Re: Anybody have MIRABOX working?

[Jeff Rizzo <riz%tastylime.net@localhost>]

It was brought to my attention that some changes were made over the 
weekend, and my MIRABOX is working a lot better!  No network, but I can 
actually get to multiuser now:


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.1 (MIRABOX) #6: Wed Sep  3 18:56:48 PDT 2014
riz%cassava.tastylime.net@localhost:/scratch/evbarm7/obj/sys/arch/evbarm/compile/MIRABOX
total memory = 1024 MB
avail memory = 1009 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.99.1/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 1000 MHz Sheeva 88SV581x rev 1 (Marvell V core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x1141111 [1]=0x13112111 [2]=0x21232031 [3]=0x11112131, 
[4]=0x10142, [5]=0
cpu0: mmfr: [0]=0x1100003 [1]=0x40000000 [2]=0x1220000 [3]=0x211
cpu0: pfr: [0]=0x1031 [1]=0x1
cpu0: 32KB/32B 4-way L1 PIPT Instruction cache
cpu0: 32KB/32B 8-way write-back-locking-C L1 VIPT Data cache
vfp0 at cpu0: VFP3, rounding, exceptions, NaN propagation
vfp0: mvfr: [0]=0x10111221 [1]=0x10
mvsoc0 at mainbus0: Marvell MV6710 Rev. A1  Armada 370
mvsoc0: CPU Clock 1000.000 MHz  SysClock 1000.000 MHz  TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 37: Marvell SoC Timer
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 41: ns16550a, working fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 42: ns16550a, working fifo
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317 irq 50: Marvell SoC 
Real Time Clock
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 31: Marvell TWSI 
controller
iic0 at gttwsi0: I2C bus
gttwsi0: unexpected status 0x20: expect 0x18
gttwsi1 at mvsoc0 unit 1 offset 0x11100-0x111ff irq 32: Marvell TWSI 
controller
iic1 at gttwsi1: I2C bus
gttwsi1: unexpected status 0xf8: expect 0x18
gtidmac at mvsoc0 unit 0 not configured
ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 45: Marvell USB 2.0 
Interface
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci1 at mvsoc0 unit 1 offset 0x51000-0x51fff irq 46: Marvell USB 2.0 
Interface
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 58: Marvell PCI 
Express Interface
pci0 at mvpex0
pci0: i/o space, memory space enabled
vendor 0x11ab product 0x6710 (miscellaneous memory, revision 0x01) at 
pci0 dev 0 function 0 not configured
mvsoc0: mvpex1 clock disabled
mvsata0 at mvsoc0 unit 0 offset 0xa0000-0xa7fff irq 55: Marvell 
Serial-ATA Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
mvspi0 at mvsoc0 unit 0 offset 0x10600-0x1064f irq 30: Marvell SPI 
controller
spi0 at mvspi0: SPI bus
m25p0 at spi0 slave 0: unknown or unsupported device
mvspi1 at mvsoc0 unit 1 offset 0x10600-0x1064f irq 30: Marvell SPI 
controller
spi1 at mvspi1: SPI bus
mvsdio0 at mvsoc0 unit 0 offset 0xd4000-0xe3fff irq 54: Marvell Secure 
Digital Input/Output Interface
sdmmc0 at mvsdio0
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit 
Ethernet Controller
mvgbe at mvgbec0 port 0 not configured
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit 
Ethernet Controller
mvgbe at mvgbec1 port 0 not configured
mvcesa0 at mvsoc0 unit 0 offset 0x9d000-0x9dfff irq 48: Marvell 
Cryptographic Engines and Security Accelerator
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mvsoctmr0" frequency 1000000000 Hz quality 100
uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
"Marvell, 802.11 SDIO ID: 20, " (manufacturer 0x2df, product 0x9118) at 
sdmmc0 function 1 not configured
"Marvell, 802.11 SDIO ID: 20, " (manufacturer 0x2df, product 0x9118) at 
sdmmc0 function 2 not configured
"Marvell, 802.11 SDIO ID: 20, " (manufacturer 0x2df, product 0x9118) at 
sdmmc0 function 3 not configured
uhub2 at uhub0 port 1: vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 
2.00/1.11, addr 2
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Generic USB Storage, rev 2.00/94.51, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9451> disk 
removable
sd0: drive offline
umass1 at uhub2 port 2 configuration 1 interface 0
umass1: Generic USB Storage, rev 2.00/94.51, addr 4
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Generic, STORAGE DEVICE, 9451> disk 
removable
sd1: fabricating a geometry
sd1: 7580 MB, 7580 cyl, 64 head, 32 sec, 512 bytes/sect x 15523840 sectors
boot device: <unknown>
root device: sd1
dump device (default sd1b):
file system (default generic):
root on sd1a dumps on sd1b
sd1: fabricating a geometry
root file system type: ffs
init path (default /sbin/init):
init: trying /sbin/init
uid 12, pid 1748, command master, on /: file system full
uid 0, pid 1251, command makemandb, on /: file system full