USB-3 sorta working on PogoPlug Series 4, MMC still not working

[John Klos <john%ziaspace.com@localhost>]

Hi,

It seems that USB-3 works at least a little on PogoPlug Series 4 with:
xhci*   at pci? dev ? function ?        # eXtensible Host Controller
usb*    at xhci?

We still need these, though:
no mvsdio*
no sdmmc*
no ld*

If mvsdio is included, we get a neverending loop of:
mvsdio0: Command Error (0xc)

Any ideas how to fix mvsdio?

Thanks,
John



NAND read: device 0 offset 0x800000, size 0x500000

Reading data from 0xcff800 -- 100% complete.
 5242880 bytes read: OK
## Booting image at 00800000 ...
   Image Name:   NetBSD/sheevaplug 6.99.36
   Created:      2014-03-13   6:37:43 UTC
   Image Type:   ARM NetBSD Kernel Image (uncompressed)
   Data Size:    4445184 Bytes =  4.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Transferring control to NetBSD stage-2 loader (at address 00008000) ...

NetBSD/evbarm (sheevaplug) booting ...
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.36 (POGO) #0: Thu Mar 13 06:37:41 UTC 2014

john%chi.ziaspace.com@localhost:/usr/current/obj-evbarm/sys/arch/evbarm/compile/POGO
total memory = 128 MB
avail memory = 120 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
mainbus0 (root)
cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 16KB/32B 4-way L1 VIVT Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 VIVT Data cache
mvsoc0 at mainbus0: Marvell 88F619x Rev. A1  Kirkwood
mvsoc0: CPU Clock 800.000 MHz  SysClock 200.000 MHz  TClock 166.666 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC 
Timer
mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC 
General Purpose I/O Port Interface
mvsocgpp0: 36 gpio pins
mvsocgpp0: interrupts 96..103, intr 35
mvsocgpp0: interrupts 104..111, intr 36
mvsocgpp0: interrupts 112..119, intr 37
mvsocgpp0: interrupts 120..127, intr 38
mvsocgpp0: interrupts 128..135, intr 39
mvsocgpp0:   Data Out:                  0x0001c441
mvsocgpp0:   Data Out Enable Control:   0xcf004800
mvsocgpp0:   Data Blink Enable:         0x00400000
mvsocgpp0:   Data In Polarity:          0x00000000
mvsocgpp0:   Data In:                   0x09418000
mvsocgpp0:   Interrupt Cause:           0x00400000
mvsocgpp0:   Interrupt Mask:            0x00000000
mvsocgpp0:   Interrupt Level Mask:      0x00000000
mvsocgpp0:   High Data Out:             0x00000008
mvsocgpp0:   High Data Out Enable Ctrl: 0x00000005
mvsocgpp0:   High Blink Enable:         0x00000000
mvsocgpp0:   High Data In Polarity:     0x00000000
mvsocgpp0:   High Data In:              0x00000008
mvsocgpp0:   High Interrupt Cause:      0x00000000
mvsocgpp0:   High Interrupt Mask:       0x00000000
mvsocgpp0:   High Interrupt Level Mask: 0x00000000
gpio0 at mvsocgpp0: 36 pins
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time 
Clock
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working 
fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working 
fifo
ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 
Interface
usb0 at ehci0: USB revision 2.0
gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA 
Controller/XOR Engine
gtidmac0: XOR Engine 4 channels, intr 5...8
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI 
controller
iic0 at gttwsi0: I2C bus
mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell 
Cryptographic Engines and Security Accelerator
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet 
Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address 00:25:31:05:ef:94
makphy0 at mvgbe0 phy 0: Marvell 88E1116R Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
mvsoc0: mvgbec1 clock disabled
mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express 
Interface
pci0 at mvpex0
vendor 0x11ab product 0x6281 (miscellaneous memory, revision 0x03) at pci0 
dev 0 function 0 not configured
xhci0 at pci0 dev 1 function 0: vendor 0x1b73 product 0x1009 (rev. 0x02)
xhci0: interrupting at interrupt pin INTA#
usb1 at xhci0: USB revision 2.0
mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA 
Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
mvsdio at mvsoc0 unit 0 not configured
xhci0: port 1 status change
xhci0: port 2 status change
xhci0: xhci_new_device up 0xc23032e4 portno 0
xhci0: xhci_new_device hub 0xc2313b88
xhci0: xhci_new_device hub 0x0
xhci0: xhci_new_device rhport 0
xhci0: xhci_open addr 0 depth 0 port 0 speed 3
uhub0 at usb1: NetBSD xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
xhci0: xhci_open addr 0 depth 0 port 0 speed 3
uhub1 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
xhci0: root_hub 0x0
xhci0: port 1 status change
xhci0: hs port 1 status change
xhci0: xhci_new_device up 0xc2439ee0 portno 1
xhci0: xhci_new_device hub 0xc2313988
xhci0: xhci_new_device hub 0xc2313b88
xhci0: xhci_new_device hub 0x0
xhci0: xhci_new_device rhport 1
xhci0: xhci_open addr 0 depth 1 port 1 speed 3
xhci0: xhci_do_command input: 0x0000000000000000 0x00000000 0x00002400
xhci0: xhci_do_command output: 0x0000000000b2c000 0x01000000 0x01008401
xhci0: dcbaa 0xc8277008 dc 0000000000b30000 slot 1
xhci0: xhci_do_command input: 0x0000000000b31000 0x00000000 0x01002c00
xhci0: xhci_do_command output: 0x0000000000b2c010 0x01000000 0x01008401
xhci0: xhci_new_device device address 1
xhci0: xhci_new_device bMaxPacketSize 64
xhci0: xhci_update_ep0_mps
xhci0: xhci_do_command input: 0x0000000000b31000 0x00000000 0x01003400
xhci0: xhci_do_command output: 0x0000000000b2c020 0x01000000 0x01008401
xhci0: xhci_open addr 1 depth 1 port 1 speed 3
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Corsair Flash Voyager, rev 2.00/11.00, addr 1
xhci0: xhci_open addr 1 depth 1 port 1 speed 3
xhci0: xhci_configure_endpoint dci 4 (0x2)
xhci0: xhci_do_command input: 0x0000000000b31000 0x00000000 0x01003000
xhci0: xhci_do_command output: 0x0000000000b2c030 0x01000000 0x01008401
xhci0: xhci_open addr 1 depth 1 port 1 speed 3
xhci0: xhci_configure_endpoint dci 3 (0x81)
xhci0: xhci_do_command input: 0x0000000000b31000 0x00000000 0x01003000
xhci0: xhci_do_command output: 0x0000000000b2c040 0x01000000 0x01008401
scsibus0 at umass0: 2 targets, 1 lun per target
xhci0: port 2 status change
xhci0: hs port 2 status change
sd0 at scsibus0 target 0 lun 0: <Corsair, Flash Voyager, 1100> disk 
removable
sd0: 7648 MB, 15744 cyl, 16 head, 63 sec, 512 bytes/sect x 15663104 
sectors
xhci0: xhci_new_device up 0xc2439ef4 portno 2
xhci0: xhci_new_device hub 0xc2313888
xhci0: xhci_new_device hub 0xc2313b88
xhci0: xhci_new_device hub 0x0
xhci0: xhci_new_device rhport 2
xhci0: xhci_open addr 0 depth 1 port 2 speed 3
xhci0: xhci_do_command input: 0x0000000000000000 0x00000000 0x00002400
xhci0: xhci_do_command output: 0x0000000000b2c050 0x01000000 0x02008401
xhci0: dcbaa 0xc8277010 dc 0000000000b61000 slot 2
xhci0: xhci_do_command input: 0x0000000000b62000 0x00000000 0x02002c00
xhci0: xhci_do_command output: 0x0000000000b2c060 0x01000000 0x02008401
xhci0: xhci_new_device device address 2
xhci0: xhci_new_device bMaxPacketSize 64
xhci0: xhci_update_ep0_mps
xhci0: xhci_do_command input: 0x0000000000b62000 0x00000000 0x02003400
xhci0: xhci_do_command output: 0x0000000000b2c070 0x01000000 0x02008401
xhci0: xhci_open addr 2 depth 1 port 2 speed 3
axe0 at uhub0 port 2
axe0: Apple Computer Apple USB to Ethernet, rev 2.00/0.01, addr 2
axe0: failed to set configuration, err=TIMEOUT
boot device: <unknown>