NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

NetBSD 10 headless boot



Hello -- I have a NetBSD 10 GENERIC RELEASE AMD64 installed on a Lenovo
i7-4770 desktop that I use for a build machine. I just did a fresh install
after having run 9.3 and everything was great with 10 until I tried to
boot without a monitor.

In my case, I used the VGA port (no keyboard) after noticing it didn't
boot, and sure enough it worked.

I was able to boot (in fact, just a couple hours ago) NetBSD 9.3 without a
monitor just fine.

What has changed with GENERIC NetBSD 10 that I now need a monitor connected?

The machine is located away from my monitors, etc, so I need a headless boot.

Thanks - Joel



dmesg
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022,
2023,
[     1.000000]     2024
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All
rights reserved.

[     1.000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[     1.000000]        
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[     1.000000] total memory = 16296 MB
[     1.000000] avail memory = 15742 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[     1.000004] mainbus0 (root)
[     1.000004] ACPI: RSDP 0x00000000000F0490 000024 (v02 LENOVO)
[     1.000004] ACPI: XSDT 0x00000000DAE3F088 00008C (v01 LENOVO TC-03   
00001170 AMI  00010013)
[     1.000004] ACPI: FACP 0x00000000DAE4C098 00010C (v05 LENOVO TC-03   
00001170 AMI  00010013)
[     1.000004] ACPI: DSDT 0x00000000DAE3F1A0 00CEF7 (v02 LENOVO TC-03   
00001170 INTL 20120711)
[     1.000004] ACPI: FACS 0x00000000DB887080 000040
[     1.000004] ACPI: APIC 0x00000000DAE4C1A8 000092 (v03 LENOVO TC-03   
00001170 AMI  00010013)
[     1.000004] ACPI: FPDT 0x00000000DAE4C240 000044 (v01 LENOVO TC-03   
00001170 AMI  00010013)
[     1.000004] ACPI: LPIT 0x00000000DAE4C288 00005C (v01 LENOVO TC-03   
00001170 AMI. 00000005)
[     1.000004] ACPI: MSDM 0x00000000DAE4C2E8 000055 (v03 LENOVO TC-03   
00001170 AMI  00010013)
[     1.000004] ACPI: SSDT 0x00000000DAE4C340 000539 (v01 LENOVO TC-03   
00001170 INTL 20120711)
[     1.000004] ACPI: SSDT 0x00000000DAE4C880 000AD8 (v01 LENOVO TC-03   
00001170 INTL 20120711)
[     1.000004] ACPI: MCFG 0x00000000DAE4D358 00003C (v01 LENOVO TC-03   
00001170 MSFT 00000097)
[     1.000004] ACPI: HPET 0x00000000DAE4D398 000038 (v01 LENOVO TC-03   
00001170 AMI. 00000005)
[     1.000004] ACPI: SSDT 0x00000000DAE4D3D0 00036D (v01 LENOVO TC-03   
00001170 INTL 20120711)
[     1.000004] ACPI: SSDT 0x00000000DAE4D740 0032F3 (v01 LENOVO TC-03   
00001170 INTL 20091112)
[     1.000004] ACPI: BGRT 0x00000000DAE50A38 000038 (v00 LENOVO TC-03   
00001170 AMI  00010013)
[     1.000004] ACPI: DMAR 0x00000000DAE50A70 0000B8 (v01 LENOVO TC-03   
00001170 INTL 00000001)
[     1.000004] ACPI: 5 ACPI AML tables successfully acquired and loaded
[     1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20,
24 pins
[     1.000004] cpu0 at mainbus0 apid 0
[     1.000004] cpu0: Use lfence to serialize rdtsc
[     1.000004] cpu0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu0: node 0, package 0, core 0, smt 0
[     1.000004] cpu1 at mainbus0 apid 2
[     1.000004] cpu1: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu1: node 0, package 0, core 1, smt 0
[     1.000004] cpu2 at mainbus0 apid 4
[     1.000004] cpu2: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu2: node 0, package 0, core 2, smt 0
[     1.000004] cpu3 at mainbus0 apid 6
[     1.000004] cpu3: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu3: node 0, package 0, core 3, smt 0
[     1.000004] cpu4 at mainbus0 apid 1
[     1.000004] cpu4: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu4: node 0, package 0, core 0, smt 1
[     1.000004] cpu5 at mainbus0 apid 3
[     1.000004] cpu5: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu5: node 0, package 0, core 1, smt 1
[     1.000004] cpu6 at mainbus0 apid 5
[     1.000004] cpu6: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu6: node 0, package 0, core 2, smt 1
[     1.000004] cpu7 at mainbus0 apid 7
[     1.000004] cpu7: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, id 0x306c3
[     1.000004] cpu7: node 0, package 0, core 3, smt 1
[     1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[     1.000004] acpi0: X/RSDT: OemId <LENOVO,TC-03   ,00001170>, AslId
<AMI ,00010013>
[     1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFFABAD69144C08 0003D3 (v01 PmRef  Cpu0Cst 
00003001 INTL 20120711)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFFABAA6D133808 0005AA (v01 PmRef  ApIst   
00003000 INTL 20120711)
[     1.000004] ACPI: Dynamic OEM Table Load:
[     1.000004] ACPI: SSDT 0xFFFFABAA6D010D88 000119 (v01 PmRef  ApCst   
00003000 INTL 20120711)
[     1.000004] acpi0: SCI interrupting at int 9
[     1.000004] acpi0: fixed power button present
[     1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz
quality 1000
[     1.007971] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[     1.007971] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[     1.008082] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
[     1.008082] TPMX (PNP0C01) at acpi0 not configured
[     1.008082] FWHD (INT0800) at acpi0 not configured
[     1.008082] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
irq 0
[     1.008082] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[     1.008082] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output
Device
[     1.008082] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output
Device
[     1.008082] acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output
Device
[     1.008082] acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output
Device
[     1.008082] acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output
Device
[     1.008082] acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output
Device
[     1.008082] acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output
Device
[     1.008082] acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output
Device
[     1.008082] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output
Device
[     1.008082] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output
Device
[     1.008082] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output
Device
[     1.008082] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output
Device
[     1.008082] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output
Device
[     1.008082] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output
Device
[     1.008082] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output
Device
[     1.008082] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output
Device
[     1.008082] acpivga0: connected output devices:
[     1.008082] acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
[     1.008082] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[     1.008082] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[     1.008082] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
[     1.008082] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
[     1.008082] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
[     1.008082] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
[     1.008082] acpitz0 at acpi0 (TZ00)
[     1.008082] acpitz0: active cooling level 0: 80.0C
[     1.008082] acpitz0: active cooling level 1: 55.0C
[     1.008082] acpitz0: active cooling level 2: 0.0C
[     1.008082] acpitz0: active cooling level 3: 0.0C
[     1.008082] acpitz0: active cooling level 4: 0.0C
[     1.008082] acpitz0: levels: critical 105.0 C
[     1.008082] acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5
cpu6 cpu7
[     1.008082] acpitz1: levels: critical 105.0 C, passive 108.0 C,
passive cooling
[     1.008082] ACPI: Enabled 6 GPEs in block 00 to 3F
[     1.008082] pci0 at mainbus0 bus 0: configuration mode 1
[     1.008082] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[     1.008082] pchb0 at pci0 dev 0 function 0: Intel Haswell Host Bridge,
DRAM (rev. 0x06)
[     1.008082] ppb0 at pci0 dev 1 function 0: Intel Haswell PCI-E x16
Controller (rev. 0x06)
[     1.008082] ppb0: PCI Express capability version 2 <Root Port of PCI-E
Root Complex> x16 @ 5.0GT/s
[     1.008082] pci1 at ppb0 bus 1
[     1.008082] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.008082] puc0 at pci1 dev 0 function 0: Nanjing QinHeng Electronics
CH382 (com, com)
[     1.008082] com2 at puc0 port 0 (16850-compatible): ioaddr 0xe0c0,
interrupting at ioapic0 pin 16
[     1.008082] com2: ns16550a, 16-byte FIFO
[     1.008082] com3 at puc0 port 1 (16850-compatible): ioaddr 0xe0c8,
interrupting at ioapic0 pin 16
[     1.008082] com3: ns16550a, 16-byte FIFO
[     1.008082] i915drmkms0 at pci0 dev 2 function 0: Intel Haswell
Integrated Graphics Device (rev. 0x06)
[     1.008082] hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
[     1.008082] hdaudio0: interrupting at msi0 vec 0
[     1.008082] hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
[     1.008082] hdafg0 at hdaudio0: Intel HDMI/DP
[     1.008082] hdafg0: DP00 8ch: Digital Out [Jack]
[     1.008082] hdafg0: 8ch/0ch 48000Hz PCM16*
[     1.008082] audio0 at hdafg0: playback
[     1.008082] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[     1.008082] spkr0 at audio0: PC Speaker (synthesized)
[     1.008082] wsbell at spkr0 not configured
[     1.008082] xhci0 at pci0 dev 20 function 0: Intel 8 Series USB xHCI
(rev. 0x04)
[     1.008082] xhci0: 64-bit DMA
[     1.008082] xhci0: interrupting at msi1 vec 0
[     1.008082] xhci0: xHCI version 1.0
[     1.008082] usb0 at xhci0: USB revision 3.0
[     1.008082] usb1 at xhci0: USB revision 2.0
[     1.008082] Intel 8 Series MEI Controller (miscellaneous
communications, revision 0x04) at pci0 dev 22 function 0 not configured
[     1.008082] ehci0 at pci0 dev 26 function 0: Intel 8 Series USB EHCI
(rev. 0x04)
[     1.008082] ehci0: 64-bit DMA
[     1.008082] ehci0: interrupting at ioapic0 pin 16
[     1.008082] ehci0: BIOS has given up ownership
[     1.008082] ehci0: EHCI version 1.0
[     1.008082] ehci0: Using DMA subregion for control data structures
[     1.008082] usb2 at ehci0: USB revision 2.0
[     1.008082] hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
[     1.008082] hdaudio1: interrupting at msi2 vec 0
[     1.008082] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[     1.008082] hdafg1 at hdaudio1: Realtek ALC662
[     1.008082] hdafg1: DAC00 2ch: Speaker [Jack], HP Out [Jack]
[     1.008082] hdafg1: ADC01 2ch: Line In [Jack], Mic In [Jack]
[     1.008082] hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz
192000Hz PCM16 PCM20 PCM24 AC3
[     1.008082] audio1 at hdafg1: playback, capture, full duplex, independent
[     1.008082] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[     1.008082] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[     1.008082] spkr1 at audio1: PC Speaker (synthesized)
[     1.008082] wsbell at spkr1 not configured
[     1.008082] ppb1 at pci0 dev 28 function 0: Intel 8 Series PCIe (rev.
0xd4)
[     1.008082] ppb1: PCI Express capability version 2 <Root Port of PCI-E
Root Complex> x1 @ 5.0GT/s
[     1.008082] pci2 at ppb1 bus 2
[     1.008082] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.008082] ppb2 at pci0 dev 28 function 1: Intel 8 Series PCIe (rev.
0xd4)
[     1.008082] ppb2: PCI Express capability version 2 <Root Port of PCI-E
Root Complex> x1 @ 5.0GT/s
[     1.008082] pci3 at ppb2 bus 3
[     1.008082] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.008082] xhci1 at pci3 dev 0 function 0: Renesas Technologies
uPD720202 USB 3.0 Host Controller (rev. 0x02)
[     1.008082] xhci1: 64-bit DMA
[     1.008082] xhci1: interrupting at msix3 vec 0
[     1.008082] xhci1: xHCI version 1.0
[     1.008082] usb3 at xhci1: USB revision 3.0
[     1.008082] usb4 at xhci1: USB revision 2.0
[     1.008082] ppb3 at pci0 dev 28 function 2: Intel 8 Series PCIe (rev.
0xd4)
[     1.008082] ppb3: PCI Express capability version 2 <Root Port of PCI-E
Root Complex> x1 @ 5.0GT/s
[     1.008082] ppb3: link is x1 @ 2.5GT/s
[     1.008082] pci4 at ppb3 bus 4
[     1.008082] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.008082] re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x0c)
[     1.008082] re0: interrupting at msix4 vec 0
[     1.008082] re0: RTL8168G/8111G (0x4c00)
[     1.008082] re0: Ethernet address 74:27:ea:e9:44:bc
[     1.008082] re0: using 256 tx descriptors
[     1.008082] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface,
rev. 0
[     1.008082] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, auto
[     1.008082] ehci1 at pci0 dev 29 function 0: Intel 8 Series USB EHCI
(rev. 0x04)
[     1.008082] ehci1: 64-bit DMA
[     1.008082] ehci1: interrupting at ioapic0 pin 23
[     1.008082] ehci1: BIOS has given up ownership
[     1.008082] ehci1: EHCI version 1.0
[     1.008082] ehci1: Using DMA subregion for control data structures
[     1.008082] usb5 at ehci1: USB revision 2.0
[     1.008082] ichlpcib0 at pci0 dev 31 function 0: Intel H81 LPC (rev.
0x04)
[     1.008082] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz
quality 1000
[     1.008082] ichlpcib0: 24-bit timer
[     1.008082] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[     1.008082] tco0: Min/Max interval 1/367 seconds
[     1.008082] ahcisata0 at pci0 dev 31 function 2: Intel 8 Series
(desktop) SATA Controller (AHCI) (rev. 0x04)
[     1.008082] ahcisata0: 64-bit DMA
[     1.008082] ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP
0xc730ff43<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
[     1.008082] ahcisata0: interrupting at msi5 vec 0
[     1.008082] atabus0 at ahcisata0 channel 0
[     1.008082] atabus1 at ahcisata0 channel 4
[     1.008082] atabus2 at ahcisata0 channel 5
[     1.008082] ichsmb0 at pci0 dev 31 function 3: Intel 8 Series SMBus
Controller (rev. 0x04)
[     1.008082] ichsmb0: interrupting at ioapic0 pin 18
[     1.008082] iic0 at ichsmb0: I2C bus
[     1.008082] isa0 at ichlpcib0
[     1.008082] pckbc0 at isa0 port 0x60-0x64
[     1.008082] pcppi0 at isa0 port 0x61
[     1.008082] spkr2 at pcppi0: PC Speaker
[     1.008082] wsbell at spkr2 not configured
[     1.008082] midi0 at pcppi0: PC speaker
[     1.008082] sysbeep0 at pcppi0
[     1.008082] attimer1: attached to pcppi0
[     1.008082] acpicpu0 at cpu0: ACPI CPU
[     1.008082] acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
[     1.008082] acpicpu0: C2: FFH, lat 148 us, pow   200 mW
[     1.008082] acpicpu0: P0: FFH, lat  10 us, pow 84000 mW, 3401 MHz,
turbo boost
[     1.008082] acpicpu0: P1: FFH, lat  10 us, pow 84000 mW, 3400 MHz
[     1.008082] acpicpu0: P2: FFH, lat  10 us, pow 77169 mW, 3200 MHz
[     1.008082] acpicpu0: P3: FFH, lat  10 us, pow 70587 mW, 3000 MHz
[     1.008082] acpicpu0: P4: FFH, lat  10 us, pow 64262 mW, 2800 MHz
[     1.008082] acpicpu0: P5: FFH, lat  10 us, pow 61182 mW, 2700 MHz
[     1.008082] acpicpu0: P6: FFH, lat  10 us, pow 55201 mW, 2500 MHz
[     1.008082] acpicpu0: P7: FFH, lat  10 us, pow 49464 mW, 2300 MHz
[     1.008082] acpicpu0: P8: FFH, lat  10 us, pow 43946 mW, 2100 MHz
[     1.008082] acpicpu0: P9: FFH, lat  10 us, pow 38654 mW, 1900 MHz
[     1.008082] acpicpu0: P10: FFH, lat  10 us, pow 34277 mW, 1700 MHz
[     1.008082] acpicpu0: P11: FFH, lat  10 us, pow 29407 mW, 1500 MHz
[     1.008082] acpicpu0: P12: FFH, lat  10 us, pow 27053 mW, 1400 MHz
[     1.008082] acpicpu0: P13: FFH, lat  10 us, pow 22509 mW, 1200 MHz
[     1.008082] acpicpu0: P14: FFH, lat  10 us, pow 18167 mW, 1000 MHz
[     1.008082] acpicpu0: P15: FFH, lat  10 us, pow 14031 mW,  800 MHz
[     1.008082] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[     1.008082] acpicpu1 at cpu1: ACPI CPU
[     1.008082] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[     1.008082] acpicpu2 at cpu2: ACPI CPU
[     1.008082] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
[     1.008082] acpicpu3 at cpu3: ACPI CPU
[     1.008082] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
[     1.008082] acpicpu4 at cpu4: ACPI CPU
[     1.008082] acpicpu5 at cpu5: ACPI CPU
[     1.008082] acpicpu6 at cpu6: ACPI CPU
[     1.008082] acpicpu7 at cpu7: ACPI CPU
[     1.008082] timecounter: Timecounter "clockinterrupt" frequency 100 Hz
quality 0
[     1.008082] timecounter: Timecounter "TSC" frequency 3392149000 Hz
quality 3000
[     1.015120] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 3.00/1.00, addr 0
[     1.015120] uhub0: 2 ports with 2 removable, self powered
[     1.015120] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 0
[     1.015120] uhub1: 10 ports with 10 removable, self powered
[     1.015120] uhub2 at usb3: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 3.00/1.00, addr 0
[     1.015120] uhub2: 2 ports with 2 removable, self powered
[     1.015120] uhub3 at usb4: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 0
[     1.015120] uhub3: 2 ports with 2 removable, self powered
[     1.017023] IPsec: Initialized Security Association Processing.
[     1.027024] uhub4 at usb2: NetBSD (0x0000) EHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 1
[     1.027024] uhub4: 2 ports with 2 removable, self powered
[     1.027024] uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 1
[     1.027024] uhub5: 2 ports with 2 removable, self powered
[     1.107023] ahcisata0 port 0: device present, speed: 3.0Gb/s
[     1.107023] ahcisata0 port 5: device present, speed: 1.5Gb/s
[     2.097022] uhub6 at uhub4 port 1: vendor 8087 (0x8087) product 8008
(0x8008), class 9/0, rev 2.00/0.04, addr 2
[     2.097022] uhub6: single transaction translator
[     2.097022] uhub7 at uhub5 port 1: vendor 8087 (0x8087) product 8000
(0x8000), class 9/0, rev 2.00/0.04, addr 2
[     2.097022] uhub7: single transaction translator
[     2.097022] uhub6: 4 ports with 4 removable, self powered
[     2.097022] uhub7: 6 ports with 6 removable, self powered
[     2.637022] wd0 at atabus0 drive 0
[     2.637022] wd0: <WDC WD15EARS-22MVWB0>
[     2.637022] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     2.637022] wd0: 1397 GB, 2907021 cyl, 16 head, 63 sec, 512 bytes/sect
x 2930277168 sectors (4096 bytes/physsect; first aligned sector: 8)
[     2.707021] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode
6 (Ultra/133), NCQ (32 tags) w/PRIO
[     2.707021] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
[     2.707021] atapibus0 at atabus2: 1 targets
[     2.727021] cd0 at atapibus0 drive 0: <MATSHITA DVD-RAM SW830,
8SSO10A11855, 8.82> cdrom removable
[     2.737022] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode
5 (Ultra/100)
[     2.737022] cd0(ahcisata0:5:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 5 (Ultra/100) (using DMA)
[     2.847021] uhidev0 at uhub6 port 2 configuration 1 interface 0
[     2.847021] uhidev0: vendor 1c4f (0x1c4f) USB Keyboard (0x008b), rev
1.10/1.00, addr 3, iclass 3/1
[     2.847021] ukbd0 at uhidev0
[     2.847021] wskbd0 at ukbd0: console keyboard
[     2.847021] uhidev1 at uhub6 port 2 configuration 1 interface 1
[     2.847021] uhidev1: vendor 1c4f (0x1c4f) USB Keyboard (0x008b), rev
1.10/1.00, addr 3, iclass 3/0
[     2.857022] uhidev1: 2 report ids
[     2.857022] uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
[     2.857022] uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
[     3.367021] ugen0 at uhub6 port 4
[     3.367021] ugen0: Generic (0x0bda) USB2.0-CRW (0x0129), rev
2.00/39.60, addr 4
[     3.367021] swwdog0: software watchdog initialized
[     3.367021] boot device: wd0
[     3.367021] root on wd0a dumps on wd0b
[     3.397021] root file system type: ffs
[     3.407021] kern.module.path=/stand/amd64/10.0/modules
[     3.409208] [drm] PipeC fused off
[     3.409208] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[     3.409208] [drm] Driver supports precise vblank timestamp query.
[     3.409208] i915drmkms0: interrupting at msi6 vec 0 (i915drmkms0)
[     3.417023] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on
minor 0
[     3.447019] intelfb0 at i915drmkms0
[     3.447019] [drm] DRM_I915_DEBUG enabled
[     3.447019] [drm] DRM_I915_DEBUG_GEM enabled
[     3.447019] intelfb0: framebuffer at 0xe0009000, size 1920x1080, depth
32, stride 7680
[     4.097019] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100
emulation), using wskbd0
[     4.167018] wsmux1: connecting to wsdisplay0
[    12.327013] wsdisplay0: screen 1 added (default, vt100 emulation)
[    12.327013] wsdisplay0: screen 2 added (default, vt100 emulation)
[    12.337011] wsdisplay0: screen 3 added (default, vt100 emulation)
[    12.337011] wsdisplay0: screen 4 added (default, vt100 emulation)



Home | Main Index | Thread Index | Old Index