Re: kern/38540: recent i386 GENERIC kernel cannot boot with VIA chipset

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,nakaji%jp.freebsd.org@localhost
Subject: Re: kern/38540: recent i386 GENERIC kernel cannot boot with VIA chipset
From: NAKAJI Hiroyuki <nakaji%jp.freebsd.org@localhost>
Date: Fri, 2 May 2008 02:00:09 +0000 (UTC)
The following reply was made to PR kern/38540; it has been noted by GNATS.

From: NAKAJI Hiroyuki <nakaji%jp.freebsd.org@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/38540: recent i386 GENERIC kernel cannot boot with VIA chipset
Date: Fri, 02 May 2008 09:32:03 +0900

 Same boot failure occurs on amd64, too. The mainboard is Albatron
 K8M800-754 with VIA K8M800 and VT8237 chipset.
 
 GENERIC 4.99.62 fails:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.62 (GENERIC) #0: Fri May  2 08:35:42 JST 2008
        
root%kature.heimat.gr.jp@localhost:/usr/obj/sys/arch/amd64/compile.amd64/GENERIC
 total memory = 446 MB
 avail memory = 418 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 Calibrating TSC clock ... TSC clock: 1600108570 Hz
 SMBIOS rev. 2.3 @ 0xf0000 (33 entries)
     ( )
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: (boot processor)
 cpu0: AMD Sempron(tm) Processor 2800+, 1600.06 MHz
 cpu0: features e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
 cpu0: features e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
 cpu0: features2 1<SSE3>
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 256 KB 64B/line 16-way
 cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: Initial APIC ID 0
 cpu0: AMD Power Management features: 39<STC,TM,TTP,TS>
 cpu0: calibrating local timer
 cpu0: apic clock running at 200 MHz
 timecounter: Timecounter "lapic" frequency 200115909 Hz quality -100
 cpu0: WARNING: AMD errata present, BIOS upgrade may be
 cpu0: WARNING: necessary to ensure reliable operation
 cpu0: 8 page colors
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20080321
 acpi0: X/RSDT: OemId <VIAK8M,AWRDACPI,42302e31>, AslId <AWRD,00000000>
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 ALKB: Links after initial probe:
 Link Device ALKB:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKB: Links after initial validation:
 Link Device ALKB:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKB: Links after disable:
 Link Device ALKB:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   Y     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKB: ACPI: Found matching pin for 0.16.INTA at func 0: 5
 ALKB: BIOS IRQ 5 does not match initial IRQ 11
 ALKB: ACPI: Found matching pin for 0.16.INTB at func 2: 11
 ALKB: BIOS IRQ 11 for 0.16.INTB does not match previous BIOS IRQ 5
 ALKB: ACPI: Found matching pin for 0.16.INTC at func 4: 3
 ALKB: BIOS IRQ 3 for 0.16.INTC does not match previous BIOS IRQ 5
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 ALKA: Links after initial probe:
 Link Device ALKA:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKA: Links after initial validation:
 Link Device ALKA:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKA: Links after disable:
 Link Device ALKA:
 Index  IRQ  Rtd  Ref  IRQs
     0  255   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 ALKC: Links after initial probe:
 Link Device ALKC:
 Index  IRQ  Rtd  Ref  IRQs
     0    3   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKC: Links after initial validation:
 Link Device ALKC:
 Index  IRQ  Rtd  Ref  IRQs
     0    3   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKC: Links after disable:
 Link Device ALKC:
 Index  IRQ  Rtd  Ref  IRQs
     0    3   Y     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKC: ACPI: Found matching pin for 0.17.INTC at func 5: 3
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 ALKD: Links after initial probe:
 Link Device ALKD:
 Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKD: Links after initial validation:
 Link Device ALKD:
 Index  IRQ  Rtd  Ref  IRQs
     0   10   N     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKD: Links after disable:
 Link Device ALKD:
 Index  IRQ  Rtd  Ref  IRQs
     0   10   Y     0  1 3 4 5 6 7 10 11 12 14 15 polarity 1 trigger 0
 
 ALKA: ACPI: Found matching pin for 0.15.INTA at func 1: 255
 ALKA: ACPI: Found matching pin for 0.15.INTB at func 0: 11
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 MEM (PNP0C01) [System Board] at acpi0 not configured
 PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
 PMIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 ALKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 ALKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 ALKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
 DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
 pcppi1 at acpi0 (SPKR, PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
 FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
 UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
 LPT1 (PNP0400) [Standard LPT printer port] at acpi0 not configured
 pckbc1 at acpi0 (PS2M, PNP0F13): aux port
 pckbc1: irq 12
 pckbc2 at acpi0 (PS2K, PNP0303): kbd port
 pckbc2: io 0x60,0x64 irq 1
 FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
 acpitz0 at acpi0 (THRM): active cooling level 0: 125.0C critical 127.0C 
passive 30.0C
 attimer1: attached to pcppi1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: VIA Technologies K8M800 Host (rev. 0x00)
 agp0 at pchb0: 1 Miscellaneous Control unit(s) found.
 agp0: aperture at 0xe8000000, size 0x8000000
 pchb1 at pci0 dev 0 function 1
 pchb1: VIA Technologies product 0x1204 (rev. 0x00)
 pchb2 at pci0 dev 0 function 2
 pchb2: VIA Technologies product 0x2204 (rev. 0x00)
 pchb3 at pci0 dev 0 function 3
 pchb3: VIA Technologies product 0x3204 (rev. 0x00)
 pchb4 at pci0 dev 0 function 4
 pchb4: VIA Technologies product 0x4204 (rev. 0x00)
 pchb5 at pci0 dev 0 function 7
 pchb5: VIA Technologies product 0x7204 (rev. 0x00)
 ppb0 at pci0 dev 1 function 0: VIA Technologies K8HTB AGP (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 0 function 0: VIA Technologies product 0x3108 (rev. 0x01)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 direct rendering for vga0 unsupported
 rtk0 at pci0 dev 11 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
 rtk0: interrupting at ioapic0 pin 19 (irq 10)
 rtk0: Ethernet address 00:30:18:ac:38:ac
 rlphy0 at rtk0 phy 7: Realtek internal PHY
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 viaide0 at pci0 dev 15 function 0
 viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to native-PCI mode
 panic: mpacpi_findintr_linkdev: irq mismatch
 
 while 4.99.34 GENERIC kernel can boot:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.34 (GENERIC) #7: Tue Oct 30 23:30:11 JST 2007
        
root%kature.heimat.gr.jp@localhost:/usr/obj/sys/arch/amd64/compile.amd64/GENERIC
 total memory = 446 MB
 avail memory = 418 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: (boot processor)
 cpu0: AMD Sempron(tm) Processor 2800+, 1600.10 MHz
 cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
 cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
 cpu0: features2: 1<SSE3>
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 256 KB 64B/line 16-way
 cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: AMD Power Management features: 39<STC,TM,TTP,TS>
 cpu0: WARNING: AMD errata present, BIOS upgrade may be
 cpu0: WARNING: necessary to ensure reliable operation
 cpu0: calibrating local timer
 cpu0: apic clock running at 199 MHz
 cpu0: 8 page colors
 ioapic0 at mainbus0 apid 2
 ioapic0: pa 0xfec00000, version 3, 24 pins
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20060217
 acpi0: X/RSDT: OemId <VIAK8M,AWRDACPI,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 MEM (PNP0C01) [System Board] at acpi0 not configured
 PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
 PMIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 ALKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 ALKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 ALKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
 DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
 pcppi1 at acpi0 (SPKR, PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
 FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
 com2 at acpi0 (UAR1, PNP0501-1)
 com2: io 0x3f8-0x3ff irq 4
 com2: ns16550a, working fifo
 lpt2 at acpi0 (LPT1, PNP0400-1)
 lpt2: io 0x378-0x37f irq 7
 pckbc1 at acpi0 (PS2M, PNP0F13): aux port
 pckbc1: irq 12
 pckbc2 at acpi0 (PS2K, PNP0303): kbd port
 pckbc2: io 0x60,0x64 irq 1
 FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
 acpitz0 at acpi0 (THRM): ACPI Thermal Zone
 acpitz0: unable to get polling interval; using default of 30.0s
 acpitz0: active cooling level 0: 125.0C
 acpitz0: critical 127.0C passive 30.0C
 apm0 at acpi0: Power Management spec V1.2
 pcppi1: attached to attimer1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: VIA Technologies K8M800 Host (rev. 0x00)
 agp0 at pchb0 (v3): aperture at 0xe8000000, size 0x10000000
 pchb1 at pci0 dev 0 function 1
 pchb1: VIA Technologies product 0x1204 (rev. 0x00)
 pchb2 at pci0 dev 0 function 2
 pchb2: VIA Technologies product 0x2204 (rev. 0x00)
 pchb3 at pci0 dev 0 function 3
 pchb3: VIA Technologies product 0x3204 (rev. 0x00)
 pchb4 at pci0 dev 0 function 4
 pchb4: VIA Technologies product 0x4204 (rev. 0x00)
 pchb5 at pci0 dev 0 function 7
 pchb5: VIA Technologies product 0x7204 (rev. 0x00)
 ppb0 at pci0 dev 1 function 0: VIA Technologies K8HTB AGP (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 0 function 0: VIA Technologies product 0x3108 (rev. 0x01)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 direct rendering for vga0 unsupported
 rtk0 at pci0 dev 11 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
 rtk0: interrupting at ioapic0 pin 19 (irq 10)
 rtk0: Ethernet address 00:30:18:ac:38:ac
 rlphy0 at rtk0 phy 7: Realtek internal PHY
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 viaide0 at pci0 dev 15 function 0
 viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to native-PCI mode
 viaide0: using ioapic0 pin 20 (irq 11) for native-PCI interrupt
 atabus0 at viaide0 channel 0
 viaide0: secondary channel configured to native-PCI mode
 atabus1 at viaide0 channel 1
 viaide1 at pci0 dev 15 function 1
 viaide1: VIA Technologies VT8237 ATA133 controller
 viaide1: bus-master DMA support present
 viaide1: primary channel configured to compatibility mode
 viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus2 at viaide1 channel 0
 viaide1: secondary channel configured to compatibility mode
 viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus3 at viaide1 channel 1
 uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller 
(rev. 0x81)
 uhci0: interrupting at ioapic0 pin 21 (irq 5)
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller 
(rev. 0x81)
 uhci1: interrupting at ioapic0 pin 21 (irq 5)
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller 
(rev. 0x81)
 uhci2: interrupting at ioapic0 pin 21 (irq 11)
 usb2 at uhci2: USB revision 1.0
 uhub2 at usb2
 uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller 
(rev. 0x81)
 uhci3: interrupting at ioapic0 pin 21 (irq 11)
 usb3 at uhci3: USB revision 1.0
 uhub3 at usb3
 uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller 
(rev. 0x86)
 ehci0: interrupting at ioapic0 pin 21 (irq 3)
 ehci0: dropped intr workaround enabled
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 uhub4 at usb4
 uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 pcib0 at pci0 dev 17 function 0
 pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
 auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 
0x60)
 auvia0: interrupting at ioapic0 pin 22 (irq 3)
 auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
 auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
 audio0 at auvia0: full duplex, independent
 pchb6 at pci0 dev 24 function 0
 pchb6: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00)
 pchb7 at pci0 dev 24 function 1
 pchb7: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00)
 pchb8 at pci0 dev 24 function 2
 pchb8: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00)
 pchb9 at pci0 dev 24 function 3
 pchb9: Advanced Micro Devices K8 AMD64 Miscellaneous configuration (rev. 0x00)
 isa0 at pcib0
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 wd0 at atabus2 drive 0: <ST330621A>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 28629 MB, 58168 cyl, 16 head, 63 sec, 512 bytes/sect x 58633344 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 atapibus0 at atabus3: 2 targets
 cd0 at atapibus0 drive 0: <ATAPI DVDROM, , V1.40> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2
 cd0(viaide1:1:0): using PIO mode 4, DMA mode 2 (using DMA)
 Kernelized RAIDframe activated
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 -- 
 NAKAJI Hiroyuki
Prev by Date: Re: kern/34843: FAST_IPSEC and "use"
Next by Date: Re: kern/38554: kernel condvar wait functions should take an absolute timeout
Previous by Thread: kern/38540: recent i386 GENERIC kernel cannot boot with VIA chipset
Next by Thread: Re: kern/38537 (__HAVE_PREEMPTION requires MULTIPROCESSOR)
Indexes:
Home | Main Index | Thread Index | Old Index