Re: Kernel crash AMD64 NetBSD10 install on Celeron

[xuser <xuser%insomnia247.nl@localhost>]

I've seen that bug myself but i don't think anyone filed a bug report for 
it.

For me it only happens when booting on a dell laptop with nvidia.


On Sun, 28 Jul 2024, Joel wrote:

> Hello -- the machine is branded as a Protectli Vault FW2B with HDMI. I 
> recently had OpenBSD 7.5 running on it as a router. Below is the stack trace, 
> followed by the full serial console output. I booted from a USB AMD64 image I 
> downloaded today.
> Is this a known issue? If not I'll be happy to file a bug.
>
> Thanks - Joel
>
> db{1}> trace
> mutex_vector_enter() at netbsd:mutex_vector_enter+0x82
> intel_rps_mark_interactive() at netbsd:intel_rps_mark_interactive+0x1e
> intel_prepare_plane_fb() at netbsd:intel_prepare_plane_fb+0x1ab
> drm_atomic_helper_prepare_planes() at 
> netbsd:drm_atomic_helper_prepare_planes+0x
> 8f
> intel_atomic_commit() at netbsd:intel_atomic_commit+0xaf
> drm_client_modeset_commit_atomic() at 
> netbsd:drm_client_modeset_commit_atomic+0x
> 1f4
> drm_client_modeset_commit_force() at 
> netbsd:drm_client_modeset_commit_force+0x4c
>
> drm_fb_helper_restore_fbdev_mode_unlocked() at 
> netbsd:drm_fb_helper_restore_fbde
> v_mode_unlocked+0x55
> drmfb_genfb_setmode() at netbsd:drmfb_genfb_setmode+0x17
> genfb_attach() at netbsd:genfb_attach+0x176
> drmfb_attach() at netbsd:drmfb_attach+0x22d
> intelfb_attach_task() at netbsd:intelfb_attach_task+0x4e
> i915drmkms_attach_real() at netbsd:i915drmkms_attach_real+0xaa
> config_mountroot_thread() at netbsd:config_mountroot_thread+0x37
> db{1}>
>
>
> > consdev com0,115200
> Welcome to the NetBSD/amd64 10.0 installation image
> ===============================================================================
>
> If you encounter a problem while booting, report a bug at
> https://www.NetBSD.org/.
> > boot
> 21288680+782888+1314264 [939258+1396248+1023001]=0x1b34a30
> [   1.0000000] cpu_rng: rdrand
> [   1.0000000] entropy: ready
> [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
> [   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 
> 2013,
> [   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 
> 2023,
> [   1.0000000]     2024
> [   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
> [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
> [   1.0000000]     The Regents of the University of California. All rights 
> reserved.
>
> [   1.0000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
> [   1.0000000] 
> mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
> [   1.0000000] total memory = 8101 MB
> [   1.0000000] avail memory = 7811 MB
> [   1.0000040] efi: systbl at pa abba9f18
> [   1.0000040] mainbus0 (root)
> [   1.0000040] ACPI: RSDP 0x00000000AB4BB000 000024 (v02 ALASKA)
> [   1.0000040] ACPI: XSDT 0x00000000AB4BB080 00007C (v01 ALASKA A M I    
> 01072009 AMI  00010013)
> [   1.0000040] ACPI: FACP 0x00000000AB4C6F18 00010C (v05 ALASKA A M I    
> 01072009 AMI  00010013)
> [   1.0000040] ACPI: DSDT 0x00000000AB4BB190 00BD85 (v02 ALASKA A M I    
> 01072009 INTL 20120913)
> [   1.0000040] ACPI: FACS 0x00000000AB8A7E80 000040
> [   1.0000040] ACPI: APIC 0x00000000AB4C7028 000068 (v03 ALASKA A M I    
> 01072009 AMI  00010013)
> [   1.0000040] ACPI: FPDT 0x00000000AB4C7090 000044 (v01 ALASKA A M I    
> 01072009 AMI  00010013)
> [   1.0000040] ACPI: FIDT 0x00000000AB4C70D8 00009C (v01 ALASKA A M I    
> 01072009 AMI  00010013)
> [   1.0000040] ACPI: MCFG 0x00000000AB4C7178 00003C (v01 ALASKA A M I    
> 01072009 MSFT 00000097)
> [   1.0000040] ACPI: SSDT 0x00000000AB4C71B8 000763 (v01 PmRef CpuPm    
> 00003000 INTL 20061109)
> [   1.0000040] ACPI: SSDT 0x00000000AB4C7920 000290 (v01 PmRef Cpu0Tst  
> 00003000 INTL 20061109)
> [   1.0000040] ACPI: SSDT 0x00000000AB4C7BB0 00017A (v01 PmRef ApTst    
> 00003000 INTL 20061109)
> [   1.0000040] ACPI: UEFI 0x00000000AB4C7D30 000042 (v01 ALASKA A M I    
> 00000000      00000000)
> [   1.0000040] ACPI: LPIT 0x00000000AB4C7D78 000104 (v01 ALASKA A M I    
> 00000005 MSFT 0100000D)
> [   1.0000040] ACPI: CSRT 0x00000000AB4C7E80 00014C (v00 INTEL LANFORDC 
> 00000005 MSFT 0100000D)
> [   1.0000040] ACPI: 4 ACPI AML tables successfully acquired and loaded
> [   1.0000040] ioapic0 at mainbus0 apid 1
> [   1.0000040] cpu0 at mainbus0 apid 0
> [   1.0000040] cpu0: Intel(R) Celeron(R) CPU  J3060  @ 1.60GHz, id 0x406c4
> [   1.0000040] cpu0: node 0, package 0, core 0, smt 0
> [   1.0000040] acpi0 at mainbus0: Intel ACPICA 20221020 [139/1047][   
> 1.0000040] ACPI: Dynamic OEM Table Load:
> [   1.0000040] ACPI: SSDT 0xFFFFF9D600E19808 0006B8 (v01 PmRef Cpu0Ist  
> 00003000 INTL 20061109)
> [   1.0000040] ACPI: Dynamic OEM Table Load:
> [   1.0000040] ACPI: SSDT 0xFFFFF9D73F14E408 0003A5 (v01 PmRef Cpu0Cst  
> 00003001 INTL 20061109)
> [   1.0000040] ACPI: Dynamic OEM Table Load:
> [   1.0000040] ACPI: SSDT 0xFFFFF9D600E101C8 00015F (v01 PmRef ApIst    
> 00003000 INTL 20061109)
> [   1.0000040] ACPI: Dynamic OEM Table Load:
> [   1.0000040] ACPI: SSDT 0xFFFFF9D600E27348 00008D (v01 PmRef ApCst    
> 00003000 INTL 20061109)
> [   1.0000040] acpi0: fixed power button present
> [   1.0195526] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
> [   1.0195526] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
> [   1.0195526] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output 
> Device
> [   1.0195526] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output 
> Device
> [   1.0195526] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output 
> Device
> [   1.0195526] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output 
> Device
> [   1.0195526] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output 
> Device
> [   1.0195526] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output 
> Device
> [   1.0195526] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output 
> Device
> [   1.0195526] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output 
> Device
> [   1.0195526] acpiout8 at acpivga0 (DD1F, 0x0400): ACPI Display Output 
> Device
> [   1.0195526] acpiout9 at acpivga0 (ISP0, 0x22b8): ACPI Display Output 
> Device
> [   1.0195526] FWHD (INT0800) at acpi0 not configured
> [   1.0195526] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 
> 0
> [   1.0195526] com0 at acpi0 (UAR1, PNP0501-0): io 0x3f8-0x3ff irq 4
> [   1.0195526] com: ns16550a, 16-byte FIFO
> [   1.0195526] com0: console
> [   1.0195526] BTH1 (BCM2E64) at acpi0 not configured
> [   1.0195526] GPS1 (BCM4752) at acpi0 not configured
> [   1.0195526] SHUB (SMO91D0) at acpi0 not configured
> [   1.0195526] STRB (INTCF1C) at acpi0 not configured
> [   1.0195526] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> [   1.0195526] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
> [   1.0195526] acpitz0 at acpi0 (TZ01): cpu0 cpu1
> [   1.0195526] acpitz0: active cooling level 0: 110.0C
> [   1.0195526] ACPI: Enabled 5 GPEs in block 00 to 3F
> [   1.0195526] pci0 at mainbus0 bus 0: configuration mode 1
> [   1.0195526] pchb0 at pci0 dev 0 function 0: Intel Braswell Soc Transaction 
> Router (rev. 0x35)
> [   1.0195526] i915drmkms0 at pci0 dev 2 function 0: Intel HD Graphics (rev. 
> 0x35)
> [   1.0195526] ahcisata0 at pci0 dev 19 function 0: Intel Braswell AHCI (rev. 
> 0x35)
> [   1.0195526] ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 
> 0xd734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SNCQ,S64A>
> [   1.0195526] ahcisata0: interrupting at msi0 vec 0
> [   1.0195526] atabus0 at ahcisata0 channel 0
> [   1.0195526] atabus1 at ahcisata0 channel 1
> [   1.0195526] xhci0 at pci0 dev 20 function 0: Intel Braswell xHCI (rev. 
> 0x35)
> [   1.0195526] xhci0: interrupting at msi1 vec 0
> [   1.0195526] usb0 at xhci0: USB revision 3.0
> [   1.0195526] usb1 at xhci0: USB revision 2.0
> [   1.0195526] Intel Braswell TXE (miscellaneous crypto, revision 0x35) at 
> pci0 dev 26 function 0 not configured
> [   1.0195526] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
> [   1.0195526] hdaudio0: interrupting at msi2 vec 0
> [   1.0195526] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
> [   1.0195526] hdafg0 at hdaudio0: Realtek ALC662
> [   1.0195526] hdafg0: DAC00 2ch: HP Out [Jack]
> [   1.0195526] hdafg0: ADC01 2ch: Mic In [Jack]
> [   1.0195526] hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 
> 192000Hz PCM16 PCM20 PCM24 AC3
> [   1.0195526] audio0 at hdafg0: playback, capture, full duplex, independent
> [   1.0195526] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for 
> playback
> [   1.0195526] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for 
> recording
> [   1.0195526] spkr0 at audio0: PC Speaker (synthesized) [80/1047][   
> 1.0195526] wsbell at spkr0 not configured
> [   1.0195526] hdafg1 at hdaudio0: Intel product 2883
> [   1.0195526] hdafg1: DP00 8ch: Digital Out [Jack]
> [   1.0195526] hdafg1: DP01 8ch: Digital Out [Jack]
> [   1.0195526] hdafg1: DP02 8ch: Digital Out [Jack]
> [   1.0195526] hdafg1: 8ch/0ch 48000Hz PCM16*
> [   1.0195526] audio1 at hdafg1: playback, capture, full duplex, independent
> [   1.0195526] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for 
> playback
> [   1.0195526] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for 
> recording
> [   1.0195526] spkr1 at audio1: PC Speaker (synthesized)
> [   1.0195526] wsbell at spkr1 not configured
> [   1.0195526] ppb0 at pci0 dev 28 function 0: Intel Braswell PCIe (rev. 
> 0x35)
> [   1.0195526] ppb0: PCI Express capability version 2 <Root Port of PCI-E 
> Root Complex> x1 @ 2.5GT/s
> [   1.0195526] pci1 at ppb0 bus 1
> [   1.0195526] wm0 at pci1 dev 0 function 0: I211 Ethernet (COPPER) (rev. 
> 0x03)
> [   1.0195526] wm0: for TX and RX interrupting at msix3 vec 0 affinity to 0
> [   1.0195526] wm0: for TX and RX interrupting at msix3 vec 1 affinity to 1
> [   1.0195526] wm0: for LINK interrupting at msix3 vec 2
> [   1.0195526] wm0: Ethernet address 00:e0:67:16:e5:c2
> [   1.0195526] wm0: Copper
> [   1.0195526] makphy0 at wm0 phy 1: I210 10/100/1000 media interface, rev. 0
> [   1.0195526] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
> 1000baseT, 1000baseT-FDX, auto
> [   1.0195526] ppb1 at pci0 dev 28 function 1: Intel Braswell PCIe (rev. 
> 0x35)
> [   1.0195526] ppb1: PCI Express capability version 2 <Root Port of PCI-E 
> Root Complex> x1 @ 2.5GT/s
> [   1.0195526] pci2 at ppb1 bus 2
> [   1.0195526] wm1 at pci2 dev 0 function 0: I211 Ethernet (COPPER) (rev. 
> 0x03)
> [   1.0195526] wm1: for TX and RX interrupting at msix4 vec 0 affinity to 0
> [   1.0195526] wm1: for TX and RX interrupting at msix4 vec 1 affinity to 1
> [   1.0195526] wm1: for LINK interrupting at msix4 vec 2
> [   1.0195526] wm1: Ethernet address 00:e0:67:16:e5:c3
> [   1.0195526] wm1: Copper
> [   1.0195526] makphy1 at wm1 phy 1: I210 10/100/1000 media interface, rev. 0
> [   1.0195526] makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
> 1000baseT, 1000baseT-FDX, auto
> [   1.0195526] pcib0 at pci0 dev 31 function 0: Intel Braswell PCU LPC (rev. 
> 0x35)
> [   1.0195526] ichsmb0 at pci0 dev 31 function 3: Intel Braswell PCU SMBus 
> (rev. 0x35)
> [   1.0195526] ichsmb0: interrupting at ioapic0 pin 18
> [   1.0195526] iic0 at ichsmb0: I2C bus
> [   1.0195526] isa0 at pcib0
> [   1.0195526] pcppi0 at isa0 port 0x61
> [   1.0195526] spkr2 at pcppi0: PC Speaker
> [   1.0195526] wsbell at spkr2 not configured
> [   1.0195526] midi0 at pcppi0: PC speaker
> [   1.0195526] sysbeep0 at pcppi0
> [   1.0195526] attimer1: attached to pcppi0
> [   1.0195526] acpicpu0 at cpu0: ACPI CPU
> [   1.0195526] coretemp0 at cpu0: thermal sensor, 1 C resolution
> [   1.0195526] acpicpu1 at cpu1: ACPI CPU
> [   1.0195526] coretemp1 at cpu1: thermal sensor, 1 C resolution
> [   1.5567094] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 
> 9/0, rev 3.00/1.00, addr 0
> [   1.5657973] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 
> 9/0, rev 2.00/1.00, addr 0
> [   1.6657930] ahcisata0 port 0: device present, speed: 6.0Gb/s
> [   2.0457963] uhub2 at uhub1 port 3: vendor 1a40 (0x1a40) USB 2.0 Hub [MTT] 
> (0x0101), class 9/0, rev 2.00/1.00, addr 1
> [   2.0557947] uhub2: multiple transaction translators
> [   2.6657978] ahcisata0 port 1: PHY offline
> [   2.8157981] umass0 at uhub2 port 1 configuration 1 interface 0
> [   2.8257984] umass0: SanDisk (0x0781) Ultra (0x5581), rev 2.10/1.00, addr 2
> [   2.8257984] scsibus0 at umass0: 2 targets, 1 lun per target
> [   2.8357985] sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk 
> removable
> [   2.8457988] sd0: 58680 MB, 65535 cyl, 16 head, 63 sec, 512 bytes/sect x 
> 120176640 sectors [21/1047][   2.8658005] dk0 at sd0: "EFI system", 262144 
> blocks at 2048, type: msdos
> [   2.8757986] dk1 at sd0: "30c4cc4e-5369-449c-8994-a4b1ea665b4b", 4853760 
> blocks at 264192, type: ffs
> [   3.2258002] wd0 at atabus0 drive 0
> [   3.2258002] wd0: <BIWIN SSD>
> [   3.2258002] wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 
> 250069680 sectors
> [   3.2558002] uhidev0 at uhub2 port 2 configuration 1 interface 0
> [   3.2672735] uhidev0: SEM (0x1a2c) USB Keyboard (0x506f), rev 1.10/1.11, 
> addr 3, iclass 3/1
> [   3.2787075] ukbd0 at uhidev0
> [   3.2787075] wskbd0 at ukbd0 mux 1
> [   3.2864662] uhidev1 at uhub2 port 2 configuration 1 interface 1
> [   3.2864662] uhidev1: SEM (0x1a2c) USB Keyboard (0x506f), rev 1.10/1.11, 
> addr 3, iclass 3/0
> [   3.3012797] uhidev1: 2 report ids
> [   3.3072211] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
> [   3.3072211] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> [   3.7358030] ugen0 at uhub2 port 3
> [   3.7358030] ugen0: American Power Conversion (0x051d) Back-UPS ES 600M1 
> FW:928.a8 .D USB FW:a8 (0x0002), rev 2.00/0.90, addr 4
> [   3.7558028] swwdog0: software watchdog initialized
> [   3.8158047] boot device: sd0
> [   3.8158047] root on dk1
> [   3.8458031] root file system type: ffs
> [   3.8458031] kern.module.path=/stand/amd64/10.0/modules
> [   3.8558032] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [   3.8694711] [drm] Driver supports precise vblank timestamp query.
> [   3.8758029] i915drmkms0: interrupting at msi5 vec 0 (i915drmkms0)
> [   4.1058065] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 
> 0
> [   4.8958133] intelfb0 at i915drmkms0
> [   4.8958133] [drm] DRM_I915_DEBUG enabled
> [   4.8958133] [drm] DRM_I915_DEBUG_GEM enabled
> [   4.9058086] uvm_fault(0xffffffff8190fb40, 0xfffffffffffff000, 1) -> e
> [   4.9058086] fatal page fault in supervisor mode
> [   4.9158083] trap type 6 code 0 rip 0xffffffff80cd8e5f cs 0x8 rflags 
> 0x10202 cr2 0xfffffffffffffff0 ilevel 0 rsp 0xffffbf823a3b7b30
> [   4.9258084] curlwp 0xfffff9d601353a80 pid 0.197 lowest kstack 
> 0xffffbf823a3b32c0
> kernel: page fault trap, code=0
> Stopped in pid 0.197 (system) at netbsd:mutex_vector_enter+0x82: movq
> 0(%r12),%rax
> mutex_vector_enter() at netbsd:mutex_vector_enter+0x82
> intel_rps_mark_interactive() at netbsd:intel_rps_mark_interactive+0x1e
> intel_prepare_plane_fb() at netbsd:intel_prepare_plane_fb+0x1ab
> drm_atomic_helper_prepare_planes() at 
> netbsd:drm_atomic_helper_prepare_planes+0x
> 8f
> intel_atomic_commit() at netbsd:intel_atomic_commit+0xaf
> drm_client_modeset_commit_atomic() at 
> netbsd:drm_client_modeset_commit_atomic+0x
> 1f4
> drm_client_modeset_commit_force() at 
> netbsd:drm_client_modeset_commit_force+0x4c
>
> drm_fb_helper_restore_fbdev_mode_unlocked() at 
> netbsd:drm_fb_helper_restore_fbde
> v_mode_unlocked+0x55
> drmfb_genfb_setmode() at netbsd:drmfb_genfb_setmode+0x17
> genfb_attach() at netbsd:genfb_attach+0x176
> drmfb_attach() at netbsd:drmfb_attach+0x22d
> intelfb_attach_task() at netbsd:intelfb_attach_task+0x4e
> i915drmkms_attach_real() at netbsd:i915drmkms_attach_real+0xaa
> config_mountroot_thread() at netbsd:config_mountroot_thread+0x37
> ds          f00
> es          923c
> fs          7b00
> gs          e008
> rdi         ffffbf8010a02460
> rsi         1
> rbp         ffffbf823a3b7b90
> rbx         fffff9d601353a80
> rdx         fffff9d601353a80
> rcx         fffff9d601353a80
> rax         0
> r8          3e8
> r9          844
> r10         0
> r11         0
> r12         fffffffffffffff0
> r13         0
> r14         fffffffffffffff0
> r15         ffffbf8010a02460
> rip         ffffffff80cd8e5f    mutex_vector_enter+0x82
> cs          8
> rflags      10202
> rsp         ffffbf823a3b7b30
> ss          10
> netbsd:mutex_vector_enter+0x82: movq    0(%r12),%rax
> db{1}>