Re: USB device detection problem

[Brad du Plessis <bradd%cat.co.za@localhost>]

Brad du Plessis wrote:
> I'll try and compile with USB_DEBUG and repeat the procedure.

Here are the logs from a USB_DEBUG compile, I take it this:

usbd_new_device: set address 2 failed - trying a port reset

is the problem ?

Thanks,
Brad

Sep  1 05:45:23 test /netbsd: Copyright (c) 1996, 1997, 1998, 1999, 
2000, 2001, 2002, 2003, 2004, 2005,
Sep  1 05:45:23 test /netbsd: 2006, 2007
Sep  1 05:45:23 test /netbsd: The NetBSD Foundation, Inc.  All rights 
reserved.
Sep  1 05:45:23 test /netbsd: Copyright (c) 1982, 1986, 1989, 1991, 1993
Sep  1 05:45:23 test /netbsd: The Regents of the University of 
California.  All rights reserved.
Sep  1 05:45:23 test /netbsd:
Sep  1 05:45:23 test /netbsd: NetBSD 4.0_STABLE (GENERIC.MP) #0: Mon 
Sep  1 05:27:52 SAST 2008
Sep  1 05:45:23 test /netbsd: 
root@test:/usr/data/wd0f/src/sys/arch/i386/compile/GENERIC.MP
Sep  1 05:45:23 test /netbsd: total memory = 996 MB
Sep  1 05:45:23 test /netbsd: rbus: rbus_min_start set to 0x40000000
Sep  1 05:45:23 test /netbsd: avail memory = 968 MB
Sep  1 05:45:23 test /netbsd: timecounter: Timecounters tick every 
10.000 msec
Sep  1 05:45:23 test /netbsd: timecounter: Timecounter "i8254" frequency 
1193182 Hz quality 100
Sep  1 05:45:23 test /netbsd: mainbus0 (root)
Sep  1 05:45:23 test /netbsd: cpu0 at mainbus0: apid 0 (boot processor)
Sep  1 05:45:23 test /netbsd: cpu0: Intel Core 2 (Merom) (686-class), 
1800.13 MHz, id 0x6f2
Sep  1 05:45:23 test /netbsd: cpu0: features 
bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
Sep  1 05:45:23 test /netbsd: cpu0: features 
bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
Sep  1 05:45:23 test /netbsd: cpu0: features 
bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
Sep  1 05:45:23 test /netbsd: cpu0: features2 
e39d<SSE3,MONITOR,DS-CPL,EST,TM2,xTPR>
Sep  1 05:45:23 test /netbsd: cpu0: "Genuine Intel(R) CPU            
2160  @ 1.80GHz"
Sep  1 05:45:23 test /netbsd: cpu0: I-cache 32 KB 64B/line 8-way, 
D-cache 32 KB 64B/line 8-way
Sep  1 05:45:23 test /netbsd: cpu0: using thermal monitor 1
Sep  1 05:45:23 test /netbsd: cpu0: Enhanced SpeedStep (1340 mV) 1800 MHz
Sep  1 05:45:23 test /netbsd: cpu0: unknown Enhanced SpeedStep CPU.
Sep  1 05:45:23 test /netbsd: cpu0: calibrating local timer
Sep  1 05:45:23 test /netbsd: cpu0: apic clock running at 200 MHz
Sep  1 05:45:23 test /netbsd: cpu1 at mainbus0: apid 1 (application 
processor)
Sep  1 05:45:23 test /netbsd: cpu1: starting
Sep  1 05:45:23 test /netbsd: cpu1: Intel Core 2 (Merom) (686-class), 
1800.07 MHz, id 0x6f2
Sep  1 05:45:23 test /netbsd: cpu1: features 
bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
Sep  1 05:45:23 test /netbsd: cpu1: features 
bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
Sep  1 05:45:23 test /netbsd: cpu1: features 
bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
Sep  1 05:45:23 test /netbsd: cpu1: features2 
e39d<SSE3,MONITOR,DS-CPL,EST,TM2,xTPR>
Sep  1 05:45:23 test /netbsd: cpu1: "Genuine Intel(R) CPU            
2160  @ 1.80GHz"
Sep  1 05:45:23 test /netbsd: cpu1: I-cache 32 KB 64B/line 8-way, 
D-cache 32 KB 64B/line 8-way
Sep  1 05:45:23 test /netbsd: cpu1: using thermal monitor 1
Sep  1 05:45:23 test /netbsd: ioapic0 at mainbus0 apid 2 (I/O APIC)
Sep  1 05:45:23 test /netbsd: ioapic0: pa 0xfec00000, version 20, 24 pins
Sep  1 05:45:23 test /netbsd: ioapic0: misconfigured as apic 0
Sep  1 05:45:23 test /netbsd: ioapic0: remapped to apic 2
Sep  1 05:45:23 test /netbsd: acpi0 at mainbus0: Advanced Configuration 
and Power Interface
Sep  1 05:45:23 test /netbsd: acpi0: using Intel ACPI CA subsystem 
version 20060217
Sep  1 05:45:23 test /netbsd: acpi0: X/RSDT: OemId <INTEL ,DG33FB  
,00000131>, AslId <    ,01000013>
Sep  1 05:45:23 test /netbsd: acpi0: SCI interrupting at int 9
Sep  1 05:45:23 test /netbsd: acpi0: fixed-feature power button present
Sep  1 05:45:23 test /netbsd: timecounter: Timecounter "ACPI-Fast" 
frequency 3579545 Hz quality 1000
Sep  1 05:45:23 test /netbsd: ACPI-Fast 24-bit timer
Sep  1 05:45:23 test /netbsd: mpacpi: could not get bus number, assuming 
bus 0
Sep  1 05:45:23 test /netbsd: ACPI Object Type 'Processor' (0x0c) at 
acpi0 not configured
Sep  1 05:45:23 test last message repeated 3 times
Sep  1 05:45:23 test /netbsd: acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
Sep  1 05:45:23 test /netbsd: PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 
not configured
Sep  1 05:45:23 test /netbsd: PNP0C02 [Plug and Play motherboard 
register resources] at acpi0 not configured
Sep  1 05:45:23 test /netbsd: PNP0C0F [PCI interrupt link device] at 
acpi0 not configured
Sep  1 05:45:23 test last message repeated 7 times
Sep  1 05:45:23 test /netbsd: PNP0200 [AT DMA Controller] at acpi0 not 
configured
Sep  1 05:45:23 test /netbsd: PNP0B00 [AT Real-Time Clock] at acpi0 not 
configured
Sep  1 05:45:23 test /netbsd: PNP0000 [AT Interrupt Controller] at acpi0 
not configured
Sep  1 05:45:23 test /netbsd: npx1 at acpi0 (PNP0C04)
Sep  1 05:45:23 test /netbsd: npx1: io 0xf0 irq 13
Sep  1 05:45:23 test /netbsd: npx1: reported by CPUID; using exception 16
Sep  1 05:45:23 test /netbsd: attimer1 at acpi0 (PNP0100): AT Timer
Sep  1 05:45:23 test /netbsd: attimer1: io 0x40-0x43,0x50-0x53 irq 0
Sep  1 05:45:23 test /netbsd: pcppi1 at acpi0 (PNP0800)
Sep  1 05:45:23 test /netbsd: pcppi1: io 0x61
Sep  1 05:45:23 test /netbsd: pcppi1: children must have an explicit unit
Sep  1 05:45:23 test /netbsd: midi0 at pcppi1: PC speaker (CPU-intensive 
output)
Sep  1 05:45:23 test /netbsd: sysbeep0 at pcppi1
Sep  1 05:45:23 test /netbsd: PNP0C02 [Plug and Play motherboard 
register resources] at acpi0 not configured
Sep  1 05:45:23 test /netbsd: pckbc1 at acpi0 (PNP0303): kbd port
Sep  1 05:45:23 test /netbsd: pckbc1: io 0x60,0x64 irq 1
Sep  1 05:45:23 test /netbsd: PNP0501 [16550A-compatible COM port] at 
acpi0 not configured
Sep  1 05:45:23 test /netbsd: PNP0003 [APIC] at acpi0 not configured
Sep  1 05:45:23 test /netbsd: pcppi1: attached to attimer1
Sep  1 05:45:23 test /netbsd: pckbd0 at pckbc1 (kbd slot)
Sep  1 05:45:23 test /netbsd: pckbc1: using irq 1 for kbd slot
Sep  1 05:45:23 test /netbsd: wskbd0 at pckbd0: console keyboard
Sep  1 05:45:23 test /netbsd: pci0 at mainbus0 bus 0: configuration mode 1
Sep  1 05:45:23 test /netbsd: pci0: i/o space, memory space enabled, 
rd/line, rd/mult, wr/inv ok
Sep  1 05:45:23 test /netbsd: pchb0 at pci0 dev 0 function 0
Sep  1 05:45:23 test /netbsd: pchb0: Intel product 0x29c0 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: vga1 at pci0 dev 2 function 0: Intel 
product 0x29c2 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: wsdisplay0 at vga1 kbdmux 1: console 
(80x25, vt100 emulation), using wskbd0
Sep  1 05:45:23 test /netbsd: wsmux1: connecting to wsdisplay0
Sep  1 05:45:23 test /netbsd: Intel product 0x29c4 (miscellaneous 
communications, revision 0x02) at pci0 dev 3 function 0 not configured
Sep  1 05:45:23 test /netbsd: wm0 at pci0 dev 25 function 0: 82801I (C) 
LAN Controller, rev. 2
Sep  1 05:45:23 test /netbsd: wm0: interrupting at ioapic0 pin 20 (irq 9)
Sep  1 05:45:23 test /netbsd: wm0: PCI-Express bus
Sep  1 05:45:23 test /netbsd: wm0: FLASH
Sep  1 05:45:23 test /netbsd: wm0: Ethernet address 00:19:d1:f6:cb:0c
Sep  1 05:45:23 test /netbsd: igphy0 at wm0 phy 1: i82566 10/100/1000 
media interface, rev. 0
Sep  1 05:45:23 test /netbsd: igphy0: 10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Sep  1 05:45:23 test /netbsd: uhci0 at pci0 dev 26 function 0: Intel 
product 0x2937 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: uhci0: interrupting at ioapic0 pin 18 (irq 10)
Sep  1 05:45:23 test /netbsd: usb0 at uhci0: USB revision 1.0
Sep  1 05:45:23 test /netbsd: uhub0 at usb0
Sep  1 05:45:23 test /netbsd: uhub0: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub0: 2 ports with 2 removable, self powered
Sep  1 05:45:23 test /netbsd: uhci1 at pci0 dev 26 function 1: Intel 
product 0x2938 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: uhci1: interrupting at ioapic0 pin 21 (irq 11)
Sep  1 05:45:23 test /netbsd: usb1 at uhci1: USB revision 1.0
Sep  1 05:45:23 test /netbsd: uhub1 at usb1
Sep  1 05:45:23 test /netbsd: uhub1: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub1: 2 ports with 2 removable, self powered
Sep  1 05:45:23 test /netbsd: uhci2 at pci0 dev 26 function 2: Intel 
product 0x2939 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: uhci2: interrupting at ioapic0 pin 17 (irq 9)
Sep  1 05:45:23 test /netbsd: usb2 at uhci2: USB revision 1.0
Sep  1 05:45:23 test /netbsd: uhub2 at usb2
Sep  1 05:45:23 test /netbsd: uhub2: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub2: 2 ports with 2 removable, self powered
Sep  1 05:45:23 test /netbsd: ehci0 at pci0 dev 26 function 7: Intel 
product 0x293c (rev. 0x02)
Sep  1 05:45:23 test /netbsd: ehci0: interrupting at ioapic0 pin 17 (irq 9)
Sep  1 05:45:23 test /netbsd: ehci0: BIOS has given up ownership
Sep  1 05:45:23 test /netbsd: ehci0: EHCI version 1.0
Sep  1 05:45:23 test /netbsd: ehci0: companion controllers, 2 ports 
each: uhci0 uhci1 uhci2
Sep  1 05:45:23 test /netbsd: usb3 at ehci0: USB revision 2.0
Sep  1 05:45:23 test /netbsd: uhub3 at usb3
Sep  1 05:45:23 test /netbsd: uhub3: Intel EHCI root hub, class 9/0, rev 
2.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub3: 6 ports with 6 removable, self powered
Sep  1 05:45:23 test /netbsd: azalia0 at pci0 dev 27 function 0: Generic 
High Definition Audio Controller
Sep  1 05:45:23 test /netbsd: azalia0: interrupting at ioapic0 pin 22 
(irq 10)
Sep  1 05:45:23 test /netbsd: azalia0: host: 0x8086/0x293e (rev. 2)
Sep  1 05:45:23 test /netbsd: azalia0: host: High Definition Audio rev. 1.0
Sep  1 05:45:23 test /netbsd: ppb0 at pci0 dev 28 function 0: Intel 
product 0x2940 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: pci1 at ppb0 bus 1
Sep  1 05:45:23 test /netbsd: pci1: no spaces enabled!
Sep  1 05:45:23 test /netbsd: ppb1 at pci0 dev 28 function 1: Intel 
product 0x2942 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: pci2 at ppb1 bus 2
Sep  1 05:45:23 test /netbsd: pci2: i/o space, memory space enabled, 
rd/line, wr/inv ok
Sep  1 05:45:23 test /netbsd: pciide0 at pci2 dev 0 function 0
Sep  1 05:45:23 test /netbsd: pciide0: Marvell product 0x6101 (rev. 0xb1)
Sep  1 05:45:23 test /netbsd: pciide0: bus-master DMA support present, 
but unused (no driver support)
Sep  1 05:45:23 test /netbsd: pciide0: primary channel configured to 
native-PCI mode
Sep  1 05:45:23 test /netbsd: pciide0: using ioapic0 pin 17 (irq 9) for 
native-PCI interrupt
Sep  1 05:45:23 test /netbsd: atabus0 at pciide0 channel 0
Sep  1 05:45:23 test /netbsd: pciide0: secondary channel configured to 
native-PCI mode
Sep  1 05:45:23 test /netbsd: atabus1 at pciide0 channel 1
Sep  1 05:45:23 test /netbsd: ppb2 at pci0 dev 28 function 2: Intel 
product 0x2944 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: pci3 at ppb2 bus 3
Sep  1 05:45:23 test /netbsd: pci3: no spaces enabled!
Sep  1 05:45:23 test /netbsd: ppb3 at pci0 dev 28 function 3: Intel 
product 0x2946 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: pci4 at ppb3 bus 4
Sep  1 05:45:23 test /netbsd: pci4: no spaces enabled!
Sep  1 05:45:23 test /netbsd: ppb4 at pci0 dev 28 function 4: Intel 
product 0x2948 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: pci5 at ppb4 bus 5
Sep  1 05:45:23 test /netbsd: pci5: no spaces enabled!
Sep  1 05:45:23 test /netbsd: uhci3 at pci0 dev 29 function 0: Intel 
product 0x2934 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: uhci3: interrupting at ioapic0 pin 23 (irq 11)
Sep  1 05:45:23 test /netbsd: usb4 at uhci3: USB revision 1.0
Sep  1 05:45:23 test /netbsd: uhub4 at usb4
Sep  1 05:45:23 test /netbsd: uhub4: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub4: 2 ports with 2 removable, self powered
Sep  1 05:45:23 test /netbsd: uhci4 at pci0 dev 29 function 1: Intel 
product 0x2935 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: uhci4: interrupting at ioapic0 pin 19 (irq 11)
Sep  1 05:45:23 test /netbsd: usb5 at uhci4: USB revision 1.0
Sep  1 05:45:23 test /netbsd: uhub5 at usb5
Sep  1 05:45:23 test /netbsd: uhub5: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub5: 2 ports with 2 removable, self powered
Sep  1 05:45:23 test /netbsd: uhci5 at pci0 dev 29 function 2: Intel 
product 0x2936 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: uhci5: interrupting at ioapic0 pin 18 (irq 10)
Sep  1 05:45:23 test /netbsd: usb6 at uhci5: USB revision 1.0
Sep  1 05:45:23 test /netbsd: uhub6 at usb6
Sep  1 05:45:23 test /netbsd: uhub6: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub6: 2 ports with 2 removable, self powered
Sep  1 05:45:23 test /netbsd: ehci1 at pci0 dev 29 function 7: Intel 
product 0x293a (rev. 0x02)
Sep  1 05:45:23 test /netbsd: ehci1: interrupting at ioapic0 pin 23 (irq 11)
Sep  1 05:45:23 test /netbsd: ehci1: BIOS has given up ownership
Sep  1 05:45:23 test /netbsd: ehci1: EHCI version 1.0
Sep  1 05:45:23 test /netbsd: ehci1: companion controllers, 2 ports 
each: uhci3 uhci4 uhci5
Sep  1 05:45:23 test /netbsd: usb7 at ehci1: USB revision 2.0
Sep  1 05:45:23 test /netbsd: uhub7 at usb7
Sep  1 05:45:23 test /netbsd: uhub7: Intel EHCI root hub, class 9/0, rev 
2.00/1.00, addr 1
Sep  1 05:45:23 test /netbsd: uhub7: 6 ports with 6 removable, self powered
Sep  1 05:45:23 test /netbsd: ppb5 at pci0 dev 30 function 0: Intel 
82801BA Hub-PCI Bridge (rev. 0x92)
Sep  1 05:45:23 test /netbsd: pci6 at ppb5 bus 6
Sep  1 05:45:23 test /netbsd: pci6: i/o space, memory space enabled
Sep  1 05:45:23 test /netbsd: fwohci0 at pci6 dev 3 function 0: Texas 
Instruments TSB43AA22/A IEEE 1394 Host Controller (rev. 0x00)
Sep  1 05:45:23 test /netbsd: fwohci0: interrupting at ioapic0 pin 19 
(irq 11)
Sep  1 05:45:23 test /netbsd: fwohci0: OHCI version 1.10 (ROM=0)
Sep  1 05:45:23 test /netbsd: fwohci0: No. of Isochronous channels is 4.
Sep  1 05:45:23 test /netbsd: fwohci0: EUI64 00:90:27:00:01:e2:07:26
Sep  1 05:45:23 test /netbsd: fwohci0: Phy 1394a available S400, 2 ports.
Sep  1 05:45:23 test /netbsd: fwohci0: Link S400, max_rec 2048 bytes.
Sep  1 05:45:23 test /netbsd: ieee1394if0 at fwohci0: IEEE1394 bus
Sep  1 05:45:23 test /netbsd: fwip0 at ieee1394if0: IP over IEEE1394
Sep  1 05:45:23 test /netbsd: fwohci0: Initiate bus reset
Sep  1 05:45:23 test /netbsd: pcib0 at pci0 dev 31 function 0
Sep  1 05:45:23 test /netbsd: pcib0: Intel product 0x2912 (rev. 0x02)
Sep  1 05:45:23 test /netbsd: piixide0 at pci0 dev 31 function 2
Sep  1 05:45:23 test /netbsd: piixide0: Intel 82801I Serial ATA 
Controller (ICH9) (rev. 0x02)
Sep  1 05:45:23 test /netbsd: piixide0: bus-master DMA support present
Sep  1 05:45:23 test /netbsd: piixide0: primary channel configured to 
compatibility mode
Sep  1 05:45:23 test /netbsd: piixide0: primary channel interrupting at 
ioapic0 pin 14 (irq 14)
Sep  1 05:45:23 test /netbsd: atabus2 at piixide0 channel 0
Sep  1 05:45:23 test /netbsd: piixide0: secondary channel configured to 
compatibility mode
Sep  1 05:45:23 test /netbsd: piixide0: secondary channel interrupting 
at ioapic0 pin 15 (irq 15)
Sep  1 05:45:23 test /netbsd: atabus3 at piixide0 channel 1
Sep  1 05:45:23 test /netbsd: Intel product 0x2930 (SMBus serial bus, 
revision 0x02) at pci0 dev 31 function 3 not configured
Sep  1 05:45:23 test /netbsd: piixide1 at pci0 dev 31 function 5
Sep  1 05:45:23 test /netbsd: piixide1: Intel 82801I Serial ATA 
Controller (ICH9) (rev. 0x02)
Sep  1 05:45:23 test /netbsd: piixide1: bus-master DMA support present
Sep  1 05:45:23 test /netbsd: piixide1: primary channel wired to 
native-PCI mode
Sep  1 05:45:23 test /netbsd: piixide1: using ioapic0 pin 21 (irq 11) 
for native-PCI interrupt
Sep  1 05:45:23 test /netbsd: atabus4 at piixide1 channel 0
Sep  1 05:45:23 test /netbsd: piixide1: secondary channel wired to 
native-PCI mode
Sep  1 05:45:23 test /netbsd: atabus5 at piixide1 channel 1
Sep  1 05:45:23 test /netbsd: isa0 at pcib0
Sep  1 05:45:23 test /netbsd: com0 at isa0 port 0x3f8-0x3ff irq 4: 
ns16550a, working fifo
Sep  1 05:45:23 test /netbsd: isapnp0 at isa0 port 0x279: ISA Plug 'n 
Play device support
Sep  1 05:45:23 test /netbsd: isapnp0: no ISA Plug 'n Play devices found
Sep  1 05:45:23 test /netbsd: ioapic0: enabling
Sep  1 05:45:23 test /netbsd: timecounter: Timecounter "clockinterrupt" 
frequency 100 Hz quality 0
Sep  1 05:45:23 test /netbsd: azalia0: codec[2]: Realtek ALC888 (rev. 0.1)
Sep  1 05:45:23 test /netbsd: azalia0: codec[2]: High Definition Audio 
rev. 1.0
Sep  1 05:45:23 test /netbsd: azalia0: playback: max channels=8, 
encodings=1<PCM>
Sep  1 05:45:23 test /netbsd: azalia0: playback: PCM 
formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
Sep  1 05:45:23 test /netbsd: azalia0: recording: max channels=4, 
encodings=1<PCM>
Sep  1 05:45:23 test /netbsd: azalia0: recording: PCM 
formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
Sep  1 05:45:23 test /netbsd: audio0 at azalia0: full duplex, independent
Sep  1 05:45:23 test /netbsd: Kernelized RAIDframe activated
Sep  1 05:45:23 test /netbsd: wd0 at atabus2 drive 0: <WDC WD2500JS-22NCB1>
Sep  1 05:45:23 test /netbsd: wd0: drive supports 16-sector PIO 
transfers, LBA48 addressing
Sep  1 05:45:23 test /netbsd: wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 
512 bytes/sect x 488397168 sectors
Sep  1 05:45:23 test /netbsd: wd0: 32-bit data port
Sep  1 05:45:23 test /netbsd: wd0: drive supports PIO mode 4, DMA mode 
2, Ultra-DMA mode 6 (Ultra/133)
Sep  1 05:45:23 test /netbsd: wd0(piixide0:0:0): using PIO mode 4, 
Ultra-DMA mode 6 (Ultra/133) (using DMA)
Sep  1 05:45:23 test /netbsd: boot device: wd0
Sep  1 05:45:23 test /netbsd: root on wd0a dumps on wd0b
Sep  1 05:45:23 test /netbsd: root file system type: ffs
Sep  1 05:45:23 test /netbsd: cpu1: CPU 1 running
Sep  1 05:45:23 test /netbsd: wsdisplay0: screen 1 added (80x25, vt100 
emulation)
Sep  1 05:45:23 test /netbsd: wsdisplay0: screen 2 added (80x25, vt100 
emulation)
Sep  1 05:45:23 test /netbsd: wsdisplay0: screen 3 added (80x25, vt100 
emulation)
Sep  1 05:45:23 test /netbsd: wsdisplay0: screen 4 added (80x25, vt100 
emulation)
Sep  1 05:45:24 test savecore: no core dump
Sep  1 05:45:38 test /netbsd: usbd_new_device: set address 2 failed - 
trying a port reset
Sep  1 05:46:22 test last message repeated 2 times
Sep  1 05:46:38 test /netbsd: usb_new_device: set address 2 failed
Sep  1 05:46:38 test /netbsd: uhub_explore: usb_new_device failed, 
error=SET_ADDR_FAILED
Sep  1 05:46:38 test /netbsd: uhub2: device problem, disabling port 2