NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Trouble with re driver



On Sat, 18 Nov 2023 20:14:32 +0100
BERTRAND Joël <joel.bertrand%systella.fr@localhost> wrote:

> 	Maybe something is broken in recent changes in
> src/sys/dev/pci/pci_resource.c, pcidevs_data.h or pcidevs.h.

Since the attach function runs it does not seems to be a pcidevs problem.
pci_resource.c is only used on ARM platforms. You can find the equivalent
x86 code in pci_map.c. It has not been changed recently from what I can tell.

> pci_mem_find: expected mem type 00000004, found 00000000

This error means we expected a 64-bit mem range assigned to the card
by the ACPI firmware but found a 32-bit range. It is a strange error
to get in this context because the card according to the config space
dump clearly only has a 32-bit BAR so it has to use 32-bit bus space.
We can reach that situation if the re driver incorrectly tried to map
the BAR with PCI_MAPREG_MEM_TYPE_64BIT.

I suspect the regression originates with an acpica update and some
firmware bug might be a prerequisite to trigger it.

You'll need to figure out why the expected mem type check fires.
A good place to start digging is to dissect this code and find
out what the value retured by pci_mapreg_type is:
https://github.com/NetBSD/src/blob/d7465f61f231e4328d26a5628c5ccb266f168f3a/sys/dev/pci/if_re_pci.c#L210

Since you mentioned you have lots of other network adapters it might
also be that the system has ran out of 32-bit bus space and
is attempting to use 64-bit as a last resort.


Home | Main Index | Thread Index | Old Index