Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one

To: Martin Husemann <martin%duskware.de@localhost>
Subject: Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
From: Will Senn <will.senn%gmail.com@localhost>
Date: Fri, 9 Aug 2024 12:01:19 -0500

On 8/9/24 10:33, Martin Husemann wrote:

On Fri, Aug 09, 2024 at 10:05:30AM -0500, Will Senn wrote:

I see an endless parade of:
piixide0:1:0: lost interrupt
[MM.NN] type: atapi tc_bcount: 0 tc_skip: 0

We need full dmesg output (or a copy of /var/run/dmesg.boot).
Is there a CD/DVD medium in whatever kind of drive it has?

If you can get into the firmware setup, check if there is an option to
not use piixide for the sata controllers. Most devices offer ahci
as an alternative, which usually is a lot better.

Martin

Well, that was frustrating, but I got the file... ^C a few times and then put up with super slow nonsense - keyboard missed keypresses it was so slow, but I typed really slow and was able to get the dmesg.boot, below. As for controller's, only ATA was an option (this is a 10+ year old, somebody bought it at walmart computer) - perfect for playing with netbsd, if I can get past this :).

dmesg.boot:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California. All rights reserved.

NetBSD 10.0_STABLE (GENERIC) #0: Tue Jul 30 15:56:59 UTC 2024
    mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3990 MB
avail memory = 3833 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F0450 000024 (v02 DELL )
ACPI: XSDT 0x00000000DA514078 00006C (v01 DELL   WN09     01072009 AMI 00010013)
ACPI: FACP 0x00000000DA51E328 0000F4 (v04 DELL   WN09     01072009 AMI 00010013)
ACPI: DSDT 0x00000000DA514170 00A1B8 (v02 DELL   WN09     00000000 INTL 20051117)
ACPI: FACS 0x00000000DA52CF80 000040
ACPI: APIC 0x00000000DA51E420 000062 (v03 DELL   WN09     01072009 AMI 00010013)
ACPI: MCFG 0x00000000DA51E488 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
ACPI: SLIC 0x00000000DA51E4C8 000176 (v01 DELL   WN09     01072009 AMI 00010013)
ACPI: HPET 0x00000000DA51E640 000038 (v01 DELL   WN09     01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA51E678 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA51EAD8 000758 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DA51F230 000A92 (v01 PmRef CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000DA51FCC8 000038 (v00 DELL   WN09     01072009 AMI 00010013)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Pentium(R) CPU G620T @ 2.20GHz, id 0x206a7
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Pentium(R) CPU G620T @ 2.20GHz, id 0x206a7
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <DELL , WN09   ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9684FD97D008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF968514158C08 000303 (v01 PmRef ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9684FD92C248 000119 (v01 PmRef ApCst    00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CIR (ITE8713) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 86.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 86.0 C, passive 86.0 C, passive cooling
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
ACPI: Enabled 5 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (desktop) Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge (desktop) GI1 Integrated Graphics Device (rev. 0x09)
Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC662
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb5)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 2: Intel 6 Series Chipset Family PCIe Root Port 3 (rev. 0xb5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Atheros Communications AR9485 Wireless LAN (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 5: Intel 6 Series Chipset Family PCIe Root Port 6 (rev. 0xb5)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
re0: interrupting at msix1 vec 0
re0: RTL8168E/8111E-VL (0x2c80)
re0: Ethernet address 78:45:c4:01:2f:1b
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel H61 LPC (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 2: Intel 6 Series Serial ATA Controller (rev. 0x05)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
piixide1 at pci0 dev 31 function 5: Intel 6 Series Serial ATA Controller (rev. 0x05)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 80 us, pow   500 mW
acpicpu0: C3: FFH, lat 104 us, pow   350 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2200 MHz
acpicpu0: P1: FFH, lat 10 us, pow 32872 mW, 2100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 30785 mW, 2000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 29079 mW, 1900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 27071 mW, 1800 MHz
acpicpu0: P5: FFH, lat 10 us, pow 25435 mW, 1700 MHz
acpicpu0: P6: FFH, lat 10 us, pow 23510 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2195014000 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ubt0 at uhub3 port 2
ubt0: Atheros Communications (0x0cf3) Bluetooth USB Host Controller (0xe004), rev 1.10/0.01, addr 3
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: vendor 13fe (0x13fe) USB DISK 3.0 (0x5500), rev 2.10/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <, USB DISK 3.0, PMAP> disk removable
sd0: 15136 MB, 3798 cyl, 255 head, 32 sec, 512 bytes/sect x 30998528 sectors
sd0: GPT GUID: 9b08ebf1-6788-496b-84a2-b48c76061f38
dk0 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
dk1 at sd0: "e111059f-8b5f-4f47-bc7d-9ab899996565", 4853760 blocks at 264192, type: ffs
uhidev0 at uhub2 port 3 configuration 1 interface 0
uhidev0: Logitech (0x046d) Trackball (0xc404), rev 1.10/2.20, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uvideo0 at uhub3 port 4 configuration 1 interface 0: CN0554KP7248724KG3Z7A00 (0x0c45) Laptop_Integrated_Webcam_E4HD (0x6490), rev 2.00/22.08, addr 4
video0 at uvideo0: CN0554KP7248724KG3Z7A00 (0x0c45) Laptop_Integrated_Webcam_E4HD (0x6490), rev 2.00/22.08, addr 4
uhidev1 at uhub2 port 4 configuration 1 interface 0
uhidev1: DELL (0x413c) Dell USB Entry Keyboard (0x2107), rev 2.00/1.04, addr 5, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0: console keyboard
wd0 at atabus0 drive 0
wd0: <WDC WD5000AAKX-753CA1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: GPT GUID: 44ffba0a-5638-11ef-95eb-7845c4012f1b
dk2 at wd0: "efiboot0", 532480 blocks at 40, type: msdos
dk3 at wd0: "gptboot0", 1024 blocks at 532520, type: <unknown>
dk4 at wd0: "swap0", 4194304 blocks at 534528, type: swap
dk5 at wd0: "zfs0", 972044288 blocks at 4728832, type: zfs
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PLDS DVD+/-RW DS-8A8SH, YTVN95508124149LTA00, KD11> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
swwdog0: software watchdog initialized
boot device: sd0
root on dk1 dumps on dk4
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi2 vec 0 (i915drmkms0)
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xe0005000, size 1600x900, depth 32, stride 6400
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
entropy: best effort
dk5 at wd0 (zfs0) deleted
dk4 at wd0 (swap0) deleted
dk3 at wd0 (gptboot0) deleted
dk2 at wd0 (efiboot0) deleted
entropy: ready
syncing disks... 4 3 2 done
unmounted tmpfs on /tmp type tmpfs
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California. All rights reserved.

NetBSD 10.0_STABLE (GENERIC) #0: Tue Jul 30 15:56:59 UTC 2024
    mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3990 MB
avail memory = 3833 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F0450 000024 (v02 DELL )
ACPI: XSDT 0x00000000DA514078 00006C (v01 DELL   WN09     01072009 AMI 00010013)
ACPI: FACP 0x00000000DA51E328 0000F4 (v04 DELL   WN09     01072009 AMI 00010013)
ACPI: DSDT 0x00000000DA514170 00A1B8 (v02 DELL   WN09     00000000 INTL 20051117)
ACPI: FACS 0x00000000DA52CF80 000040
ACPI: APIC 0x00000000DA51E420 000062 (v03 DELL   WN09     01072009 AMI 00010013)
ACPI: MCFG 0x00000000DA51E488 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
ACPI: SLIC 0x00000000DA51E4C8 000176 (v01 DELL   WN09     01072009 AMI 00010013)
ACPI: HPET 0x00000000DA51E640 000038 (v01 DELL   WN09     01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA51E678 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA51EAD8 000758 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DA51F230 000A92 (v01 PmRef CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000DA51FCC8 000038 (v00 DELL   WN09     01072009 AMI 00010013)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Pentium(R) CPU G620T @ 2.20GHz, id 0x206a7
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Pentium(R) CPU G620T @ 2.20GHz, id 0x206a7
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <DELL , WN09   ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFD2864AF7D008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFD28661758C08 000303 (v01 PmRef ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFD2864AF2C248 000119 (v01 PmRef ApCst    00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CIR (ITE8713) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 86.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 86.0 C, passive 86.0 C, passive cooling
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
ACPI: Enabled 5 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (desktop) Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge (desktop) GI1 Integrated Graphics Device (rev. 0x09)
Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC662
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb5)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 2: Intel 6 Series Chipset Family PCIe Root Port 3 (rev. 0xb5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Atheros Communications AR9485 Wireless LAN (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 5: Intel 6 Series Chipset Family PCIe Root Port 6 (rev. 0xb5)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
re0: interrupting at msix1 vec 0
re0: RTL8168E/8111E-VL (0x2c80)
re0: Ethernet address 78:45:c4:01:2f:1b
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel H61 LPC (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 2: Intel 6 Series Serial ATA Controller (rev. 0x05)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
piixide1 at pci0 dev 31 function 5: Intel 6 Series Serial ATA Controller (rev. 0x05)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 80 us, pow   500 mW
acpicpu0: C3: FFH, lat 104 us, pow   350 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2200 MHz
acpicpu0: P1: FFH, lat 10 us, pow 32872 mW, 2100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 30785 mW, 2000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 29079 mW, 1900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 27071 mW, 1800 MHz
acpicpu0: P5: FFH, lat 10 us, pow 25435 mW, 1700 MHz
acpicpu0: P6: FFH, lat 10 us, pow 23510 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2195016000 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 4 ports with 4 removable, self powered
ubt0 at uhub3 port 2
ubt0: Atheros Communications (0x0cf3) Bluetooth USB Host Controller (0xe004), rev 1.10/0.01, addr 3
uhidev0 at uhub2 port 3 configuration 1 interface 0
uhidev0: Logitech (0x046d) Trackball (0xc404), rev 1.10/2.20, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 4 configuration 1 interface 0
uhidev1: DELL (0x413c) Dell USB Entry Keyboard (0x2107), rev 2.00/1.04, addr 4, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0: console keyboard
uvideo0 at uhub3 port 4 configuration 1 interface 0: CN0554KP7248724KG3Z7A00 (0x0c45) Laptop_Integrated_Webcam_E4HD (0x6490), rev 2.00/22.08, addr 4
video0 at uvideo0: CN0554KP7248724KG3Z7A00 (0x0c45) Laptop_Integrated_Webcam_E4HD (0x6490), rev 2.00/22.08, addr 4
wd0 at atabus0 drive 0
wd0: <WDC WD5000AAKX-753CA1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PLDS DVD+/-RW DS-8A8SH, YTVN95508124149LTA00, KD11> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi2 vec 0 (i915drmkms0)
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xe0005000, size 1600x900, depth 32, stride 6400
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
autoconfiguration error: piixide0:1:0: lost interrupt
    type: atapi tc_bcount: 0 tc_skip: 0
autoconfiguration error: piixide0:1:0: lost interrupt
    type: atapi tc_bcount: 0 tc_skip: 0
autoconfiguration error: piixide0:1:0: lost interrupt
    type: atapi tc_bcount: 0 tc_skip: 0
autoconfiguration error: piixide0:1:0: lost interrupt
    type: atapi tc_bcount: 0 tc_skip: 0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
autoconfiguration error: piixide0:1:0: lost interrupt
    type: atapi tc_bcount: 0 tc_skip: 0

Follow-Ups:
- Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
  - From: Martin Husemann

References:
- piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
  - From: Will Senn
- Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
  - From: Martin Husemann

Prev by Date: Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
Next by Date: Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
Previous by Thread: Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
Next by Thread: Re: piixide0:1:0: lost interrupt on my Inspiron 2020 all-in-one
Indexes:

Home | Main Index | Thread Index | Old Index