NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: NetBSD 5 upgrade : where is my network interface ?


Le 5 déc. 09 à 18:00, Patrick Welche a écrit :

On Fri, Dec 04, 2009 at 07:40:34PM +0100, Florence HENRY wrote:
I cannot upgrade my old NetBSD-current from 2007 (NetBSD 4.99.16) to

I booted netbsd-GENERIC kernel from 5.0.1, but it fails to configure the network interface. A quick look at dmesg suggests this could be an ACPi
related problem. Booting with ACPI disabled does not work around the
issue. NetBSD-current from yesterday exhibit the same brain damage.

I don't actually see any errors in there - could you try a GENERIC kernel
but uncommenting

#options        PCI_ADDR_FIXUP          # fixup PCI I/O addresses
#options        PCI_BUS_FIXUP           # fixup PCI bus numbering
#options        PCI_INTR_FIXUP          # fixup PCI interrupt routing

It does not work either. here is the dmesg :

NetBSD 5.0_STABLE (PCIFIXUP) #0: Sun Dec  6 21:19:21 UTC 2009
manu@bob:/home6/tmp/netbsd-5-20091206/usr/src/sys/arch/i386/compile/ obj/PCIFIXUP
total memory = 3326 MB
avail memory = 3257 MB
NEC SA2500R-1 (01)
mainbus0 (root)
pci_addr_fixup: 000:01:1 0x10de 0x0052 new address 0x00005800
ACPI Error (tbxfroot-0308): A valid RSDP was not found [20080321]
ACPI: unable to initialize ACPI tables: AE_NOT_FOUND
mainbus0: Intel MP Specification (Version 1.4) (nVIDIA   CK804-2P    )
cpu0 at mainbus0 apid 0: AMD 686-class, 1808MHz, id 0x20f12
cpu0: WARNING: errata present, BIOS upgrade may be
cpu0: WARNING: necessary to ensure reliable operation
cpu1 at mainbus0 apid 1: AMD 686-class, 1808MHz, id 0x20f12
ioapic0 at mainbus0 apid 2
ioapic1 at mainbus0 apid 3
ioapic2 at mainbus0 apid 4
pci0 at mainbus0 bus 0: configuration mode 1
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x0051 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa3)
ehci0: interrupting at ioapic0 pin 7
ehci0: BIOS refuses to give up ownership, using force
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: using ioapic0 pin 11 for native-PCI interrupt
atabus2 at viaide1 channel 0
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: using ioapic0 pin 10 for native-PCI interrupt
atabus4 at viaide2 channel 0
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci1 at ppb0 bus 1
vga1 at pci1 dev 7 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ppb1 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci2 at ppb1 bus 2
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
lpt1 at isa0 port 0x278-0x27b irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
uhub0 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
viaide1 port 0: device present, speed: 3.0Gb/s
viaide1 port 1: device present, speed: 3.0Gb/s
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <CD-224E-N, , 1.AA> cdrom removable
wd0 at atabus2 drive 0: <HDT722525DLA380>
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1 at atabus3 drive 0: <ST31000528AS>
wd1: quirks 2<FORCE_LBA48>
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

I also tried to boot with the -c flag, and typing "disable acpi", but it does not change anything.

Florence HENRY
LESIA - Observatoire de Paris

Home | Main Index | Thread Index | Old Index