Re: kern/57564 test after the commit

[Ramiro Aceves <ea1abz%gmail.com@localhost>]

The following reply was made to PR port-evbarm/57564; it has been noted by GNATS.

From: Ramiro Aceves <ea1abz%gmail.com@localhost>
To: gnats-bugs%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
Cc: taylor R Campbell <riastradh%NetBSD.org@localhost>,
 Martin Husemann <martin%duskware.de@localhost>, port-arm-maintainer%NetBSD.org@localhost,
 port-evbarm-maintainer%netbsd.org@localhost
Subject: Re: kern/57564 test after the commit
Date: Tue, 8 Aug 2023 08:17:12 +0200

 Hello
 
 El 7/8/23 a las 21:55, Ramiro Aceves escribió:
 > The following reply was made to PR port-evbarm/57564; it has been noted by GNATS.
 > 
 > From: Ramiro Aceves <ea1abz%gmail.com@localhost>
 > To: gnats-bugs%netbsd.org@localhost, port-evbarm-maintainer%netbsd.org@localhost,
 >   gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
 > Cc:
 > Subject: Re: kern/57564
 > Date: Mon, 7 Aug 2023 21:50:07 +0200
 > 
 >   Hello,
 >   
 >   I have followed the great NetBSD Guide and crosscompiled a kernel from
 >   my Debian GNU/Linux machine:
 >   
 >   raspa-netbsd$ uname -a
 >   NetBSD raspa-netbsd 10.99.7 NetBSD 10.99.7 (MYKERNEL) #0: Mon Aug  7
 >   21:31:38 CEST 2023
 >   ramiro@debian-nuc8i7:/home/ramiro/cvs/src/sys/arch/evbarm/compile/MYKERNEL
 >   evbarm
 >   
 >   I am going to run the CVS torture and see what happens.
 >   
 >   Ramiro.
 
 
 
 The last crash left a different message on dmesg:
 
 panic: kernel diagnostic assertion "l == (l1 = curlwp)" failed: file 
 "../../../../sys/lwp.h",
 line 544 l=0x0 curlwp=0x9bcf3b80
 
 
 Here the complete messages in /var/run/dmesg.boot:
 
 
 
 
   of California.  All rights reserved.
 
 NetBSD 10.99.7 (MYKERNEL) #0: Mon Aug  7 21:31:38 CEST 2023
 	ramiro@debian-nuc8i7:/home/ramiro/cvs/src/sys/arch/evbarm/compile/MYKERNEL
 total memory = 448 MB
 avail memory = 428 MB
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 armfdt0 (roB enabled LABT
 cpu0: L1 16KB/32B 4-way (128 set) VIPT Instruction cache
 cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIPT Data cache
 vfp0 at cpu0: VFP11, rounding, exceptions
 fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
 fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
 bcmicu0 at simplebus1
 bcmcprman0 at simplebus1: BCM283x Clock Controller
 bcmtmr0 at simplebus1: VC System Timer
 bcmtmr0: interrupting on icu irq 3
 bcmaux0 at simplebus1
 /soc/thermal@7e212000 at simplebus1 not configured
 bcmgpio0 at simplebus1: GPIO controller 2835
 bcmgpio0: pins 0..31 interrupting on icu irq 49
 bcmgpio0: pins 32..54 interrupting on icu irq 50
 gpio0 at bcmgpio0: 54 pins
 bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 DMA11
 /soc/power at simplebus1 not configured
 /wifi-pwrseq at simplebus0 not configured
 /phy at simplebus0 not configured
 bsciic0 at simplebus1: Broadcom Serial Controller
 bsciic0: interrupting on icu irq 53
 iic0 at bsciic0: I2C bus
 bcmmbox0 at simplebus1: VC mailbox
 bcmmbox0: interrupting on icu irq 65
 vcmbox0 at bcmmbox0
 /soc/firmware at simplebus1 not configured
 /soc/txp@7e004000 at simplebus1 not configured
 plcom0 at simplebus1: ARM PL011 UART
 plcom0: txfifo 16 bytes
 plcom0: interrupting on icu irq 57
 bcmsdhost0 at simplebus1: SD HOST controller
 bcmsdhost0: interrupting on icu irq 56
 bsciic1 at simplebus1: Broadcom Serial Controller
 bsciic1: interrupting on icu irq 53
 iic1 at bsciic1: I2C bus
 com0 at simplebus1: BCM AUX UART, 1-byte FIFO
 com0: console
 com0: interrupting on icu irq 29
 sdhc0 at simplebus1: SDHC controller
 sdhc0: interrupting on icu irq 62
 bsciic2 at simplebus1: Broadcom Serial Controller
 bsciic2: interrupting on icu irq 53
 iic2 at bsciic2: I2C bus
 dwctwo0 at simplebus1: USB controller
 dwctwo0: interrupting on icu irq 9
 bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
 /soc/vec@7e806000 at simplebus1 not configured
 /soc/hdmi@7e902000 at simplebus1 not configured
 /soc/gpu at simplebus1 not configured
 genfb0 at simplebus1: switching to framebuffer console
 genfb0: framebuffer at 0x5e876000, size 1280x720, depth 32, stride 5120
 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 wsdisplay0: screen 1-3 added (default, vt100 emulation)
 vchiq0 at simplebus1: BCM2835 VCHIQ
 /arm-pmu at simplebus0 not configured
 gpioleds0 at simplebus0: ACT
 bcmrng0 at simplebus1: RNG
 entropy: ready
 timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 sdmmc0 at bcmsdhost0
 sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 
 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
 sdmmc1 at sdhc0 slot 0
 dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
 usb0 at dwctwo0: USB revision 2.0
 uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 
 2.00/1.00, addr 1
 uhub0: 1 port with 1 removable, self powered
 IPsec: Initialized Security Association Processing.
 sdmmc0: direct I/O error 5, r=6 p=0xc96edf14 write
 sdmmc0: SD card status: 4-bit, C10
 ld0 at sdmmc0: <0x03:0x5344:SL16G:0x80:0xed7b3c40:0x113>
 ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors
 ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
 sdmmc1: 4-bit width, 50.000 MHz
 bwfm0 at sdmmc1 function 1
 (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
 bwfm1 at uhub0 port 1: Broadcom (0x0a5c) BCMUSB 802.11 Wireless Adapter 
 (0xbd1e), rev 2.00/0.01, addr 2
 uhub0: autoconfiguration error: illegal enable change, port 1
 swwdog0: software watchdog initialized
 WARNING: 1 error while detecting hardware; check system log.
 boot device: ld0
 root on ld0a dumps on ld0b
 root file system type: ffs
 kern.module.path=/stand/evbarm/10.99.7/modules
 vchiq0: interrupting on icu irq 66
 vchiq: vchiq_init_state: slot_zero = 0xc9b30000, is_master = 0
 vchiq: local ver 8 (min 3), remote ver 8.
 vcaudio0 at vchiq0: auds
 notice: vchiq_get_state: g_state.remote->initialised != 1 (0)
 bwfm0: Firmware file default:    brcmfmac43430-sdio.bin
 bwfm0: Firmware file model-spec: 
 brcmfmac43430-sdio.raspberrypi,model-zero-w.bin
 WARNING: no TOD clock present
 WARNING: using filesystem time
 WARNING: CHECK AND RESET THE DATE!
 audio0 at vcaudio0: playback
 audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes 
 (40ms) for playback
 spkr0 at audio0: PC Speaker (synthesized)
 wsbell at spkr0 not configured
 bwfm1: address a0:64:8f:55:f6:9c
 bwfm1: wl0: Apr  3 2014 04:43:32 version 6.10.198.66 (r467479) FWID 
 01-32bd010e
 bwfm0: Found Firmware file: brcmfmac43430-sdio.bin
 bwfm0: NVRAM file default:    brcmfmac43430-sdio.txt
 bwfm0: NVRAM file model-spec: 
 brcmfmac43430-sdio.raspberrypi,model-zero-w.txt
 bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,model-zero-w.txt
 bwfm0: CLM file default:    brcmfmac43430-sdio.clm_blob
 bwfm0: CLM file model-spec: 
 brcmfmac43430-sdio.raspberrypi,model-zero-w.clm_blob
 bwfm0: CHIPACTIVE
 bwfm0: address b8:27:eb:5b:ff:03
 bwfm0: wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 
 01-e58d219f
 wsdisplay0: screen 4 added (default, vt100 emulation)
 panic: kernel diagnostic assertion "l == (l1 = curlwp)" failed: file 
 "../../../../sys/lwp.h", line 544 l=0x0 curlwp=0x9bcf3b80
 cpu0: Begin traceback...
 0xc9c41af4: netbsd:db_panic+0xc
 0xc9c41b14: netbsd:vpanic+0xf4
 0xc9c41b2c: netbsd:kern_assert+0x3c
 0xc9c41b84: netbsd:cache_lookup+0x7c0
 0xc9c41c34: netbsd:ufs_lookup+0xcc
 0xc9c41c6c: netbsd:VOP_LOOKUP+0x48
 0xc9c41cc4: netbsd:lookup_once+0x1b8
 0xc9c41d8c: netbsd:namei_tryemulroot+0x984
 0xc9c41dc4: netbsd:namei+0x34
 0xc9c41e34: netbsd:do_sys_statat+0xf0
 0xc9c41eec: netbsd:sys___stat50+0x2c
 0xc9c41fac: netbsd:syscall+0x188
 cpu0: End traceback...
 
 dump to dev 92,1 not possible
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
      2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
      2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 10.99.7 (MYKERNEL) #0: Mon Aug  7 21:31:38 CEST 2023
 	ramiro@debian-nuc8i7:/home/ramiro/cvs/src/sys/arch/evbarm/compile/MYKERNEL
 total memory = 448 MB
 avail memory = 428 MB
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 armfdt0 (root)
 simplebus0 at armfdt0: Raspberry Pi Zero W Rev 1.1
 simplebus1 at simplebus0
 simplebus2 at simplebus0
 simplebus3 at simplebus0
 cpus0 at simplebus0
 cpu0 at cpus0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core)
 cpu0: DC enabled IC enabled WB enabled LABT
 cpu0: L1 16KB/32B 4-way (128 set) VIPT Instruction cache
 cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIPT Data cache
 vfp0 at cpu0: VFP11, rounding, exceptions
 fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
 fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
 bcmicu0 at simplebus1
 bcmcprman0 at simplebus1: BCM283x Clock Controller
 bcmtmr0 at simplebus1: VC System Timer
 bcmtmr0: interrupting on icu irq 3
 bcmaux0 at simplebus1
 /soc/thermal@7e212000 at simplebus1 not configured
 bcmgpio0 at simplebus1: GPIO controller 2835
 bcmgpio0: pins 0..31 interrupting on icu irq 49
 bcmgpio0: pins 32..54 interrupting on icu irq 50
 gpio0 at bcmgpio0: 54 pins
 bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 DMA11
 /soc/power at simplebus1 not configured
 /wifi-pwrseq at simplebus0 not configured
 /phy at simplebus0 not configured
 bsciic0 at simplebus1: Broadcom Serial Controller
 bsciic0: interrupting on icu irq 53
 iic0 at bsciic0: I2C bus
 bcmmbox0 at simplebus1: VC mailbox
 bcmmbox0: interrupting on icu irq 65
 vcmbox0 at bcmmbox0
 /soc/firmware at simplebus1 not configured
 /soc/txp@7e004000 at simplebus1 not configured
 plcom0 at simplebus1: ARM PL011 UART
 plcom0: txfifo 16 bytes
 plcom0: interrupting on icu irq 57
 bcmsdhost0 at simplebus1: SD HOST controller
 bcmsdhost0: interrupting on icu irq 56
 bsciic1 at simplebus1: Broadcom Serial Controller
 bsciic1: interrupting on icu irq 53
 iic1 at bsciic1: I2C bus
 com0 at simplebus1: BCM AUX UART, 1-byte FIFO
 com0: console
 com0: interrupting on icu irq 29
 sdhc0 at simplebus1: SDHC controller
 sdhc0: interrupting on icu irq 62
 bsciic2 at simplebus1: Broadcom Serial Controller
 bsciic2: interrupting on icu irq 53
 iic2 at bsciic2: I2C bus
 dwctwo0 at simplebus1: USB controller
 dwctwo0: interrupting on icu irq 9
 bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
 /soc/vec@7e806000 at simplebus1 not configured
 /soc/hdmi@7e902000 at simplebus1 not configured
 /soc/gpu at simplebus1 not configured
 genfb0 at simplebus1: switching to framebuffer console
 genfb0: framebuffer at 0x5e876000, size 1280x720, depth 32, stride 5120
 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 wsdisplay0: screen 1-3 added (default, vt100 emulation)
 vchiq0 at simplebus1: BCM2835 VCHIQ
 /arm-pmu at simplebus0 not configured
 gpioleds0 at simplebus0: ACT
 bcmrng0 at simplebus1: RNG
 entropy: ready
 timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 sdmmc0 at bcmsdhost0
 sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 
 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
 sdmmc1 at sdhc0 slot 0
 dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
 usb0 at dwctwo0: USB revision 2.0
 uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 
 2.00/1.00, addr 1
 uhub0: 1 port with 1 removable, self powered
 IPsec: Initialized Security Association Processing.
 sdmmc0: direct I/O error 5, r=6 p=0xc96edf14 write
 sdmmc0: SD card status: 4-bit, C10
 ld0 at sdmmc0: <0x03:0x5344:SL16G:0x80:0xed7b3c40:0x113>
 ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors
 ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
 sdmmc1: 4-bit width, 50.000 MHz
 bwfm0 at sdmmc1 function 1
 (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
 bwfm1 at uhub0 port 1: Broadcom (0x0a5c) BCMUSB 802.11 Wireless Adapter 
 (0xbd1e), rev 2.00/0.01, addr 2
 uhub0: autoconfiguration error: illegal enable change, port 1
 swwdog0: software watchdog initialized
 WARNING: 1 error while detecting hardware; check system log.
 boot device: ld0
 root on ld0a dumps on ld0b
 root file system type: ffs
 kern.module.path=/stand/evbarm/10.99.7/modules
 vchiq0: interrupting on icu irq 66
 vchiq: vchiq_init_state: slot_zero = 0xc9b30000, is_master = 0
 vchiq: local ver 8 (min 3), remote ver 8.
 vcaudio0 at vchiq0: auds
 notice: vchiq_get_state: g_state.remote->initialised != 1 (0)
 bwfm0: Firmware file default:    brcmfmac43430-sdio.bin
 bwfm0: Firmware file model-spec: 
 brcmfmac43430-sdio.raspberrypi,model-zero-w.bin
 WARNING: no TOD clock present
 WARNING: using filesystem time
 WARNING: CHECK AND RESET THE DATE!
 audio0 at vcaudio0: playback
 audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes 
 (40ms) for playback
 spkr0 at audio0: PC Speaker (synthesized)
 wsbell at spkr0 not configured
 bwfm1: address a0:64:8f:55:f6:9c
 bwfm1: wl0: Apr  3 2014 04:43:32 version 6.10.198.66 (r467479) FWID 
 01-32bd010e
 bwfm0: Found Firmware file: brcmfmac43430-sdio.bin
 bwfm0: NVRAM file default:    brcmfmac43430-sdio.txt
 bwfm0: NVRAM file model-spec: 
 brcmfmac43430-sdio.raspberrypi,model-zero-w.txt
 bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,model-zero-w.txt
 bwfm0: CLM file default:    brcmfmac43430-sdio.clm_blob
 bwfm0: CLM file model-spec: 
 brcmfmac43430-sdio.raspberrypi,model-zero-w.clm_blob
 bwfm0: CHIPACTIVE
 bwfm0: address b8:27:eb:5b:ff:03
 bwfm0: wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 
 01-e58d219f
 wsdisplay0: screen 4 added (default, vt100 emulation)