Re: Occasional panic on 5.1.4_PATCH

[Masanobu SAITOH <msaitoh%execsw.org@localhost>]

On 2014/08/28 15:27, Masanobu SAITOH wrote:
> On 2014/08/26 1:40, Peter Eisch wrote:
> > fatal page fault in supervisor mode
> > trap type 6 code 2 eip c0167da7 cs 8 eflags 10246 cr2 0 ilevel 4
>
> eip is the program counter. The trap was occured when executing
> an instruction at c0167da7. Do "objdump /netbsd" and check

objdump -D /netbsd


> around c0167da7. You will know which function was executed.
>
> > panic: trap
> > Begin traceback...
> > fatal page fault in supervisor mode
> > trap type 6 code 0 eip c05b0841 cs 8 eflags 10246 cr2 4 ilevel 4
> > panic: trap
> > Faulted in mid-traceback; aborting...rebooting...
> >
> > Hi,
> >
> >
> > I managed to get the above off serial console as it restarted.  Could
> > someone please point me to how I might be able to figure out what event(s)
> > are happening to cause this panic?  Given the age of the hardware, this
> > could be a factor but it only happens a day or so after modifying
> > /etc/ipf.conf or /etc/ipnat.conf.  Otherwise it runs for without issue.
> >
> > Hardware: Dell 1850, installed in 2009, running mostly GENERIC i386 kernel.
> >
> > I have other systems running this same hardware w/5.1.2 kernel just fine.
> >
> > (Yes, if I could update it to 6.x I would, but it's more likely to be
> > replace with an ASA-5525X.)
> >
> > Thanks,
> >
> > peter


--
-----------------------------------------------
                SAITOH Masanobu (msaitoh%execsw.org@localhost
                                 msaitoh%netbsd.org@localhost)