Console Resolution

[Clark Chapman <cchapman8%cogeco.ca@localhost>]

I did a fresh install of NBSD 7.0 on my x86_64 machine. When it boots 
the console starts in 80x25 mode then when DRM initializes it increases 
the resolution so the text is so small that my 77 year old eyes can 
barely read it. I have the same problem on my Raspberry Pi. When I start 
an X11 terminal everything is fine. I have read all the documentation I 
can think of without finding anything that helps.

I am out of ideas and would appreciate some help.

Here is the dmesg file.


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 1023 MB
avail memory = 975 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0xfb6a0 000014 (v00 ACPIAM)
ACPI: RSDT 0x3ff90000 00003C (v01 A_M_I_ OEMRSDT  08001027 MSFT 00000097)
ACPI: FACP 0x3ff90200 000084 (v02 A_M_I_ OEMFACP  08001027 MSFT 00000097)
ACPI: DSDT 0x3ff905c0 007BFA (v01  A0968 A0968000 00000000 INTL 20060113)
ACPI: FACS 0x3ff9e000 000040
ACPI: APIC 0x3ff90390 00006C (v01 A_M_I_ OEMAPIC  08001027 MSFT 00000097)
ACPI: MCFG 0x3ff90400 00003C (v01 A_M_I_ OEMMCFG  08001027 MSFT 00000097)
ACPI: OEMB 0x3ff9e040 000080 (v01 A_M_I_ AMI_OEM  08001027 MSFT 00000097)
ACPI: HPET 0x3ff981c0 000038 (v01 A_M_I_ OEMHPET  08001027 MSFT 00000097)
ACPI: GSCI 0x3ff9e0c0 002024 (v01 A_M_I_ GMCHSCI  08001027 MSFT 00000097)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz, id 0x6fd
cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz, id 0x6fd
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <A_M_I_,OEMRSDT ,08001027>, AslId <MSFT,00000097>
ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0xF0, should be 0xE3 (20131218/tbprint-237)
ACPI: SSDT 0x3ffa00f0 000214 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 0x0 000214 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 0x3ffa0310 000143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
ACPI: SSDT 0x0 000143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0401) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
UAR1 (PNP0501) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29c0 (rev. 0x02)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 0x1002 product 0x68f9 (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: VIA VT1708B 8ch
hdafg1: DAC00 8ch: Speaker [Jack], HP Out [Jack]
hdafg1: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: 8ch/2ch 48000Hz PCM16*
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ale0 at pci3 dev 0 function 0: Attansic/Atheros L1E Ethernet
ale0: AR8121 (L1E), ioapic0 pin 17
ale0: Ethernet address 00:1f:c6:37:e3:32
atphy0 at ale0 phy 0: L1 10/100/1000 PHY, rev. 9
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 88000 mW, 2200 MHz
acpicpu0: P1: FFH, lat  10 us, pow 67496 mW, 1600 MHz
acpicpu0: P2: FFH, lat  10 us, pow 54472 mW, 1200 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus2 drive 0
wd0: <HDS728080PLA380 40Y9028LEN>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76324 MB, 155072 cyl, 16 head, 63 sec, 512 bytes/sect x 156312576 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: CHICONY USB NetVista Full Width Keyboard, rev 1.10/1.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: vendor 0x04b3 product 0x310b, rev 2.00/1.60, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW  DVR-217D, IDDP031494WL, 1.07> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
drm: initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x0471).
drm: register mmio base: 0xfeac0000
drm: register mmio size: 131072
drm kern info: ATOM BIOS: 68F9.12.20.0.62.AS12
radeon0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon0: info: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
drm: Detected VRAM RAM=400M, BAR=256M
drm: RAM width 64bits DDR
Zone  kernel: Available graphics memory: 339166 kiB
drm: radeon: 1024M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading CEDAR Microcode
drm: Internal thermal controller without fan control
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffff800013e2cc00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffff800013e2cc0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffff800013a2a418
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm:   HDMI-A-1
drm:   HPD1
drm:   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
drm:   Encoders:
drm:     DFP1: INTERNAL_UNIPHY1
drm: Connector 1:
drm:   DVI-I-1
drm:   HPD4
drm:   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
drm:   Encoders:
drm:     DFP2: INTERNAL_UNIPHY
drm:     CRT2: INTERNAL_KLDSCP_DAC2
drm: Connector 2:
drm:   VGA-1
drm:   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
drm:   Encoders:
drm:     CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff80001404e000, size 1680x1050, depth 32, stride 6912
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
wsdisplay0: screen 5 added (default, vt100 emulation)
wsdisplay0: screen 6 added (default, vt100 emulation)
wsdisplay0: screen 7 added (default, vt100 emulation)