Re: still broken, but majorly advanced USIII/schizo work commited

[Jochen Kunz <jkunz%unixag-kl.fh-kl.de@localhost>]

On Sun, 29 Nov 2009 10:39:38 +1100
matthew green <mrg%eterna.com.au@localhost> wrote:

> you can try using the new added "SCHIZO" file to test out if you like,
I gave it a run on my V240. See below. Thanks for working on this.
The V240 is such a nice machine to run NetBSD on. ;-)
Anything I can do to help?

Loaded initial symtab at 0x18bc8a0, strtab at 0x193ca10, # entries 21760
consinit()
stdin node = f00a7a40
stdout package = f00a7a40
buffer @ 0x1c05ca0
console is /pci@1e,600000/isa@7/serial@0,3f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.22 (SCHIZO) #0: Mon Nov 30 18:04:09 CET 2009
        jkunz@MissSophie:/datengrab/src/NetBSD/build/SCHIZO
total memory = 4096 MB
avail memory = 4010 MB
mainbus0 (root): SUNW,Sun-Fire-V240 (Sun Fire V240): hostid 
cpu at mainbus0 not configured
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1002 MHz, UPA id 1
cpu0: 128K instruction (32 b/l), 256K data (32 b/l), 4096K external (64 b/l)
memory-controller at mainbus0 not configured
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 4000ff00000: "Tomatillo", version 4, ign 780, bus A 0 
to 0
schizo1: DVMA map: c0000000 to e0000000
IOTSB: 479a000 to 481a000
intr_establish: intr reused 7b0
intr_establish: intr reused 7b1
intr_establish: intr reused 7b4
pci1 at schizo1
ebus0 at pci1 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
flashprom at ebus0 addr 0-fffff, 290-290 not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p
i2c at ebus0 addr 320-321 ipl 46 not configured
power at ebus0 addr 800-82f ipl 32 not configured
com0 at ebus0 addr 3f8-3ff ipl 44: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 44intr_establish: intr reused 7ac
: ns16550a, working fifo
rmc-comm at ebus0 addr 3e8-3ef ipl 44 not configured
alipm0 at pci1 dev 6 function 0: 223KHz clock
iic0 at alipm0: I2C bus
admtemp0 at iic0 addr 0x18: ADM1021 or compatible environmental sensor
: cannot get control register
ohci0 at pci1 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0
x03)
ohci0: interrupting at ivec 7a7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0x
c4)
aceride0: using ivec 1f98 for native-PCI interrupt
atabus0 at aceride0 channel 0
atabus1 at aceride0 channel 1
schizo2 at mainbus0: addr 4000e600000: "Tomatillo", version 4, ign 700, bus A 0 
to 0
schizo2: DVMA map: c0000000 to e0000000
IOTSB: 4894000 to 4914000
pci2 at schizo2
Symbios Logic 53c1010 (66MHz) (SCSI mass storage, revision 0x01) at pci2 dev 2 f
unction 0 not configured
Symbios Logic 53c1010 (66MHz) (SCSI mass storage, revision 0x01) at pci2 dev 2 f
unction 1 not configured
schizo3 at mainbus0: addr 4000ef00000: "Tomatillo", version 4, ign 740, bus B 0 
to 0
schizo3: DVMA map: c0000000 to e0000000
IOTSB: 4966000 to 49e6000
intr_establish: intr reused 730
intr_establish: intr reused 731
intr_establish: intr reused 734
pci3 at schizo3
bge2 at pci3 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
bge2: interrupting at ivec 375c
bge2: firmware handshake timed out, val = 4b657654
bge2: RX CPU self-diagnostics failed!
bge2: chip initialization failed
bge3 at pci3 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
bge3: interrupting at ivec 375d
bge3: firmware handshake timed out, val = 4b657654
bge3: RX CPU self-diagnostics failed!
bge3: chip initialization failed
pcons at mainbus0 not configured
No counter-timer -- using %tick at 1002MHz as system clock.
Using %tick -- intr in 10020000 cycles
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Kernelized RAIDframe activated
root on bge0
mountroot: trying smbfs...
mountroot: trying nfs...
nfs_boot: 'bge0' not found
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying cd9660...
Supported file systems: union umap tmpfs smbfs ptyfs procfs portal overlay null 
nfs msdos mfs lfs kernfs ffs fdesc cd9660
no file system for bge0
cannot mount root, error = 79
root device (default bge0): 

-- 


tschüß,
       Jochen

Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/