Re: Help - Reboot with PM2ControlBlock has zero

To: "netbsd-users " <netbsd-users%netbsd.org@localhost>
Subject: Re: Help - Reboot with PM2ControlBlock has zero
From: "Maurizio Caloro" <mauric%gmx.ch@localhost>
Date: Sun, 17 Feb 2013 11:14:07 +0100
please don't write all together ;-)
for any help i'am happy

> Hello Together
> Today my machine was restart alone and over the Network wasn't reachable!
> it's possible for this exist any help or any possible patch?
> regards
> Mauri
> 
> ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
> 0x0000000000000050/0x0 (20110623/tbfadt-586)
> ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8
> (20110623/tbfadt-638)
> 
> Machine
> HP Compaq dc7900 USDT, Core 2 Duo E8400
> 
> hp7900# uname -rsa
> NetBSD hp7900.dzcmts001-cpe-001.datazug.ch 6.0.1 NetBSD 6.0.1 (GENERIC)
> amd64
> 
> hp7900# pcictl pci0 list
> 000:00:0: Intel 82Q45 Host Bridge (host bridge, revision 0x03)
> 000:02:0: Intel 82Q45 Integrated Graphics Device (VGA display, revision
> 0x03)
> 000:02:1: Intel 82Q45 Integrated Graphics Device (miscellaneous display,
> revision 0x03)
> 000:03:0: Intel product 0x2e14 (miscellaneous communications, revision
> 0x03)
> 000:03:2: Intel product 0x2e16 (IDE mass storage, interface 0x85, revision
> 0x03)
> 000:03:3: Intel product 0x2e17 (serial communications, interface 0x02,
> revision 0x03)
> 000:25:0: Intel i82567LM-3 LAN Controller (ethernet network, revision
> 0x02)
> 000:26:0: Intel 82801JD USB UHCI Controller (USB serial bus, revision
> 0x02)
> 000:26:1: Intel 82801JD USB UHCI Controller (USB serial bus, revision
> 0x02)
> 000:26:2: Intel 82801JD USB UHCI Controller (USB serial bus, revision
> 0x02)
> 000:26:7: Intel 82801JD USB EHCI Controller (USB serial bus, interface
> 0x20, revision 0x02)
> 000:27:0: Intel 82801JD High Definition Audio Controller (multimedia,
> subclass 0x03, revision 0x02)
> 000:28:0: Intel 82801JD PCI Express Port (PCI bridge, revision 0x02)
> 000:28:4: Intel 82801JD PCI Express Port (PCI bridge, revision 0x02)
> 000:29:0: Intel 82801JD USB UHCI Controller (USB serial bus, revision
> 0x02)
> 000:29:1: Intel 82801JD USB UHCI Controller (USB serial bus, revision
> 0x02)
> 000:29:2: Intel 82801JD USB UHCI Controller (USB serial bus, revision
> 0x02)
> 000:29:7: Intel 82801JD USB EHCI Controller (USB serial bus, interface
> 0x20, revision 0x02)
> 000:30:0: Intel 82801BA Hub-PCI Bridge (PCI bridge, interface 0x01,
> revision 0xa2)
> 000:31:0: Intel 82801JDO LPC Interface Bridge (ISA bridge, revision 0x02)
> 000:31:2: Intel 82801JD SATA Controller (AHCI mode) (SATA mass storage,
> interface 0x01, revision 0x02)
> 
> hp7900# drvctl -l -t
> mainbus0
>   cpu0
>     acpicpu0
>     coretemp0
>   cpu1
>     acpicpu1
>     coretemp1
>   ioapic0
>   acpi0
>     hpet0
>     attimer1
>     pcppi1
>       midi0
>       sysbeep0
>     pckbc1
>     pckbc2
>     acpivga0
>     acpibut0
>     acpiwmi0
>       wmihp0
>   pci0
>     pchb0
>       agp0
>     vga0
>       wsdisplay0
>       i915drm0
>     pciide0
>       atabus0
>       atabus1
>     wm0
>       ukphy0
>     uhci0
>       usb0
>         uhub0
>     uhci1
>       usb1
>         uhub1
>     uhci2
>       usb2
>         uhub2
>     ehci0
>       usb3
>         uhub3
>     hdaudio0
>       hdafg0
>         audio0
>     ppb0
>       pci1
>     ppb1
>       pci2
>     uhci3
>       usb4
>         uhub4
>     uhci4
>       usb5
>         uhub5
>     uhci5
>       usb6
>         uhub6
>     ehci1
>       usb7
>         uhub7
>     ppb2
>       pci3
>     ichlpcib0
>       isa0
>         tpm0
>         fdc0
>     ahcisata0
>       atabus2
>         wd0
>       atabus3
>         atapibus0
>           cd0
> pad0
>   audio1
> 
> hp7900# dmesg
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 6.0.1 (GENERIC)
> total memory = 3991 MB
> avail memory = 3860 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> Hewlett-Packard HP Compaq dc7900 Ultra-Slim Desktop ( )
> mainbus0 (root)
> ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
> 0x0000000000000050/0x0 (20110623/tbfadt-586)
> ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8
> (20110623/tbfadt-638)
> cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz,
> id 0x1067a
> cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz,
> id 0x1067a
> ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20110623
> acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20110712>, AslId <    ,00000000>
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
> pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
> FDC0 (PNP0700) at acpi0 not configured
> APIC (PNP0003) at acpi0 not configured
> TPM (IFX0102) at acpi0 not configured
> SBD1 (PNP0C02) at acpi0 not configured
> SBD3 (PNP0C02) at acpi0 not configured
> SBD2 (PNP0C02) at acpi0 not configured
> acpivga0 at acpi0 (GFX0): ACPI Display Adapter
> MBRD (PNP0C01) at acpi0 not configured
> acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
> acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
> wmihp0 at acpiwmi0: HP WMI mappings
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2e10 (rev. 0x03)
> agp0 at pchb0: detected 32764k stolen memory
> agp0: aperture at 0xe0000000, size 0x10000000
> vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2e12 (rev. 0x03)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> i915drm0 at vga0: Intel Q45/Q43
> i915drm0: AGP at 0xe0000000 256MB
> i915drm0: Initialized i915 1.6.0 20080730
> vendor 0x8086 product 0x2e13 (miscellaneous display, revision 0x03) at
> pci0 dev 2 function 1 not configured
> vendor 0x8086 product 0x2e14 (miscellaneous communications, revision 0x03)
> at pci0 dev 3 function 0 not configured
> pciide0 at pci0 dev 3 function 2: vendor 0x8086 product 0x2e16 (rev. 0x03)
> pciide0: bus-master DMA support present, but unused (no driver support)
> pciide0: primary channel wired to native-PCI mode
> pciide0: using ioapic0 pin 18 for native-PCI interrupt
> atabus0 at pciide0 channel 0
> pciide0: secondary channel wired to native-PCI mode
> atabus1 at pciide0 channel 1
> vendor 0x8086 product 0x2e17 (serial communications, interface 0x02,
> revision 0x03) at pci0 dev 3 function 3 not configured
> wm0 at pci0 dev 25 function 0: 82567LM-3 LAN Controller (rev. 0x02)
> wm0: interrupting at ioapic0 pin 19
> wm0: PCI-Express bus
> wm0: FLASH
> wm0: Ethernet address 00:24:81:04:3e:0c
> ukphy0 at wm0 phy 2: OUI 0x000ac2, model 0x000b, rev. 1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3a67 (rev. 0x02)
> uhci0: interrupting at ioapic0 pin 20
> usb0 at uhci0: USB revision 1.0
> uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x3a68 (rev. 0x02)
> uhci1: interrupting at ioapic0 pin 21
> 
> usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x3a69 (rev. 0x02)
> uhci2: interrupting at ioapic0 pin 22
> usb2 at uhci2: USB revision 1.0
> ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x3a6c (rev. 0x02)
> ehci0: interrupting at ioapic0 pin 22
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
> usb3 at ehci0: USB revision 2.0
> hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
> hdaudio0: interrupting at ioapic0 pin 21
> hdafg0 at hdaudio0: ADI AD1884A
> hdafg0: DAC00 2ch: Speaker [Jack]
> hdafg0: ADC01 2ch: Line In [Jack]
> hdafg0: DAC02 2ch: HP Out [Jack]
> hdafg0: ADC03 2ch: Mic In [Jack]
> hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz
> 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg0: full duplex, playback, capture, independent
> ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a70 (rev. 0x02)
> ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci1 at ppb0 bus 32
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a78 (rev. 0x02)
> ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci2 at ppb1 bus 48
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a64 (rev. 0x02)
> uhci3: interrupting at ioapic0 pin 20
> usb4 at uhci3: USB revision 1.0
> uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a65 (rev. 0x02)
> uhci4: interrupting at ioapic0 pin 21
> usb5 at uhci4: USB revision 1.0
> uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a66 (rev. 0x02)
> uhci5: interrupting at ioapic0 pin 22
> usb6 at uhci5: USB revision 1.0
> ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a6a (rev. 0x02)
> ehci1: interrupting at ioapic0 pin 20
> ehci1: EHCI version 1.0
> ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
> usb7 at ehci1: USB revision 2.0
> ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa2)
> pci3 at ppb2 bus 7
> pci3: i/o space, memory space enabled
> ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a14 (rev.
> 0x02)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> ichlpcib0: TCO (watchdog) timer configured.
> ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3a02 (rev.
> 0x02)
> ahcisata0: interrupting at ioapic0 pin 18
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP
> 0xe720ff25<SXS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
> atabus2 at ahcisata0 channel 0
> atabus3 at ahcisata0 channel 1
> isa0 at ichlpcib0
> tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev
> 0x10
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
> acpicpu0: C2: FFH, lat  17 us, pow   500 mW
> acpicpu0: P0: FFH, lat  10 us, pow 135000 mW, 3000 MHz
> acpicpu0: P1: FFH, lat  10 us, pow 67123 mW, 1998 MHz
> acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
> acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
> acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
> acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
> acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
> acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
> acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
> acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
> coretemp0 at cpu0: thermal sensor, 1 C resolution
> acpicpu1 at cpu1: ACPI CPU
> coretemp1 at cpu1: thermal sensor, 1 C resolution
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
> 1
> uhub3: 6 ports with 6 removable, self powered
> uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub4: 2 ports with 2 removable, self powered
> uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub5: 2 ports with 2 removable, self powered
> uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub6: 2 ports with 2 removable, self powered
> uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
> 1
> uhub7: 6 ports with 6 removable, self powered
> ahcisata0 port 0: device present, speed: 3.0Gb/s
> ahcisata0 port 1: device present, speed: 1.5Gb/s
> wd0 at atabus2 drive 0
> wd0: <Hitachi HTS723216L9A360>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808
> sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> (Ultra/100) (using DMA)
> atapibus0 at atabus3: 1 targets
> cd0 at atapibus0 drive 0: <Slimtype DVD A  DS8A2L, 901070265835, 3H37>
> cdrom removable
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> (Ultra/100) (using DMA)
> Kernelized RAIDframe activated
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex, playback, capture
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
Prev by Date: Re: question about paritions/disklabel
Next by Date: Dirvish backup script don't run correct with CronJob ?
Previous by Thread: Help - Reboot with PM2ControlBlock has zero
Next by Thread: question about paritions/disklabel
Indexes:
Home | Main Index | Thread Index | Old Index