NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
is there a NOACPI GENERIC kernel for NetBSD-9.2_STABLE?
I installed NetBSD-9.2_STABLE amd64 on an HP Pavilion Notebook,
15-au123cl.
Previously I reported (NetBSD-9.1) that /sbin/shutdown was not
working. Rebooting (-r switch) resulted in a hang at the line
"uhid2 at uhidev0 report id 7: input=0, output=0 feature=256".
This is still what happens with NetBSD-9.2.
Trying to power off with `/sbin/shutdown -p` previously resulted
in a hang with the last four lines:
acpitz0: workqueue busy: updates stopped
core1temp0: workqueue busy: updates stopped
core2temp: workqueue busy: updates stopped
acpibat0: workqueue busy: updates stopped
Strangely and unexpectedly, however, the system started to
hang much earlier in the shutdown process at the line:
"acpi0: entering state S5". I can't imagine what I could have
done to change its behavior, but the system consistently hangs
now at that point.
I remember many years ago there was a kernel on the install disk
that had acpi turned off. There doesn't appear to be one now,
but I think it would be worth trying one if a no-acpi kernel
for NetBSD-9.2 is available somewhere.
I've been trying to solve this problem for months now without success,
so if anyone has other ideas on how to get over this hurdle, I am
all ears.
dmesg for GENERIC is appended below.
Henry
1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All
rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 9.2 (GENERIC) #0: Wed May 12 13:15:55 UTC 2021
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 12173 MB
[ 1.000000] avail memory = 11793 MB
[ 1.000000] cpu_rng: RDSEED
[ 1.000000] rnd: seeded with 256 bits
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000003] efi: systbl at pa 8a29d018
[ 1.000003] HP HP Pavilion Notebook
(Type1ProductConfigId)
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x000000008AEFD014 000024 (v02 HPQOEM)
[ 1.000003] ACPI: XSDT 0x000000008AEBB188 00011C (v01 HPQOEM
SLIC-MPC 00000000 HP 01000013)
[ 1.000003] ACPI: FACP 0x000000008AEE2000 00010C (v05 HPQOEM
SLIC-MPC 00000000 HP 00040000)
[ 1.000003] ACPI: DSDT 0x000000008AEBF000 01FEAD (v02 HPQOEM 8215
00000000 ACPI 00040000)
[ 1.000003] ACPI: FACS 0x000000008AE5C000 000040
[ 1.000003] ACPI: UEFI 0x000000008AEFC000 000236 (v01 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: UEFI 0x000000008AEFB000 000042 (v01 HPQOEM 8215
00000002 HP 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEF3000 0072D9 (v01 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: MSDM 0x000000008AEF2000 000055 (v03 HPQOEM
SLIC-MPC 00000001 HP 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEF1000 0004C8 (v02 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEF0000 000046 (v02 HPQOEM 8215
00003000 ACPI 00040000)
[ 1.000003] ACPI: TPM2 0x000000008AEEF000 000034 (v03 HPQOEM 8215
00000000 HP 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEEB000 00313E (v02 HPQOEM 8215
00003000 ACPI 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEE7000 0032B8 (v02 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: ASF! 0x000000008AEE6000 0000A5 (v32 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: ASPT 0x000000008AEE5000 000034 (v07 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: BOOT 0x000000008AEE4000 000028 (v01 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: DBGP 0x000000008AEE3000 000034 (v01 HPQOEM
SLIC-MPC 00000001 HP 00040000)
[ 1.000003] ACPI: HPET 0x000000008AEE1000 000038 (v01 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: APIC 0x000000008AEE0000 0000BC (v03 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: MCFG 0x000000008AEDF000 00003C (v01 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEBE000 0001BC (v02 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: LPIT 0x000000008AEBD000 000094 (v01 HPQOEM 8215
00000000 HP 00040000)
[ 1.000003] ACPI: WSMT 0x000000008AEBC000 000028 (v01 HPQOEM 8215
00000000 HP 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEBA000 00029F (v02 HPQOEM 8215
00000000 ACPI 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEB9000 000346 (v01 HPQOEM 8215
00000000 ACPI 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEB5000 003002 (v02 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEB4000 00051E (v02 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: DBGP 0x000000008AEB3000 000034 (v01 HPQOEM
SLIC-MPC 00000002 HP 00040000)
[ 1.000003] ACPI: DBG2 0x000000008AEB2000 000054 (v00 HPQOEM 8215
00000002 HP 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEB0000 00106A (v02 HPQOEM 8215
00001000 ACPI 00040000)
[ 1.000003] ACPI: SSDT 0x000000008AEAF000 000EDE (v02 HPQOEM 8215
00003000 ACPI 00040000)
[ 1.000003] ACPI: DMAR 0x000000008AEAE000 0000A8 (v01 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: FPDT 0x000000008AEAD000 000044 (v01 HPQOEM
SLIC-MPC 00000002 HP 00040000)
[ 1.000003] ACPI: BGRT 0x000000008AEAC000 000038 (v01 HPQOEM 8215
00000001 HP 00040000)
[ 1.000003] ACPI: 13 ACPI AML tables successfully acquired and
loaded
[ 1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version
0x20, 120 pins
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: CPU base freq 2700000000 Hz
[ 1.000003] cpu0: CPU max freq 3100000000 Hz
[ 1.000003] cpu0: TSC freq CPUID 2712000000 Hz
[ 1.000003] cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id
0x806e9
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 2
[ 1.000003] cpu1: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id
0x806e9
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] cpu2 at mainbus0 apid 1
[ 1.000003] cpu2: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id
0x806e9
[ 1.000003] cpu2: package 0, core 0, smt 1
[ 1.000003] cpu3 at mainbus0 apid 3
[ 1.000003] cpu3: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, id
0x806e9
[ 1.000003] cpu3: package 0, core 1, smt 1
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000000>, AslId
<HP ,01000013>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFC117518BA808 0003FF (v02 PmRef
Cpu0Cst 00003001 INTL 20160527)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFC114FC87E008 0006B4 (v02 PmRef
Cpu0Ist 00003000 INTL 20160527)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFC114FC87E808 00065C (v02 PmRef ApIst
00003000 INTL 20160527)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFC117518DBAC8 00018A (v02 PmRef ApCst
00003000 INTL 20160527)
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545
Hz quality 1000
[ 1.010366] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.010366] timecounter: Timecounter "hpet0" frequency 24000000 Hz
quality 2000
[ 1.010953] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
[ 1.010953] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.010953] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display
Output Device
[ 1.010953] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display
Output Device
[ 1.010953] acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display
Output Device
[ 1.010953] acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display
Output Device
[ 1.010953] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display
Output Device
[ 1.010953] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display
Output Device
[ 1.010953] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display
Output Device
[ 1.010953] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display
Output Device
[ 1.010953] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display
Output Device
[ 1.010953] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display
Output Device
[ 1.010953] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display
Output Device
[ 1.010953] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display
Output Device
[ 1.010953] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display
Output Device
[ 1.010953] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display
Output Device
[ 1.010953] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display
Output Device
[ 1.010953] acpiout15 at acpivga0 (DD1F, 0x0410): ACPI Display
Output Device
[ 1.010953] acpiout15: brightness levels: [0-100]
[ 1.010953] acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display
Output Device
[ 1.010953] acpivga0: connected output devices:
[ 1.010953] acpivga0: 0x0400: Unknown Output Device, head 0
[ 1.010953] ACEL (HPQ6007) at acpi0 not configured
[ 1.010953] WLBT (HPQ6001) at acpi0 not configured
[ 1.010953] IOTR (PNP0C02) at acpi0 not configured
[ 1.010953] FWHD (INT0800) at acpi0 not configured
[ 1.010953] LDRC (PNP0C02) at acpi0 not configured
[ 1.010953] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.010953] pckbc1 at acpi0 (PS2K, HPQ8001) (kbd port): io
0x60,0x64 irq 1
[ 1.010953] pckbc2 at acpi0 (PS2M, SYN3229) (aux port): irq 12
[ 1.010953] PDRC (PNP0C02) at acpi0 not configured
[ 1.010953] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[ 1.010953] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
[ 1.010953] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.010953] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.010953] PEPD (INT33A1) at acpi0 not configured
[ 1.010953] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI
Interface
[ 1.010953] wmihp0 at acpiwmi0: HP WMI mappings
[ 1.010953] TPM (MSFT0101) at acpi0 not configured
[ 1.010953] IETM (INT3400) at acpi0 not configured
[ 1.010953] PTID (INT340E) at acpi0 not configured
[ 1.010953] acpitz0 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
[ 1.010953] acpitz0: levels: passive 99.0 C, passive cooling
[ 1.010953] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 1.010953] pckbd0 at pckbc1 (kbd slot)
[ 1.010953] pckbc1: using irq 1 for kbd slot
[ 1.010953] wskbd0 at pckbd0: console keyboard
[ 1.010953] pms0 at pckbc1 (aux slot)
[ 1.010953] pms0: Synaptics touchpad version 8.1
[ 1.010953] pms0: Extended W mode, Palm detect, One button click
pad, Multi-finger Report, Multi-finger
[ 1.010953] pckbc1: using irq 12 for aux slot
[ 1.010953] wsmouse0 at pms0 mux 0
[ 1.010953] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.010953] pci0: i/o space, memory space enabled, rd/line,
rd/mult, wr/inv ok
[ 1.010953] pchb0 at pci0 dev 0 function 0: vendor 8086 product
5904 (rev. 0x02)
[ 1.010953] i915drmkms0 at pci0 dev 2 function 0: vendor 8086
product 5916 (rev. 0x02)
[ 1.010953] vendor 8086 product 1903 (miscellaneous DASP, revision
0x02) at pci0 dev 4 function 0 not configured
[ 1.010953] xhci0 at pci0 dev 20 function 0: vendor 8086 product
9d2f (rev. 0x21)
[ 1.010953] xhci0: interrupting at msi0 vec 0
[ 1.010953] xhci0: xHCI version 1.0
[ 1.010953] usb0 at xhci0: USB revision 3.0
[ 1.010953] usb1 at xhci0: USB revision 2.0
[ 1.010953] vendor 8086 product 9d31 (miscellaneous DASP, revision
0x21) at pci0 dev 20 function 2 not configured
[ 1.010953] vendor 8086 product 9d3a (miscellaneous
communications, revision 0x21) at pci0 dev 22 function 0 not
configured
[ 1.010953] ahcisata0 at pci0 dev 23 function 0: vendor 8086
product 9d03 (rev. 0x21)
[ 1.010953] ahcisata0: 64-bit DMA
[ 1.010953] ahcisata0: AHCI revision 1.31, 3 ports, 32 slots, CAP
0xc734ff02<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
[ 1.010953] ahcisata0: interrupting at msi1 vec 0
[ 1.010953] atabus0 at ahcisata0 channel 0
[ 1.010953] atabus1 at ahcisata0 channel 1
[ 1.010953] atabus2 at ahcisata0 channel 2
[ 1.010953] ppb0 at pci0 dev 28 function 0: vendor 8086 product
9d10 (rev. 0xf1)
[ 1.010953] ppb0: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x4 @ 8.0GT/s
[ 1.010953] pci1 at ppb0 bus 1
[ 1.010953] pci1: i/o space, memory space enabled, rd/line, wr/inv
ok
[ 1.010953] ppb1 at pci0 dev 28 function 4: vendor 8086 product
9d14 (rev. 0xf1)
[ 1.010953] ppb1: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.010953] ppb1: link is x1 @ 2.5GT/s
[ 1.010953] pci2 at ppb1 bus 2
[ 1.010953] pci2: i/o space, memory space enabled, rd/line, wr/inv
ok
[ 1.010953] rtsx0 at pci2 dev 0 function 0: vendor 10ec product
522a (rev. 0x01)
[ 1.010953] rtsx0: interrupting at msi2 vec 0
[ 1.010953] sdmmc0 at rtsx0
[ 1.010953] ppb2 at pci0 dev 28 function 5: vendor 8086 product
9d15 (rev. 0xf1)
[ 1.010953] ppb2: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.010953] ppb2: link is x1 @ 2.5GT/s
[ 1.010953] pci3 at ppb2 bus 3
[ 1.010953] pci3: i/o space, memory space enabled, rd/line, wr/inv
ok
[ 1.010953] re0 at pci3 dev 0 function 0: RealTek
8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x0a)
[ 1.010953] re0: interrupting at msix3 vec 0
[ 1.010953] re0: Ethernet address c8:d3:ff:eb:03:51
[ 1.010953] re0: using 256 tx descriptors
[ 1.010953] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media
interface, rev. 0
[ 1.010953] rgephy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT-FDX, auto
[ 1.010953] ppb3 at pci0 dev 29 function 0: vendor 8086 product
9d18 (rev. 0xf1)
[ 1.010953] ppb3: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x2 @ 8.0GT/s
[ 1.010953] pci4 at ppb3 bus 4
[ 1.010953] pci4: i/o space, memory space enabled, rd/line, wr/inv
ok
[ 1.010953] ppb4 at pci0 dev 29 function 3: vendor 8086 product
9d1b (rev. 0xf1)
[ 1.010953] ppb4: PCI Express capability version 2 <Root Port of
PCI-E Root Complex> x1 @ 8.0GT/s
[ 1.010953] ppb4: link is x1 @ 2.5GT/s
[ 1.010953] pci5 at ppb4 bus 5
[ 1.010953] pci5: i/o space, memory space enabled, rd/line, wr/inv
ok
[ 1.010953] iwm0 at pci5 dev 0 function 0: vendor 8086 product
24fb (rev. 0x10)
[ 1.010953] iwm0: interrupting at msi4 vec 0
[ 1.010953] pcib0 at pci0 dev 31 function 0: vendor 8086 product
9d58 (rev. 0x21)
[ 1.010953] vendor 8086 product 9d21 (miscellaneous memory,
revision 0x21) at pci0 dev 31 function 2 not configured
[ 1.010953] hdaudio0 at pci0 dev 31 function 3: HD Audio
Controller
[ 1.010953] hdaudio0: interrupting at msi5 vec 0
[ 1.010953] hdafg0 at hdaudio0: vendor 10ec product 0295
[ 1.010953] hdafg0: DAC00 2ch: Speaker [Built-In]
[ 1.010953] hdafg0: DAC01 2ch: HP Out [Jack]
[ 1.010953] hdafg0: ADC02 2ch: Mic In [Jack]
[ 1.010953] hdafg0: ADC03 2ch: Mic In [Built-In]
[ 1.010953] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16
PCM20 PCM24
[ 1.010953] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1.010953] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes
(10ms) for playback
[ 1.010953] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes
(10ms) for recording
[ 1.010953] spkr0 at audio0: PC Speaker (synthesized)
[ 1.010953] wsbell at spkr0 not configured
[ 1.010953] hdafg1 at hdaudio0: vendor 8086 product 280b
[ 1.010953] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.010953] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.010953] ichsmb0 at pci0 dev 31 function 4: vendor 8086 product
9d23 (rev. 0x21)
[ 1.010953] ichsmb0: interrupting at ioapic0 pin 16
[ 1.010953] iic0 at ichsmb0: I2C bus
[ 1.010953] isa0 at pcib0
[ 1.010953] pcppi0 at isa0 port 0x61
[ 1.010953] spkr1 at pcppi0: PC Speaker
[ 1.010953] wsbell at spkr1 not configured
[ 1.010953] midi0 at pcppi0: PC speaker
[ 1.010953] sysbeep0 at pcppi0
[ 1.010953] attimer1: attached to pcppi0
[ 1.010953] acpicpu0 at cpu0: ACPI CPU
[ 1.010953] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.010953] acpicpu0: C2: FFH, lat 151 us, pow 200 mW
[ 1.010953] acpicpu0: C3: FFH, lat 1034 us, pow 200 mW
[ 1.010953] acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 2601 MHz,
turbo boost
[ 1.010953] acpicpu0: P1: FFH, lat 10 us, pow 14236 mW, 2600 MHz
[ 1.010953] acpicpu0: P2: FFH, lat 10 us, pow 13487 mW, 2500 MHz
[ 1.010953] acpicpu0: P3: FFH, lat 10 us, pow 12752 mW, 2400 MHz
[ 1.010953] acpicpu0: P4: FFH, lat 10 us, pow 11467 mW, 2200 MHz
[ 1.010953] acpicpu0: P5: FFH, lat 10 us, pow 10234 mW, 2000 MHz
[ 1.010953] acpicpu0: P6: FFH, lat 10 us, pow 9566 mW, 1900 MHz
[ 1.010953] acpicpu0: P7: FFH, lat 10 us, pow 8271 mW, 1700 MHz
[ 1.010953] acpicpu0: P8: FFH, lat 10 us, pow 7163 mW, 1500 MHz
[ 1.010953] acpicpu0: P9: FFH, lat 10 us, pow 6561 mW, 1400 MHz
[ 1.010953] acpicpu0: P10: FFH, lat 10 us, pow 5522 mW, 1200 MHz
[ 1.010953] acpicpu0: P11: FFH, lat 10 us, pow 4957 mW, 1100 MHz
[ 1.010953] acpicpu0: P12: FFH, lat 10 us, pow 3461 mW, 800 MHz
[ 1.010953] acpicpu0: P13: FFH, lat 10 us, pow 2945 mW, 700 MHz
[ 1.010953] acpicpu0: P14: FFH, lat 10 us, pow 2559 mW, 600 MHz
[ 1.010953] acpicpu0: P15: FFH, lat 10 us, pow 1586 mW, 400 MHz
[ 1.010953] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.010953] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.010953] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.010953] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.010953] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.010953] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.010953] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.010953] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.010953] coretemp0 at cpu0: thermal sensor, 1 C resolution,
Tjmax=100
[ 1.010953] acpicpu1 at cpu1: ACPI CPU
[ 1.010953] coretemp1 at cpu1: thermal sensor, 1 C resolution,
Tjmax=100
[ 1.010953] acpicpu2 at cpu2: ACPI CPU
[ 1.010953] acpicpu3 at cpu3: ACPI CPU
[ 1.010953] timecounter: Timecounter "clockinterrupt" frequency
100 Hz quality 0
[ 1.010953] cpu1: CPU base freq 2700000000 Hz
[ 1.010953] cpu1: CPU max freq 3100000000 Hz
[ 1.010953] cpu1: TSC freq CPUID 2712000000 Hz
[ 1.010953] cpu2: CPU base freq 2700000000 Hz
[ 1.010953] cpu2: CPU max freq 3100000000 Hz
[ 1.010953] cpu2: TSC freq CPUID 2712000000 Hz
[ 1.010953] cpu3: CPU base freq 2700000000 Hz
[ 1.010953] cpu3: CPU max freq 3100000000 Hz
[ 1.010953] cpu3: TSC freq CPUID 2712000000 Hz
[ 1.010953] timecounter: Timecounter "TSC" frequency 2712000000 Hz
quality 3000
[ 1.246912] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000),
class 9/0, rev 3.00/1.00, addr 0
[ 1.246912] uhub0: 6 ports with 6 removable, self powered
[ 1.246912] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000),
class 9/0, rev 2.00/1.00, addr 0
[ 1.281703] uhub1: 12 ports with 12 removable, self powered
[ 1.281703] acpiacad0: AC adapter online.
[ 1.321704] IPsec: Initialized Security Association Processing.
[ 1.331703] acpibat0: Hewlett-Packard LION rechargeable battery
[ 1.331703] acpibat0: granularity: low->warn 0.010 Ah, warn->full
0.025 Ah
[ 1.341703] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.341703] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 2.341706] ahcisata0 port 2: PHY offline
[ 2.891706] wd0 at atabus0 drive 0
[ 2.921707] wd0: <Samsung SSD 860 EVO 250GB>
[ 2.941707] wd0: drive supports 1-sector PIO transfers, LBA48
addressing
[ 2.941707] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512
bytes/sect x 488397168 sectors
[ 2.971709] wd0: GPT GUID: 1603d2a0-b19b-4abb-80b5-69a0c7afc00a
[ 2.971709] dk0 at wd0: "dba3f01a-cb62-4d96-82b3-493d710bb3fe",
262144 blocks at 2048, type: msdos
[ 3.001707] dk1 at wd0: "922703af-094f-438e-b051-731e146571b9",
463202605 blocks at 264192, type: ffs
[ 3.031707] dk2 at wd0: "90f7996c-d733-483d-b6bb-7d4a189fe627",
24928591 blocks at 463468544, type: swap
[ 3.061703] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 3.061703] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.061703] atapibus0 at atabus1: 1 targets
[ 3.101703] cd0 at atapibus0 drive 0: <hp DVDRW GUE1N,
KXRGC750742, UE00> cdrom removable
[ 3.131703] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133)
[ 3.131703] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 3.131703] uvideo0 at uhub1 port 3 configuration 1 interface 0:
DFKAR019I505IX (0x1bcf) HP Wide Vision HD (0x2c87), rev 2.00/0.04,
addr 1
[ 3.142093] video0 at uvideo0: DFKAR019I505IX (0x1bcf) HP Wide
Vision HD (0x2c87), rev 2.00/0.04, addr 1
[ 4.051706] ubt0 at uhub1 port 7
[ 4.051706] ubt0: vendor 8087 (0x8087) product 0aa7 (0xaa7), rev
2.00/0.01, addr 2
[ 4.961706] uhidev0 at uhub1 port 8 configuration 1 interface 0
[ 4.961706] uhidev0: eGalax Inc. (0xeef) eGalaxTouch
EXC3000-0367-44.01.00 (0xc04d), rev 2.01/67.02, addr 3, iclass 3/1
[ 4.961706] uhidev0: 7 report ids
[ 4.961706] uhid0 at uhidev0 reportid 3: input=63, output=63,
feature=0
[ 4.961706] uhid1 at uhidev0 reportid 5: input=0, output=0,
feature=2
[ 4.961706] uts0 at uhidev0 reportid 6
[ 4.961706] uts0: autoconfiguration error: touchscreen has no
range report
[ 4.961706] uhid2 at uhidev0 reportid 7: input=0, output=0,
feature=256
[ 4.971708] WARNING: 1 error while detecting hardware; check
system log.
[ 4.971708] boot device: wd0
[ 4.971708] root on dk1 dumps on dk2
[ 4.971708] root file system type: ffs
[ 4.971708] kern.module.path=/stand/amd64/9.2/modules
[ 4.971708] kern info: [drm] Memory usable by graphics device =
4096M
[ 4.971708] kern info: [drm] Supports vblank timestamp caching Rev
2 (21.10.2013).
[ 4.971708] kern info: [drm] Driver supports precise vblank
timestamp query.
[ 4.982128] kern info: [drm] failed to find VBIOS tables
[ 4.982128] i915drmkms0: interrupting at ioapic0 pin 16
(i915drmkms0)
[ 4.989891] kern error:
[drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_drv.c:636)i915
_firmware_load_error_print] *ERROR* failed to load firmware
i915/kbl_dmc_ver1.bin (0)
[ 5.041703] kern error:
[drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_drv.c:651)i915
_firmware_load_error_print] *ERROR* kern error:
[drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_guc_loader.c:
560)guc_fw_fetch] *ERROR* Failed to fetch GuC firmware from
i915/kbl_guc_ver9_14.bin (error -2)
[ 5.131703] The driver is built-in, so to load the firmware you
need to
[ 5.161703] include it either in the kernel (see
CONFIG_EXTRA_FIRMWARE) or
[ 5.191703] in your initrd/initramfs image.
[ 5.221703] kern error:
[drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_gem.c:5417)i91
5_gem_init_hw] *ERROR* Failed to initialize GuC, error -5 (ignored)
[ 5.281703] intelfb0 at i915drmkms0
[ 5.301703] intelfb0: framebuffer at 0xffff9e00f6b34000, size
1366x768, depth 32, stride 5504
[ 5.311706] iwm0: hw rev 0x220, fw ver 22.361476.0, address
30:e3:7a:c8:e8:a3
[ 5.311706] iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
[ 5.311706] iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 5.311706] iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 6.281706] kern info: [drm] RC6 on
[ 6.651703] wsdisplay0 at intelfb0 kbdmux 1: console (default,
vt100 emulation), using wskbd0
[ 6.691703] wsmux1: connecting to wsdisplay0
[ 17.291703] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 17.301703] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 17.301703] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 17.301703] wsdisplay0: screen 4 added (default, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index