Re: Phoronix 8-way-BSD-install - NetBSD bombed

["Andrei M." <lingvofactory%gmail.com@localhost>]

As I previousy wrote, I switched from SATA to IDE mode in BIOS (after
which everything started working), so the system no longer recognizes
ahcisata. Here's the output for my HD and CD:

wd0 at atabus0 drive 0
wd0: <ST9500325AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ890AS, UH44  215630,
1.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)

2016-09-11 12:33 GMT+03:00 Michael van Elst <mlelstv%serpens.de@localhost>:
> lingvofactory%gmail.com@localhost ("Andrei M.") writes:
>
>>No, this happened when the installation CD was loading. I've had
>>exactly the same problem in the installation process last year, see
>>attachment.
>
> The screenshot shows
>
> two SATA devices that couldn't be recognized.
> one USB umass device.
>
> The information about the CD has either scrolled off, or it's
> one of the SATA devices, probably the latter (with only 1.5Gb/s on
> the second port).
>
> Can you identify your ahcisata controller? E.g.:
>
> ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x8c02 (rev. 0x04)
> ahcisata0: interrupting at ioapic0 pin 19
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
>
> --
> --
>                                 Michael van Elst
> Internet: mlelstv%serpens.de@localhost
>                                 "A potential Snark may lurk in every tree."