NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

port-hpcmips/40464: right terminal not selected after install

>Number:         40464
>Category:       port-hpcmips
>Synopsis:       right terminal not selected after install
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    port-hpcmips-maintainer
>State:          open
>Class:          change-request
>Submitter-Id:   net
>Arrival-Date:   Sat Jan 24 00:05:00 +0000 2009
>Originator:     Oliver Reißig
>Release:        NetBSD 4.0.1
NetBSD  4.0.1 NetBSD 4.0.1 (GENERIC) #0: Tue Oct  7 22:34:15 PDT 2008  
When installing NetBSD-hpcmips with serial console only (actually installed on 
gxemul without framebuffer-support) the INSTALL kernel works, but GENERIC will 
fail booting with

Starting cron. 
Fri Jan 23 23:41:22 UTC 2009 
Jan 23 23:41:22  getty[406]: /dev/ttyE0: Device not configured 

It would be nice if the installer would set the appropriate settings in 
/etc/ttys depending on the console during installation.

cat /etc/ttys 

      $NetBSD: ttys,v 1.8 2004/06/20 21:30:27 christos Exp $ 
# name  getty                           type    status          comments 
# serial port 
console "/usr/libexec/getty std.9600"   vt100   on secure 
# Workstation console (framebuffer) ttys 
ttyE0   "/usr/libexec/getty std.9600"   vt100   on secure 

(I changed off to on there)

Home | Main Index | Thread Index | Old Index