NetBSD 4.0 on Wrap PCEngines

[Menuhin Saitov <menuhin%web.de@localhost>]

Hi,
I've installed NetBSD 4.0 on wrap pcengines and it works but i have a problem 
with
the wlan mini pci GIGABYTE GN-WIKG, it ist recognized with the ral driver.
I can set IP to the card but the card doesnt get connection to router.
The Router is not problem cause i've tested on the work.
I took a i386 Port for the wrap is that right?

Here is dmesg from the wrap?

<snip>
wrap# dmesg | grep ral0
ral0 at pci0 dev 13 function 0: Ralink Technologies RT2560 802.11b/g (rev. 0x01)
ral0: interrupting at irq 12
ral0: 802.11 address 00:14:85:b6:61:c4
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M
bps 48Mbps 54Mbps

<snip>

Here is output from ifconfig.
<snip>
wrap# ifconfig ral0
ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1400
        ssid belkin54g
        powersave off
        chan 11
        address: 00:14:85:b6:61:c4
        media: IEEE802.11 autoselect mode 11g (DS1 mode 11g)
        status: no network
        inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::214:85ff:feb6:61c4%ral0 prefixlen 64 scopeid 0x1

<snip>

I set it the ip with:

ifconfig ral0 inet 192.168.1.2 netmask 255.255.255.0 ssid belkin54g mode 11g 
chan 11

Its the right ssid and the mode and channel

Thanks in Advance


Menuhin

-- 
Menuhin Saitov          htt://www.msaitov.de