Re: wm devices don't work under current amd64

[Tom Ivar Helbekkmo <tih%hamartun.priv.no@localhost>]

Masanobu SAITOH <msaitoh%execsw.org@localhost> writes:

>  0) Did you check /var/log/message if device timouts occured?

No timeouts.  Everything behaves as if there were no incoming traffic.

>  1) Is Intel AMT set to enable by BIOS?

No, it's not.

>  2) Could you show me the output of "ifconfig -v wm0"

wm0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	capabilities=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
	capabilities=7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
	capabilities=7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
	enabled=0
	ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
	ec_enabled=0
	address: 00:26:b9:cd:21:c2
	media: Ethernet 100baseTX full-duplex
	status: active
	input: 0 packets, 0 bytes
	output: 20 packets, 2608 bytes, 9 multicasts
	inet 169.254.22.67 netmask 0xffff0000 broadcast 169.254.255.255
	inet6 fe80::226:b9ff:fecd:21c2%wm0 prefixlen 64 scopeid 0x1

>  Is it possible to test with 7.0(RELEASE) and the latest snapshot
> of netbsd-7 branch?

I'll burn a couple of CDs, and try those tonight.

-tih
-- 
Elections cannot be allowed to change anything.  --Dr. Wolfgang Schäuble