPTIARC DVD RW AD-5680H, , 3AHB>=
cdrom removable
[ 3.247325] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode =
5 (Ultra/100)
[ 3.317324] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA=
mode 5 (Ultra/100) (using DMA)
[ 3.357324] uhub4 at uhub2 port 1: Apple Inc. (0x0a5c) BRCM2046 Hub (0x=
4500), class 9/0, rev 2.00/1.00, addr 3
[ 3.357324] uhub4: 3 ports with 0 removable, self powered
[ 3.367325] uvideo0 at uhub3 port 1 configuration 1 interface 0: Apple =
Inc. (0x05ac) Built-in iSight (0x8502), rev 2.00/2.46, addr 3
[ 3.417325] video0 at uvideo0: Apple Inc. (0x05ac) Built-in iSight (0x8=
502), rev 2.00/2.46, addr 3
[ 3.917324] uhidev0 at uhub3 port 2 configuration 1 interface 0
[ 3.917324] uhidev0: Apple Computer, Inc. (0x05ac) IR Receiver (0x8242)=
, rev 2.00/0.16, addr 4, iclass 3/0
[ 3.967325] uhidev0: 38 report ids
[ 3.967325] uhid0 at uhidev0 reportid 36: input=3D4, output=3D0, featur=
e=3D0
[ 3.967325] uhid1 at uhidev0 reportid 37: input=3D4, output=3D0, featur=
e=3D0
[ 3.967325] uhid2 at uhidev0 reportid 38: input=3D4, output=3D0, featur=
e=3D0
[ 4.227324] ubt0 at uhub4 port 1
[ 4.227324] ubt0: Apple Inc. (0x05ac) Bluetooth USB Host Controller (0x=
8215), rev 2.00/2.08, addr 4
[ 4.717324] uhidev1 at uhub4 port 2 configuration 1 interface 0
[ 4.717324] uhidev1: vendor 05ac (0x05ac) product 820a (0x820a), rev 2.=
00/1.00, addr 5, iclass 3/1
[ 4.717324] uhidev1: 1 report ids
[ 4.717324] ukbd0 at uhidev1 reportid 1
[ 4.717324] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[ 5.207323] uhidev2 at uhub4 port 3 configuration 1 interface 0
[ 5.207323] uhidev2: vendor 05ac (0x05ac) product 820b (0x820b), rev 2.=
00/1.00, addr 6, iclass 3/1
[ 5.207323] uhidev2: 2 report ids
[ 5.207323] ums0 at uhidev2 reportid 2: 3 buttons
[ 5.207323] wsmouse0 at ums0 mux 0
[ 5.697323] umass0 at uhub2 port 2 configuration 1 interface 0
[ 5.697323] umass0: Apple (0x05ac) Card Reader (0x8403), rev 2.00/98.33=
, addr 7
[ 5.697323] umass0: using SCSI over Bulk-Only
[ 5.697323] scsibus0 at umass0: 2 targets, 1 lun per target
[ 5.767324] sd0 at scsibus0 target 0 lun 0: <APPLE, SD Card Reader, 1.0=
0> disk removable
[ 5.767324] sd0: drive offline
[ 5.767324] autoconfiguration error: sd0: unable to open device, error =
=3D 19
[ 6.187323] uhub5 at uhub2 port 3: vendor 0451 (0x0451) product 1446 (0=
x1446), class 9/0, rev 1.10/1.10, addr 8
[ 6.187323] uhub5: 4 ports with 4 removable, self powered
[ 7.027323] uhidev3 at uhub5 port 1 configuration 1 interface 0
[ 7.027323] uhidev3: vendor 045e (0x045e) Microsoft Natural Keyboard Pr=
o (0x001d), rev 1.10/1.11, addr 9, iclass 3/1
[ 7.037323] ukbd1 at uhidev3
[ 7.037323] wskbd1 at ukbd1 mux 1
[ 7.037323] wskbd1: connecting to wsdisplay0
[ 7.037323] uhidev4 at uhub5 port 1 configuration 1 interface 1
[ 7.037323] uhidev4: vendor 045e (0x045e) Microsoft Natural Keyboard Pr=
o (0x001d), rev 1.10/1.11, addr 9, iclass 3/0
[ 7.037323] uhidev4: 2 report ids
[ 7.037323] uhid3 at uhidev4 reportid 1: input=3D2, output=3D0, feature=
=3D0
[ 7.037323] uhid4 at uhidev4 reportid 2: input=3D1, output=3D0, feature=
=3D0
[ 7.537323] uhidev5 at uhub5 port 2 configuration 1 interface 0
[ 7.537323] uhidev5: Microsoft (0x045e) Microsoft 3-Button Mouse with I=
ntelliEye(TM) (0x0040), rev 1.10/3.00, addr 10, iclass 3/1
[ 7.537323] ums1 at uhidev5: 3 buttons and Z dir
[ 7.537323] wsmouse1 at ums1 mux 0
[ 7.547323] swwdog0: software watchdog initialized
[ 7.697323] WARNING: 6 errors while detecting hardware; check system lo=
g.
[ 7.697323] boot device: wd0
[ 7.697323] root on dk5 dumps on dk6
[ 7.817322] root file system type: ffs
[ 7.817322] kern.module.path=3D/stand/amd64/10.0/modules
[ 133.917282] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 133.917282] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 133.927281] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 133.927281] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 2591.416477] syncing disks... done
[ 2591.466480] unmounted ptyfs on /dev/pts type ptyfs
[ 2592.056479] sd0: detached
[ 2592.056479] scsibus0: detached
[ 2592.056479] cd0: detached
[ 2592.056479] sysbeep0: detached
[ 2592.056479] midi0: detached
[ 2592.056479] atapibus0: detached
[ 2592.796476] brgphy0: detached
[ 2592.796476] bge0: detached
[ 2592.796476] iic0: detached
[ 2592.796476] atabus1: detached
[ 2592.796476] pci6: detached
[ 2592.796476] pci2: detached
[ 2592.796476] pchb6: detached
[ 2592.796476] pchb5: detached
[ 2592.796476] pchb4: detached
[ 2592.796476] pchb3: detached
[ 2592.796476] pchb2: detached
[ 2592.796476] pchb1: detached
[ 2592.796476] ichsmb0: detached
[ 2592.796476] ppb5: detached
[ 2592.796476] uvm_fault(0xfffff1bb34e589d8, 0x0, 2) -> e
[ 2592.796476] fatal page fault in supervisor mode
[ 2592.796476] trap type 6 code 0x2 rip 0xffffffff80310954 cs 0x8 rflags 0=
x10246 cr2 0 ilevel 0 rsp 0xffffc48135134da8
[ 2592.796476] curlwp 0xfffff1bb362965c0 pid 5097.5097 lowest kstack 0xfff=
fc481351302c0
[ 2592.796476] dumping to dev 168,6 (offset=3D58870455, size=3D1029801):
[ 2592.796476] dump
-----Original Message-----
From: Taylor R Campbell <campbell%mumble.net@localhost> On Behalf Of Taylor R Campbel=
l
Sent: Monday, November 13, 2023 7:03 AM
To: Josh Moyer <JMoyer%nodomain.net@localhost>
Cc: gnats-bugs%NetBSD.org@localhost; netbsd-bugs%NetBSD.org@localhost; dyoung%NetBSD.org@localhost
Subject: Re: kern/57696: NetBSD-10.0_RC1-amd64-install.img.gz kernel panics=
at reboot or shutdown on mid 2010 21.5" iMac
Can you share dmesg? Maybe dmesg with `boot -v -x'?
Looks like the failed attach path in ohci(4) and uhci(4) won't put the devi=
ce on the usb_pci list, which breaks detach because detach assumes it is on=
the list.
That said, I'm not sure why we set DVF_DETACH_SHUTDOWN for ohci(4) and
uhci(4) in the first place to make them detach on shutdown; it was set by d=
young@ in 2009 with a commit message that doesn't say anything about why th=
e change was made. dyoung: Do you remember anything?
We can fix the interaction of failed attach with detach, or we can remove D=
VF_DETACH_SHUTDOWN, but there's probably an underlying problem on attach th=
at the dmesg will provide hints about, and that's what we should really try=
to fix.
Home |
Main Index |
Thread Index |
Old Index