Re: USB-3 sorta working on PogoPlug Series 4, MMC still not working

[Lwazi <lwazidub%gmail.com@localhost>]

On Fri, Mar 21, 2014 at 6:45 PM, John Klos <john%ziaspace.com@localhost> wrote:
> Hi,
>
>
>> This is the command I use to boot my pogoplug mobile:
>>
>> mw f1010004 11113311; mw f1010008 551111; tftpboot 0x800000
>> netbsd-SHEEVAPLUG.ub; bootm 0x800000
>
>
> That works great on three PogoPlug Mobiles so far, but on a PogoPlug Series
> 4, every time it boots I get this with the same card as I've been using on
> the Mobiles:
>
> ld0 at sdmmc0: <0x1d:0x4144:SD   :0x10:0x25700910:0x024>
> ld0: 7646 MB, 3883 cyl, 64 head, 63 sec, 512 bytes/sect x 15659008 sectors
> ld0: 4-bit width, bus clock 50.000 MHz
> boot device: <unknown>
> root on ld0a dumps on ld0b
> mvsdio0: CRC Error (0x20)
> ld0a: error reading fsbn 5680 of 5680-5685 (ld0 bn 5680; cn 1 tn 26 sn 10)
> cannot mount root, error = 5
> root device (default ld0a):
>
> Any attempts to use the SD card from within NetBSD give:
>
> disklabel /dev/ld0
> ld0c: error reading fsbn 6 (ld0 bn 6; cn 0 tn 0 sn 6)
> ld0: filecore boot block I/O error
>
> I tried with other cards, too, and got the same results:
>
> ld0 at sdmmc0: <0x03:0x5344:SU16G:0x80:0x20f79a72:0x032>
> ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors
> ld0: 4-bit width, bus clock 50.000 MHz
>
> Any ideas?
>
See this thread http://mail-index.netbsd.org/port-arm/2012/10/25/msg001548.html