Re: wm devices don't work under current amd64

[Tom Ivar Helbekkmo <tih%hamartun.priv.no@localhost>]

Masanobu SAITOH <msaitoh%execsw.org@localhost> writes:

> On 2016/03/07 21:12, Tobias Nygren wrote:
>> [...]
>> I'm not sure if this is relevant to the discussion, but I have a wm(4)
>> device (8086:1502) on -current that does not work after boot. It comes
>> to life only after running "tcpdump -n -i wm0" once.

That's interesting -- I'll try that on my Dell 2650, and see what
happens.  It didn't do anything for the Dell E6400 laptop, though.

>  It must be a bug! Could you tell me how you set up network interface
> include vlan? (e.g. part of /etc/rc.conf, /etc/ifconfig.xxx, and the
> output of "ifconfig -a)

For my part, I simply do this (vlan0 being my primary internal LAN, and
vlan1 being the glue net facing my ISP):

/etc/ifconfig.wm0:

up
media 100baseTX mediaopt full-duplex
!sleep 30

/etc/ifconfig.vlan0:

create
vlan 10 vlanif wm0
inet 193.71.27.8 prefixlen 27
inet 193.71.27.5 prefixlen 27 alias
inet 193.71.27.1 prefixlen 27 alias

/etc/ifconfig.vlan1:

create
vlan 11 vlanif wm0
inet 81.0.129.41 prefixlen 30
!route -q add default 81.0.129.42

/etc/ifconfig.vlan2:

create
vlan 12 vlanif wm0
inet 172.27.201.1 prefixlen 24

/etc/ifconfig.vlan3:

create
vlan 13 vlanif wm0
inet 172.27.202.1 prefixlen 24

-tih
-- 
Elections cannot be allowed to change anything.  --Dr. Wolfgang Schäuble