Re: SCSI problems

[Manuel Bouyer <bouyer%antioche.eu.org@localhost>]

On Mon, Jun 20, 2011 at 05:24:00PM +0000, Dieter BSD wrote:
> Alpha 164lx
> NetBSD 3.0.1
> QLogic SCSI controllers (wide, diff)
> 
> Once upon a a time this machine was running fine with these controllers
> and disks.  The disks were moved to a UDB/Multia box and worked fine there.
> UDB/Multia box died, I moved the disks back to the 164lx.  I would like to
> (1) get the data off the disks, (2) install NetBSD 5 on one of them to see
> if an unrelated problem has been fixed.  But...
> 
> isp0 at pci2 dev 4 function 0: QLogic 1020 Fast Wide SCSI HBA
> isp0: interrupting at eb164 irq 3
> scsibus0 at isp0: 16 targets, 8 luns per target
> 
> sd1: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
> sd2: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
> 
> isp0: Auto Request Sense failed for 0.1.0
> isp0: BOTCHED cmd for 0.1.0 cmd 0x25 datalen 8
> sd1(isp0:0:1:0): generic HBA error
> sd1: sync (132.00ns offset 8), 16-bit (15.150MB/s) transfers, tagged queueing
> isp0: Auto Request Sense failed for 0.1.0
> isp0: BOTCHED cmd for 0.1.0 cmd 0x23 datalen 12
> sd1(isp0:0:1:0): generic HBA error
> 
> 132.00ns ?  15.150MB/s ?
> Smells like data corruption?  Maybe the controller card went bad?
> 
> I tried 2 other controller cards with identical results.

Maube it's the drive then, or some cabling/termination issue ?

-- 
Manuel Bouyer <bouyer%antioche.eu.org@localhost>
     NetBSD: 26 ans d'experience feront toujours la difference
--