Port-xen archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: netbsd-5 i386 PAE dom0 + hvm domU winxp?



On Sun, Mar 21, 2010 at 11:16:24PM +0100, Jean-Yves Migeon wrote:
> On 03/21/10 19:09, Jukka Marin wrote:
> >Any ideas?  Please :-)
> 
> Looks like the qemu-dm layer failed to initialize the vbd frontend.
> 
> Post:
> - xm dmesg
> - dmesg
> - /var/log/xen/qemu-dm-*.log
> 
> BTW, is pae enabled or disabled in your domain config file?

I have tried adding "pae = 1" to config file, but it didn't have any effect.
It seems (from reading the logs) that PAE is automatically enabled.  (I
haven't tried disabling it, it seemed to be enabled before the PAE upgrade
as well.)

Last night, I updated dev86 to dev86-0.16.17nb2 and rebuilt xentools33.  One
more error message appeared in qemu-dm-winxp.log:

qemu: could not open vbd ¿local/domain/18/device/vbd/768/phantom_vbd' or
hard disk image ¿dev/sd2e' (drv 'phy' format 'raw')

(I didn't do anything to the disk.)

Here are the logs you asked for, first xm dmesg:

 __  __            _____  _____  ____  
 \ \/ /___ _ __   |___ / |___ / |___ \ 
  \  // _ \ '_ \    |_ \   |_ \   __) |
  /  \  __/ | | |  ___) | ___) | / __/ 
 /_/\_\___|_| |_| |____(_)____(_)_____|
                                       
(XEN) Xen version 3.3.2 (root@) (gcc version 4.1.3 20080704 prerelease (NetBSD 
nb2 20081120)) Sat Mar 20 15:06:55 EET 2010
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dom0_mem=512M
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 8 MBR signatures
(XEN)  Found 6 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009cc00 (usable)
(XEN)  000000000009cc00 - 00000000000a0000 (reserved)
(XEN)  00000000000cc000 - 00000000000d0000 (reserved)
(XEN)  00000000000e4000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000cff60000 (usable)
(XEN)  00000000cff60000 - 00000000cff69000 (ACPI data)
(XEN)  00000000cff69000 - 00000000cff80000 (ACPI NVS)
(XEN)  00000000cff80000 - 00000000d0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fec10000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000230000000 (usable)
(XEN) System RAM: 8190MB (8387568kB)
(XEN) ACPI: RSDP 000F61D0, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT CFF634A5, 0060 (r1 PTLTD    RSDT    6040000  LTP        0)
(XEN) ACPI: FACP CFF68DD8, 0074 (r1 INTEL  TUMWATER  6040000 PTL         3)
(XEN) ACPI: DSDT CFF64FD7, 3E01 (r1  Intel BLAKFORD  6040000 MSFT  100000E)
(XEN) ACPI: FACS CFF69FC0, 0040
(XEN) ACPI: APIC CFF68E4C, 00C8 (r1 PTLTD        APIC    6040000  LTP        0)
(XEN) ACPI: MCFG CFF68F14, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
(XEN) ACPI: HPET CFF68F50, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
(XEN) ACPI: BOOT CFF68F88, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
(XEN) ACPI: SPCR CFF68FB0, 0050 (r1 PTLTD  $UCRTBL$  6040000 PTL         1)
(XEN) ACPI: SSDT CFF64D78, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF64CD2, 00A6 (r1  PmRef  Cpu7Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF64C2C, 00A6 (r1  PmRef  Cpu6Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF64B86, 00A6 (r1  PmRef  Cpu5Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF64AE0, 00A6 (r1  PmRef  Cpu4Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF64A3A, 00A6 (r1  PmRef  Cpu3Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF64994, 00A6 (r1  PmRef  Cpu2Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF648EE, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050228)
(XEN) ACPI: SSDT CFF63505, 13E9 (r1  PmRef    CpuPm     3000 INTL 20050228)
(XEN) Xen heap: 9MB (9676kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #4 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) Processor #5 7:7 APIC version 20
(XEN) Processor #2 7:7 APIC version 20
(XEN) Processor #6 7:7 APIC version 20
(XEN) Processor #3 7:7 APIC version 20
(XEN) Processor #7 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2666.825 MHz processor.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
(XEN) Booting processor 1/4 eip 8c000
(XEN) CPU1: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 0a
(XEN) Booting processor 2/1 eip 8c000
(XEN) CPU2: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
(XEN) Booting processor 3/5 eip 8c000
(XEN) CPU3: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 0a
(XEN) Booting processor 4/2 eip 8c000
(XEN) CPU4: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
(XEN) Booting processor 5/6 eip 8c000
(XEN) CPU5: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 0a
(XEN) Booting processor 6/3 eip 8c000
(XEN) CPU6: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 06
(XEN) Booting processor 7/7 eip 8c000
(XEN) CPU7: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz stepping 0a
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 8 CPUs
(XEN) I/O virtualisation disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 32-bit, PAE, lsb
(XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc0aa9d54
(XEN)  Dom0 symbol map 0xc0aa9d54 -> 0xc0b7c9a0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   000000003e000000->000000003f000000 (126976 pages to be 
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c0b7c9a0
(XEN)  Init. ramdisk: c0b7d000->c0b7d000
(XEN)  Phys-Mach map: c0b7d000->c0bfd000
(XEN)  Start info:    c0bfd000->c0bfd474
(XEN)  Page tables:   c0bfe000->c0c0b000
(XEN)  Boot stack:    c0c0b000->c0c0c000
(XEN)  TOTAL:         c0000000->c1000000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: 
...........................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
Xen)
(XEN) Freed 96kB init memory.
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!

Next, dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (ASLAN) #0: Sat Mar 20 14:50:46 EET 2010
        root@aslan:/ker/compile/ASLAN
total memory = 512 MB
avail memory = 490 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
mainbus0: scanning 0x9cc00 to 0x9cff0 for MP signature
mainbus0: scanning 0x9c800 to 0x9cbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf6200
mainbus0: MP config table at 0x9d1a1, 564 bytes long
cpu0 at mainbus0 apid 0: (boot processor)
cpu1 at mainbus0 apid 4: (application processor)
cpu2 at mainbus0 apid 1: (application processor)
cpu3 at mainbus0 apid 5: (application processor)
cpu4 at mainbus0 apid 2: (application processor)
cpu5 at mainbus0 apid 6: (application processor)
cpu6 at mainbus0 apid 3: (application processor)
cpu7 at mainbus0 apid 7: (application processor)
ioapic0 at mainbus0 apid 8: pa 0xfec00000, virtual wire mode, version 20, 24 
pins
ioapic1 at mainbus0 apid 9: pa 0xfec80000, virtual wire mode, version 20, 24 
pins
ipmi0 at mainbus0
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel 686-class, 2666MHz, id 0x10676
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
acpi0 at hypervisor0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 3
mpacpi: found subordinate bus 3 at level 4
mpacpi: found subordinate bus 4 at level 4
mpacpi: found subordinate bus 5 at level 3
mpacpi: found subordinate bus 6 at level 2
mpacpi: found subordinate bus 7 at level 2
mpacpi: 8 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (1/1)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 4 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 6 int routing
mpacpi: configuring PCI bus 7 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act 
Hi,trig=1=Edge>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act 
Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 29 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 29 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 30 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 30 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 31 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci2 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci3 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci3 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci3 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci4 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci4 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci5 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci5 device 2 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci5 device 2 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci5 device 2 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 0 attached to pci5 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci5 device 1 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci5 device 1 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci5 device 1 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci5 device 3 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci5 device 3 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci6 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci6 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci6 device 0 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci6 device 0 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 1 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 2 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 2 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 3 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 3 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 3 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci7 device 3 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci7 device 4 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci7 device 4 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci7 device 4 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci7 device 4 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int9 189a0<vector=a0,delmode=1,logical,level,masked,dest=0> 
ff000000<target=ff>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
MATH (PNP0C04) [Math Coprocessor] at acpi0 not configured
HPET (PNP0103) [HPET Timer] at acpi0 not configured
SPKR (PNP0800) [AT-style speaker sound] at acpi0 not configured
TIME (PNP0100) [AT Timer] at acpi0 not configured
FWHD (INT0800) [Intel FWH Random Number Generator] at acpi0 not configured
KBC0 (PNP0303) [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not 
configured
MSE0 (PNP0F13) [PS/2 Port for PS/2-style Mice] at acpi0 not configured
COM1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COM2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x25d4 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: Intel 5000 Series Chipset PCI Express x8 Port 
2-3 (rev. 0xb1)
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 0 function 0: Intel 63xxESB PCI Express Upstream Port (rev. 
0x01)
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 0 function 0: Intel 63xxESB PCI Express Downstream Port #1 
(rev. 0x01)
pci3 at ppb2 bus 3
ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
arcmsr0 at pci3 dev 0 function 0ioapic0: int16 
1a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0> ff000000<target=ff>

arcmsr0: interrupting at ioapic0 pin 16, event channel 3
arcmsr0: Areca ARC-1261 Host Adapter RAID controller
arcmsr0: 16 ports, 2048MB SDRAM, firmware <V1.47 2009-06-25>
scsibus0 at arcmsr0: 16 targets, 8 luns per target
ppb3 at pci2 dev 2 function 0: Intel 63xxESB PCI Express Downstream Port #3 
(rev. 0x01)
pci4 at ppb3 bus 4
ppb3: added to list as bus 4
pci4: i/o space, memory space enabled
wm0 at pci4 dev 0 function 0: i80003 dual 1000baseT Ethernet, rev. 1
ioapic0: int18 1a9b0<vector=b0,delmode=1,logical,actlo,level,masked,dest=0> 
ff000000<target=ff>
wm0: interrupting at ioapic0 pin 18, event channel 4
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:65:1a:a4
ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm1 at pci4 dev 0 function 1: i80003 dual 1000baseT Ethernet, rev. 1
ioapic0: int19 1a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0> 
ff000000<target=ff>
wm1: interrupting at ioapic0 pin 19, event channel 5
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:65:1a:a5
ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb4 at pci1 dev 0 function 3: Intel 63xxESB PCI Express to PCI-X Bridge (rev. 
0x01)
ppb4: disabling notification events
pci5 at ppb4 bus 5
ppb4: added to list as bus 5
pci5: i/o space, memory space enabled
Intel product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 
function 0 not configured
pchb1 at pci0 dev 16 function 0
pchb1: Intel 5000 Series Chipset FSB Registers (rev. 0xb1)
pchb2 at pci0 dev 16 function 1
pchb2: Intel 5000 Series Chipset FSB Registers (rev. 0xb1)
pchb3 at pci0 dev 16 function 2
pchb3: Intel 5000 Series Chipset FSB Registers (rev. 0xb1)
pchb4 at pci0 dev 17 function 0
pchb4: Intel 5000 Series Chipset Reserved Registers (rev. 0xb1)
pchb5 at pci0 dev 19 function 0
pchb5: Intel 5000 Series Chipset Reserved Registers (rev. 0xb1)
pchb6 at pci0 dev 21 function 0
pchb6: Intel 5000 Series Chipset FBD Registers (rev. 0xb1)
pchb7 at pci0 dev 22 function 0
pchb7: Intel 5000 Series Chipset FBD Registers (rev. 0xb1)
ppb5 at pci0 dev 28 function 0: Intel 63xxESB PCI Express Port #1 (rev. 0x09)
pci6 at ppb5 bus 6
ppb5: added to list as bus 6
pci6: i/o space, memory space enabled
wm2 at pci6 dev 0 function 0: Intel PRO/1000 PT (82571EB), rev. 6
wm2: interrupting at ioapic0 pin 16, event channel 3
wm2: PCI-Express bus
wm2: 65536 word (16 address bits) SPI EEPROM
wm2: Ethernet address 00:15:17:6d:4b:ae
igphy0 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm3 at pci6 dev 0 function 1: Intel PRO/1000 PT (82571EB), rev. 6
ioapic0: int17 1a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0> 
ff000000<target=ff>
wm3: interrupting at ioapic0 pin 17, event channel 6
wm3: PCI-Express bus
wm3: 65536 word (16 address bits) SPI EEPROM
wm3: Ethernet address 00:15:17:6d:4b:af
igphy1 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci0: interrupting at ioapic0 pin 17, event channel 6
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci1: interrupting at ioapic0 pin 19, event channel 5
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci2: interrupting at ioapic0 pin 18, event channel 4
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 63xxESB USB UHCI Controller (rev. 0x09)
uhci3: interrupting at ioapic0 pin 16, event channel 3
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 63xxESB USB EHCI Controller (rev. 0x09)
ehci0: interrupting at ioapic0 pin 17, event channel 6
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb6 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd9)
pci7 at ppb6 bus 7
ppb6: added to list as bus 7
pci7: i/o space, memory space enabled
vga0 at pci7 dev 1 function 0: ATI Technologies ES1000 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 63xxESB LPC Interface Bridge (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
ioapic0: int14 990<vector=90,delmode=1,logical,dest=0> ff000000<target=ff>
piixide0: primary channel interrupting at ioapic0 pin 14, event channel 7
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 631xESB/632xESB Serial ATA Controller (rev. 0x09)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19, event channel 5 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
Intel 63xxESB SMBus Controller (SMBus serial bus, revision 0x09) at pci0 dev 31 
function 3 not configured
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
ioapic0: int3 930<vector=30,delmode=1,logical,dest=0> ff000000<target=ff>
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
ioapic0: int1 928<vector=28,delmode=1,logical,dest=0> ff000000<target=ff>
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 10
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
xenbus0: using event channel 11
sd0 at scsibus0 target 0 lun 0: <Areca, ASLAN, R001> disk fixed
atapibus0 at atabus0: 2 targets
sd0: 61035 MB, 32552 cyl, 8 head, 480 sec, 512 bytes/sect x 124999680 sectors
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
sd1 at scsibus0 target 0 lun 1: <Areca, KYYHKY, R001> disk fixed
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8178, , PZ16> cdrom removable
sd1: 208 GB, 56966 cyl, 16 head, 480 sec, 512 bytes/sect x 437498880 sectors
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
sd2 at scsibus0 target 0 lun 2: <Areca, XP, R001> disk fixed
sd2: 119 GB, 43402 cyl, 12 head, 480 sec, 512 bytes/sect x 249999360 sectors
sd3 at scsibus0 target 0 lun 3: <Areca, MUIKKU, R001> disk fixed
sd3: 80107 MB, 42724 cyl, 8 head, 480 sec, 512 bytes/sect x 164060160 sectors
sd4 at scsibus0 target 0 lun 4: <Areca, KARHU, R001> disk fixed
sd4: 298 GB, 54253 cyl, 24 head, 480 sec, 512 bytes/sect x 624998400 sectors
sd5 at scsibus0 target 0 lun 5: <Areca, PUB, R001> disk fixed
sd5: 119 GB, 43402 cyl, 12 head, 480 sec, 512 bytes/sect x 249999360 sectors
sd6 at scsibus0 target 0 lun 6: <Areca, MEDIA, R001> disk fixed
sd6: 4705 GB, 81573 cyl, 252 head, 480 sec, 512 bytes/sect x 9867174912 sectors
sd6: mbr partition exceeds disk size
sd6: GPT GUID: c1349a02-e045-11dc-96ed-003048928bca
dk0 at sd6: c1349a16-e045-11dc-96ed-003048928bca
dk0: 9867174845 blocks at 34, type: ffs
sd7 at scsibus0 target 0 lun 7: <Areca, BACKUP, R001> disk fixed
sd7: 931 GB, 59838 cyl, 68 head, 480 sec, 512 bytes/sect x 1953124864 sectors
uhidev0 at uhub4 port 7 configuration 1 interface 0
uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 7 configuration 1 interface 1
uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for RAID components...
boot device: sd0
root on sd0a dumps on sd0b
dump_misc_init: max_paddr = 0x20000000
init: copying out path `/sbin/init' 11
wsdisplay0: screen 4 added (80x25, vt100 emulation)

And finally, qemu-dm-winxp.log:

domid: 18
qemu: the number of cpus is 1
qemu: could not open vbd '/local/domain/18/device/vbd/768/phantom_vbd' or hard 
disk image '/dev/sd2e' (drv 'phy' format 'raw')
Watching /local/domain/0/device-model/18/logdirty/next-active
Watching /local/domain/0/device-model/18/command
xs_read(): vncpasswd get error. 
/vm/1812af8e-463b-ac02-0f43-cd75d0e0db4a/vncpasswd.
qemu_map_cache_init nr_buckets = 4000 size 196608
shared page at pfn 3fffe
buffered io page at pfn 3fffc
Time offset set 7200
Register xen platform.
Done register platform.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0


Here's also my winxp config file (comments removed):

kernel = "/usr/pkg/lib/xen/boot/hvmloader"
builder='hvm'
memory = 1024
pae = 1
name = "winxp"
vif = [ 'mac=00:0d:10:80:03:00, bridge=bridge0, type=ioemu, model=pcnet' ]
disk = [ 'phy:/dev/sd2e,ioemu:hda,w' ]
device_model = '/usr/pkg/libexec/qemu-dm'
boot='c'
vnc = 1
usb=1
usbdevice='tablet'
localtime=1


  -jm



Home | Main Index | Thread Index | Old Index